HDTV ENCODER DM-JV600U INSTRUCTIONS POWER ON OFF For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. This instruction book is made from 100% recycle paper. Model No. DM-JV600U Serial No.
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6.
SAFETY PRECAUTIONS CAUTION ATTENTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ELECTROCUTION NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.
Main Features Encoded to MPEG-2(ISO/IEC13818-2) Thank you for purchasing this HDTV ENCODER DM-JV600U. Input SMPTE292M(1080i/720p) standard HDTV digital serial video signal, encode it to MPEG-2(ISO/IEC13818-2) and output as DVB-ASI TS(Transport Stream). Supports SDI embedded Audio signal 2 channels Encodes SMPTE299M standard SDI embedded Audio signal 2 channels to MPEG-1Layer 2 (ISO/IEC11172-3) and output as TS format.
Table of Contents Main Features ...................................... 4 Table of Contents ................................. 5 Precautions .......................................... 6 Names and Functions Front Panel ........................................... 7 Rear Panel ........................................... 8 Preparation Connecting ........................................... 9 Mounting to a Rack ............................ 10 Menu setting Menu Flow Chart ................................
Precautions Maintenance and operating environment Transportation Do not store or use this equipment in the following environments. This will cause malfunctioning and damage. Turn off the power and unplug the power cord from AC outlet before transportation. This may cause damage to power cord, fire or electrical shock. When moving or carrying the main unit, do no hold it by the front panel as this can easily be detached by pulling it toward you.
Front Panel 6 5 4 1 POWER POWER MULTI FORMAT HIGH DEFINITION TELEVISION ENCODER ENTER Switch to turn on/off power. After this is switched to ON, a “Now Initializing” will be displayed on the Display 5 of front panel before normal screen is displayed. ON OFF 7 1 [POWER] Power switch ESC 3 2 About Display Names and Functions FAULT Normal display HDTV ENCODER DM-JV600U After turning on the power, it may take 2 secMemo onds before display light up.
Rear Panel 8 9 0 AC 120V ~ 50 Hz/60 Hz IN HDSDI MONI OUT ! 2 RS-232C Input terminal for digital audio signal (PCM or Dolby™ Digital bitstream). Connect to the digital audio signal output terminal of the device outputting audio signal. Input terminal for HD serial digital video signal. This terminal also receives audio signal when audio signal is embedded into HD serial digital video signal. Connect to the HD serial digital video signal output terminal of the device outputting video signal.
Connecting One example of the basic systems using this unit is described below. Turn OFF the power of all devices before connecting or disconnecting.
Mounting to a Rack By making use of the hole on inner side of front panel, this unit can be mounted to EIA rack. Caution • When mounting this unit to rack, mount the L shape bracket to both ends of the rack to ensure strength. • When mounting to the rack, mount it in the way such that this unit will not protrude out from the rack.
Menu Flow Chart The menu of this unit consists of 3 level of menus namely “Main menu”, “Sub menu” and “Setting items”. Display screen Menu Item Main Menu Sub Menu Setting HDTV ENCODER DM-JV600U ENTER ENTER ESC Configuration Menu + Operate Param Menu “Operate Param Menu” Configuration Menu + Initial Param Menu ☞ Page 13 “Initial Param Menu” Current operation status and error log can be confirmed.
Menu Setting Configuration Menu : Default setting Item Operate Param Menu Video Rate Content Memo 9000kbps to 20000kbps to 40000kbps Set the bit rate of the encoded video signal. The setting value can be set in 10 kbps step. Asp When the Video Mode item in the menu is set to “1080i” 16:9 1920 × 1080 16:9 1440 × 1080 16:9 1280 × 1080 When the Video Mode item in the menu is set to “720p” 16:9 1280 × 720 Set the horizontal size of the encoded video signal.
Configuration Menu : Default setting Item Initial Param Menu Control Mode Start Mode Setting value Content Local Remote Set the operation mode of this unit. Local : Set to this mode when operating this unit using the buttons on the front panel. Remote : Set to this mode when using RS-232C terminal $ on the rear panel to perform remote control of this unit. Auto Manual Set the starting mode of encoding. Auto : Start the encoding automatically. Manual : Start the encoding using the menu.
Menu Setting Configuration Menu (continued) : Default setting Item Setting value Content ON OFF Set the PSI (Program Specific Information) to ON/ OFF. ON : PAT and PMT will be output. OFF : PAT and PMT will not be output. PAT TS ID 0001 to 0001 to FFFF Set the ID of PAT TS. PAT TS ID is the Transport Stream ID within PAT. PAT (Program Association Table) is the correspondences table of Program number and PMT PID. PMT PID 0010 to 0010 to 1FFE Set the PMT Packet ID.
Configuration Menu (continued) : Default setting Initial Param Menu Audio Stream ID Setting value Content Memo C0 to C0 to DF Set the ID of Audio PES stream. Video Copyright OFF ON Set the copyright flag of Video PES. OFF : Set the copyright flag of Video PES to OFF. ON : Set the copyright flag of Video PES to ON. Video Org/Copy Org Copy Set the Original/ Copy of Video PES. Org : Set the Video PES to Original. Copy : Set the Video PES to Copy.
How to Change Menu Setting The various features of this unit can be set using the menu. The setting value, which is stored in the internal memory will reappear upon turning on the power. Example Remote control of this unit can be achieved by using the RS-232C terminal on the rear panel.
Restoring the Default Menu Setting Value Each feature that has been set using the menu can be returned to default (factory setting). All the menu settings return to default. Display Flow Chart Press the ENTER button Main Menu Main Menu screen will be displayed. +Configuration Menu Press the 8 / 9 buttons Main Menu Select the Configuration Menu. +Configuration Menu Press the ENTER button Configuration Menu Configuration Menu screen will be displayed.
Starting the Encoding There are 2 ways to start the encoding. One is to start the encoding automatically and the other one is to start it manually by setting the menu.
☞ Start the encoding manually Memo Operation Flow Chart Display Flow Chart Press the ENTER button Main Menu Main Menu screen will be displayed. +Configuration Menu Press the 8 / 9 buttons Configuration Menu Select the Configuration Menu and press the ENTER button. Press the 8 / 9 buttons Select the Operate Param Menu and press the ENTER button. The encoding will stop if menu item has been changed during manual encoding and “>Save&Reboot” has been excecuted.
Checking Operation Status The operation status of this unit can be confirmed from the display. Display 8 / 9 / ; / :buttons POWER POWER FAULT MULTI FORMAT HIGH DEFINITION TELEVISION ENCODER ENTER ON ESC OFF ENTER ESC button button Operation Flow Chart Display Flow Chart Press the ENTER button Main Menu Main Menu screen will be displayed. +Configuration Menu Press the 8 / 9 buttons Main Menu Select the Status Menu. +Status Menu Press the ENTER button Status Menu screen will be displayed.
Checking Error Log The error occurrence can be confirmed on the display. Up to 64 occurrences can be stored. Display Flow Chart Press the ENTER button Main Menu Main Menu screen will be displayed. +Configuration Menu Press the 8 / 9 buttons Main Menu Select the Status Menu. +Status Menu Press the ENTER button Status Menu Status Menu screen will be displayed. -Status Press the 8 / 9 buttons Status Menu Select the Log item and press the ENTER button.
Using the Administration Menu The information regarding built-in program or firmware version can be obtained from the Administration Menu. In addition, clock setting and the display brightness could be adjusted. * Please carry out the clock setting before use. 8 / 9 / ; / :buttons Display Examples of setting Setting the clock using the Administration Menu screen.
Administration menu Item Content Model Displays the model name. SerNo Displays the serial number. Time Setting the Clock. Year/Month/Day Hour : Minute (For the Year setting, only the last 2 digits of the year will be used) FL Brghtness (Initial Setting: 0) Setting the Display brightness. Firm Displays the firmware version. Ucode Displays the version of the µ code. Boot Displays the version of boot program. MISC FPGA Displays the version of MISC FPGA.
Error Log The stored error log can be displayed by performing the operation on page 21 “Checking Error Log”. The error content is displayed by error code. Display a b c d e a: Error log No. b: Error occurrence date c: Error occurrence time d: Error code e: Error content 00 : Feb07 14 : 06 0001 -system boot * For the error content with plenty of characters, press the ; / : buttons to scroll the display. * The date and hour of this unit is adjusted to Greenwich Mean Time (GMT).
Error code Error code:Error content Cause of error Troubleshooting 0002: parameter error The content of the internal parameter (default parameter and others) is abnormal. 0008: FAN stop error FAN operation is abnormal. This unit is abnormal. Switch the power to “OFF” and turn on the power again. Consult your local JVC dealer if the problem is still unsolved. 0009: FAN stop error recover 001a: FAN stop timeout error 0013: hardware fatal error The hardware of this unit is abnormal.
Setting the 3-2 Pulldown Encoding image film material It is required to convert the video signal (Pulldown) in order to view the image recorded with 24 frames per second such as movie film on a system for HDTV video signal that is 30 frames per second (60 field) used in TV broadcasting. Normally, HDTV VTR utilize 3 - 2 Pulldown (Telecine) method to achieve image signal conversion before recording on tape.
Specifications Video input HD SDI IN ×1 SMPTE292M (common for 1080i/720p) SMPTE299M (Embedded Audio) 800 mVp-p, 75 Ω (BNC unbalanced) 1080i:1920 × 1080 frame frequency 29.97Hz 720p:1280 × 720 frame frequency 59.
DM-JV600U HDTV ENCODER VICTOR COMPANY OF JAPAN, LIMITED ¨ ¨ is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.