Pan/Tilt Head Operation Manual

2. PAN & TILT HEAD SPECIFICATIONS:

CHARACTERISTICS:

Operating Environment ................................................Indoor

Temperature.................................................................40 to 104 degrees F. (0 to 40 degrees C.)

Pan Rotation ................................................................260 degrees with adjustable limit switches

Tilt Angle ......................................................................+/- 45 degrees with adjustable limit switches

Pan Speed ...................................................................Continuously variable to 15 degrees/second

Tilt Speed .....................................................................Continuously variable to 7.5 degrees/second

Load Mounting..............................................................Side loading with alignment of image plane

and center of rotation

Capacity .......................................................................8 pounds

AN/TILT CONTROL:

Pan/Tilt .........................................................................0 to +12 VDC (DC coreless motor)

Presets .........................................................................Yes

Max. distance between controller & p/t head................2,000 feet (Contact ESI for longer distances)

Interface to Controller...................................................RS-422 differential over 4 wire cable

..................................................RS-232 Interface for Controller/computer

control and dual controllers

Special Functions .........................................................Externally accessible DIP switches

ENS CONTROL:

Focus ...........................................................................Teleconferencing and CCTV lenses

Zoom ............................................................................Teleconferencing and CCTV lenses

Iris (Optional)................................................................Teleconferencing and CCTV lenses

Multi-Lens Control ........................................................Different lens configurations selected from

Internal Jumper settings

Lens Interface Cable ....................................................Available (see Interface Cable Design Guide)

Presets .........................................................................Zoom & focus

PHYSICAL CHARACTERISTICS:

Size (surface mount) ...................................................4.5 (W) X 7.5 (H) X 3.5 (D) inches

Weight ..........................................................................5 Pounds

Mounting ......................................................................4 mounting holes (1 15/16 x 4 15/16)

OWER INPUT REQUIREMENTS:

Voltage .........................................................................+15 VDC unregulated

Current .........................................................................0.8 Amperes

Power ON Switch .........................................................Yes, located on Pan & Tilt base

Power ON Indicator ......................................................Yes, located on Pan & Tilt base

Power Adapter..............................................................Supplied with Pan & Tilt head

Power Input ..................................................................From either supplied power adapter

or other appropriate DC power source

2/12/05 Document D0153