User's Manual
Table Of Contents
- COVER
- SAFETY FIRST
- CONTENTS
- DISC INFORMATION
- INDEX
- INSTALLING YOUR NEW UNIT
- INITIAL SETTINGS
- BASIC OPERATIONS ON DVD DECK
- Basic Playback
- Playback Features
- Locating A Desired Scene Using The DVD Menu
- Locating The Start Point Of The Item Or Skip The Item
- Variable Speed Search
- Still Picture/Frame-By-Frame Playback
- Slow Motion
- Skip Search
- One Touch Replay
- Jump Search
- Resume Function
- Marking Positions To Play Back Again Later
- Checking The Time Information
- Angle Selection
- Subtitle Selection
- Audio Channel Selection
- Audio Language/Sound Selection
- Playback Control (PBC) Function
- Using The On-screen Bar
- How To Access The On-screen Bar
- Basic Operation On The On-screen Bar
- Repeat Playback
- A-B Repeat Playback
- Locating The Beginning Of A Desired Selection
- Time Search
- Simulated Surround Effect
- Adjusting The Picture Quality
- Setting The Progressive Mode
- Programme Playback
- Random Playback
- Select The Switching Interval Of The Slide Show
- Parental Lock
- Basic Recording
- Recording Features
- BASIC OPERATIONS ON HDD DECK
- BASIC OPERATIONS ON DV DECK
- LIVE MEMORY PLAYBACK ON HDD/DVD DECK
- TIMER RECORDING ON HDD/DVD DECK
- NAVIGATION ON HDD/DVD DECK
- EDITING
- REMOTE CONTROL
- SYSTEM CONNECTIONS
- SUBSIDIARY SETTINGS
- TROUBLESHOOTING
- APPENDIX
- SPECIFICATIONS
- LIST OF TERMS
![](/manual/jvc/dr-dx5/user-s-manual-english/images/img-80.png)
Filename [DX5SEU_13Subsidiary.fm]
Masterpage:Left+
80 EN
SUBSIDIARY SETTINGS
Page 80Wednesday, 23 November 2005 14:13
If you connect the unit and TV with Component Video Connection
(A pg. 16), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction of
higher-quality images.
8 Interlaced scan
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
8 Progressive scan
Progressive scan displays all the horizontal lines of a picture at one
time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press PROGRESSIVE SCAN for 3 or more seconds.
● Video output indicator (q) lights on the front display panel if
Progressive scan mode has been established. (A pg. 12)
● Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
● When the progressive mode is set, be sure to set AL-1 OUTPUTB
to ACOMPONENTB (A pg. 63). Progressive scan is output only
from [COMPONENT VIDEO OUT] connector.
● Interlaced scan mode is the setting at your purchase.
● Interlaced scan mode might be suitable depending on video
material.
● Scan mode cannot be set while menu screen is displayed.
● When the Progressive scan mode is engaged, no video signal is
output from [L-1 IN/OUT] connector.
You can lock the disc tray to prohibit the unwanted disc ejection by
children.
To lock tray
While the unit is turned off, press and hold o, then press M on the
unit. ALOCKB appears on the front display panel and the disc tray
is locked.
To unlock tray
While the unit is turned off, press and hold o, then press M on the
unit. AUNLOCKB appears on the front display panel.
Scan Mode Set (HDD & DVD Deck Only)
ATTENTION:
Your TV needs to be compatible with PAL Progressive.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
PROGRESSIVE SCAN
DVD
HDD
CABLE/SAT
DVDTV
Tray Lock (DVD Deck Only)
● Turn off the unit.
o
M
DX5SEU_00.book Page 80 Wednesday, November 23, 2005 2:13 PM