Filename [DR-M10AG_AX_AA2_02Cov1.fm] DR-M10SAG_AX_AA2_01.
Filename [DR-M10AG_AX_AA2_03Safety.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 2 Thursday, May 6, 2004 10:46 AM 2 EN Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
Filename [DR-M10AG_AX_AA2_03Safety.fm] Masterpage:Right-No-Heading DR-M10AG_AX_AA2_03Safety.fm Page 3 Friday, May 14, 2004 4:58 PM EN POWER SYSTEM: (DR-M10SAG/SAX only*) This unit operates on voltage of AC110 – 240 Vd (Rating), AC90 – 260 Vd (Operating), 50/60 Hz with automatic switching. * The model number depends on the country where you live. Check the label on the rear of the unit.
Filename [DR-M10AG_AX_AA2_01TOC.fm] Masterpage:Left DR-M10SAG_AX_AA2_01.book Page 4 Thursday, May 6, 2004 10:46 AM 4 EN SAFETY FIRST CONTENTS 2 Safety Precautions ............................................... 2 DISC INFORMATION 5 About Discs ......................................................... 5 INDEX 10 INSTALLING YOUR NEW UNIT 16 Basic Connections ............................................. 16 S-VIDEO Connection ........................................ 17 Component Video Connection ..
Filename [DR-M10AG_AX_AA2_05DiscInfo.fm] Masterpage:Right0 EN DISC INFORMATION About Discs Recordable/playable discs You can use discs with the following logos for recording and playback. DVD-RAM DVD-R 12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB (VR mode) Version 2.0 Version 2.1 12 cm: 4.7 GB 8 cm: 1.4 GB General Version 2.0 (Video mode) DVD-RW 12 cm: 4.7 GB Version 1.0 (VR mode) Version 1.1 (Video mode /VR mode) ● The above table is based on the information as of February 2004.
Filename [DR-M10AG_AX_AA2_05DiscInfo.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 6 Thursday, May 6, 2004 10:46 AM 6 EN DISC INFORMATION (cont.) Discs for Playback Only Unplayable Discs You can use discs with the following logos for playback only. The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms).
Filename [DR-M10AG_AX_AA2_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 7 Thursday, May 6, 2004 10:46 AM EN Recording Medium and Format File Structure of Discs DVD-RAM DVD VIDEO ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts.
Filename [DR-M10AG_AX_AA2_05DiscInfo.fm] Masterpage:Left+ 8 EN DISC INFORMATION (cont.) JPEG/MP3 Disc (CD-R/RW/ROM) MP3/JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories (groups) by the MP3/JPEG Navigation of this unit. (墌 pg. 74) File structure of a disc before starting the MP3/JPEG Navigation File structure of the disc after started ib(JT*0 Tc:2_293.[2(iale 82(i6 82i( n)-g the M0 0 9.96 igatInfo.
Filename [DR-M10AG_AX_AA2_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 9 Thursday, May 6, 2004 10:46 AM EN Placing a Disc Care and Handling of Discs Opening the disc tray Press x on the unit or remote control to open the disc tray. REC MODE LIVE CHECK OPEN/ SET UP DISPLAY ON SCREEN CLOSE REC MODE REC LINK AUDIO SUBTITLE ANGLE PROGRESSIVE SCAN DV S-VIDEO VIDEO DV IN L(MONO)-AUDIO-R Unit How to handle discs When handling a disc, do not touch the surface of the disc.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 10 Thursday, May 6, 2004 10:46 AM 10 EN INDEX FRONT VIEW A B C D E FGH I J REC MODE REC LINK 1 STANDBY/ON F1 DV S-VIDEO K VIDEO L A Infrared Beam Receiving Window B Front Display Panel 墌 pg. 12 C Disc Tray D Open/Close Button (x) 墌 pg. 9 E Automatic Satellite Programme Recording Button (REC LINK) 墌 pg. 61 F Stop Button (8) 墌 pg. 25, 47 G Play Button (4) 墌 pg. 25 H Pause Button (9) 墌 pg.
Filename [DR-M10AG_AX_AA2_06Name.fm] DR-M10SAG_AX_AA2_01.book Page 11 Thursday, May 6, 2004 10:46 AM Masterpage:Right-No-Heading EN 11 REAR VIEW A Antenna Input Connector (ANTENNA IN) 墌 pg. 16 B Component Video Output Connectors (COMPONENT VIDEO OUT )墌 pg. 18 C S-video Output Connector (S-VIDEO OUT) 墌 pg. 17 D Audio Output Connectors (AUDIO OUT (RIGHT/LEFT)) 墌 pg. 17 E Digital Audio Output Connectors (DIGITAL OUT (COAXIAL/OPTICAL)) 墌 pg. 82, 86 F Cooling Fan G Mains Power Cord 墌 pg.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left+ 12 EN INDEX (cont.) FRONT DISPLAY PANEL A Disc Type/Status Indicator When a disc is loaded, the type of the disc is indicated. When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback. During Slow Motion: Rotate slower than normal playback. While recording: Inner red ring lights in the same way as normal playback. During Instant Timer Recording (ITR), inner red ring slowly blinks.
Filename [DR-M10AG_AX_AA2_06Name.fm] DR-M10SAG_AX_AA2_01.book Page 13 Thursday, May 6, 2004 10:46 AM Masterpage:Right-No-Heading EN G Simulated Surround Effect Indicator (3D) 墌 pg. 40 Lights when a simulated surround effect is set to “3D-ON” in Play Set Up menu. H Linear PCM Indicator (LPCM) Lights when “XP MODE REC AUDIO” is set to “LINEAR PCM” (墌 pg. 89) for recording with DVD-RAM, DVD-R and DVD-RW discs, and when Linear PCM audio is played. I Random/Programme Playback Mode Indicator (RND/PRGM) 墌 pg.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 14 Thursday, May 6, 2004 10:46 AM 14 EN INDEX (cont.) ON-SCREEN DISPLAY When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN again. A Disc Display Displays the type of the disc loaded on the disc tray. B Title Number* Displays number of the title currently being played back.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 16 Thursday, May 6, 2004 10:46 AM 16 EN INSTALLING YOUR NEW UNIT Basic Connections It’s essential that your unit be properly connected. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. A Check the contents. Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 105. TV aerial cable B Install the unit.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 17 Thursday, May 6, 2004 10:46 AM EN 17 8 To connect to TV’s S-VIDEO input and AUDIO input connectors S-VIDEO Connection A Connect the unit to a TV. A Connect the aerial, unit and TV as per “Basic Connections”. (墌 pg. 16) B Connect the unit’s S-VIDEO OUT connector to the TV’s S-VIDEO input connector. C Connect the unit’s AUDIO OUT connectors to the TV’s AUDIO input connectors. B Connect the unit to mains.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left+ 18 EN Component Video Connection INSTALLING YOUR NEW UNIT (cont.) Component video connection enables you to obtain high-quality component video pictures. 8 To connect to TV’s component video input connectors A Connect the unit to TV. A Perform A – C in step C in “Basic Connections” (墌 pg. 16). B Connect the unit’s COMPONENT VIDEO OUT connectors to the TV’s component video input connectors.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Right0 DR-M10AG_AX_AA2_06Name.fm Page 19 Monday, May 10, 2004 1:27 PM EN INITIAL SETTINGS Auto Set Up 19 Before starting, make sure of the following: ● The TV aerial cable should be connected to the unit. ● The unit’s mains power cord should be connected to a mains outlet. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 20 Thursday, May 6, 2004 10:46 AM 20 EN D Perform Auto Channel Set. Press ENTER. DO NOT press any button on the unit or remote control while Auto Set Up is in progress. ● Receivable channels in your area are automatically assigned to the CH +/– buttons, and non-receivable channels are skipped. ● When Auto Set Up is completed, the lowest position number will appear on the front display panel.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 21 Thursday, May 6, 2004 10:46 AM EN Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. A Access the Main Menu screen. Press SET UP. B Access the “VIDEO IN/OUT” screen.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left+ 22 EN INITIAL SETTINGS (cont.) On-screen Language Set Language This unit offers you the choice to view on-screen messages in 10 different languages. You can change the language setting manually as required. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. A Access the Main Menu screen. Press SET UP.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 23 Thursday, May 6, 2004 10:46 AM EN 23 Menu/Audio/Subtitle Language Set TV DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ CH TV DVD Some DVD discs contain the DVD menu display, audio and subtitles in multiple languages. With these discs, you can set the default language as you like. ● The procedure shows how to set “MENU LANGUAGE” as an example.
Filename [DR-M10AG_AX_AA2_06Name.fm] Masterpage:Left+ 3Column DR-M10SAG_AX_AA2_01.book Page 24 Thursday, May 6, 2004 10:46 AM 24 EN INITIAL SETTINGS (cont.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right0 DR-M10SAG_AX_AA2_01.book Page 25 Thursday, May 6, 2004 10:46 AM EN PLAYBACK OPERATIONS 25 To play back an MP3/JPEG disc, see “Playback with MP3/JPEG Navigation” (墌 pg. 74). Basic Playback A Load a disc. A Press x to open the disc tray. B Place the disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 9). ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ 26 EN PLAYBACK OPERATIONS (cont.) Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. TV STANDBY/ON TV DVD TV TV/ MUTING VIDEO 0–9 DEF GHI JKL MNO PQRS TUV WXYZ NOTE: When “X” appears on the TV screen in step 1, the disc does not have a top menu or disc menu.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading EN 27 High-Speed Search Resume Function During playback, press 5 for forward high-speed search, or 3 for reverse high-speed search. It is possible to memorise the position where you stop playback and resume playback from that position. ● Be sure to set “RESUME” to “ON” or “DISC RESUME”. (墌 pg. 91) ● Each press of the button increases the search speed for each direction. ● To resume normal playback, press 4.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 28 Thursday, May 6, 2004 10:46 AM 28 EN PLAYBACK OPERATIONS (cont.) NOTES: TV DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO TV DVD TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ ● When a monaural programme or bilingual programme changes to a stereo programme while recording, a mark signal is automatically recorded.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading EN 29 Angle Selection You can enjoy a variety of scene angles if a DVD VIDEO disc contains “multi-angle” parts, where the same scene was shot from different angles. If the disc contains “multi-angle” parts, “ ” appears on the TV screen at the beginning of the “multi-angle” part. 1 Access Angle display. 2 Select the angle. Press ANGLE or w e to select your desired angle. ● Each time you press ANGLE or w e, the angle changes.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 30 Thursday, May 6, 2004 10:46 AM 30 EN PLAYBACK OPERATIONS (cont.) 0–9 NOTE: TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ It is not possible for DVD-R/DVD-RW (Video mode) disc playback to switch the audio channel. The audio channel is played back as set in “AUDIO REC” (墌 pg. 89).
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading EN Recording/playback status display Live Memory Playback TV This unit records pictures onto DVD-RAM discs, instead of video tapes, then plays back the pictures recorded on the discs. This makes it possible to achieve high-speed writing and read-out that has not been possible with conventional VCRs, enabling recording and playback simultaneously.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ 32 EN PLAYBACK OPERATIONS (cont.) Overview of Live Memory Playback You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. This is called “Live Memory Playback”. NOTES: ● Live Memory Playback cannot be performed for approximately 30 seconds after recording has started.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 33 Thursday, May 6, 2004 10:46 AM EN 33 Display during Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the orange or blue bar on the TV screen.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ 34 EN PLAYBACK OPERATIONS (cont.) Buttons to be used during Live Memory Playback TV DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO ABC TV DVD Available buttons TV VOLUME DEF GHI JKL MNO PQRS TUV WXYZ 6 Functions ● Pressing once skips forward to the beginning of the next chapter being played back. ● Pressing down for 2 or more seconds during playback advances playback at 5 times the normal speed while pressed.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 35 Thursday, May 6, 2004 10:46 AM EN To play back from the beginning of the programme while recording ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. TV DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO DEF GHI JKL MNO PQRS TUV WXYZ AUX MEMO/MARK You can move back the playback position while continuing to record or timer record onto a DVD-RAM disc.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ 36 EN PLAYBACK OPERATIONS (cont.) Using Play Set Up Menu How to Access Play Set Up Menu Press ON SCREEN twice whenever a disc is loaded. Contents of Play Set Up Menu during playback DVD VIDEO Play Set Up Menu allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on Set Up Menu. Before using Play Set Up Menu Be sure to clear Library Database DVD Navi screen by pressing NAVIGATION.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 37 Thursday, May 6, 2004 10:46 AM EN 37 Basic operation on Play Set Up Menu TV DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO TV DVD Example: When selecting Picture Control function of DVD During playback or while stopped ABC DEF GHI JKL MNO PQRS TUV WXYZ CANCEL 1 Access Play Set Up Menu. TV VOLUME Press ON SCREEN twice. ● The item currently selected is highlighted and pointed by H.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 38 Thursday, May 6, 2004 10:46 AM 38 EN PLAYBACK OPERATIONS (cont.) Repeat Playback TV STANDBY/ON TV DVD TV TV/ MUTING VIDEO 0–9 DVD TV DVD You can repeat playback as you like according to the type of disc. TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 Access Play Set Up Menu. CH Press ON SCREEN twice. & CANCEL 2 Select the menu item.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 39 Thursday, May 6, 2004 10:46 AM EN A-B Repeat Playback 39 Locating the beginning of a desired selection You can repeat the desired part. During playback You can locate the beginning of a title, chapter, group or track. 1 Access Play Set Up Menu. During playback or while stopped Press ON SCREEN twice. 1 Access Play Set Up Menu. 2 Select the menu item. Press ON SCREEN twice.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 40 Thursday, May 6, 2004 10:46 AM 40 EN PLAYBACK OPERATIONS (cont.) Time Search Simulated Surround Effect You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a title (DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD and Audio CD). It is possible to get a simulated surround effect from your stereo system.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 41 Thursday, May 6, 2004 10:46 AM EN 41 Adjusting the picture quality Setting the progressive mode You can obtain optimal picture quality by selecting an appropriate picture mode. You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). 1 Access Play Set Up Menu. Press ON SCREEN twice. 2 Select the menu item.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ 42 EN PLAYBACK OPERATIONS (cont.) Programme Playback You can play back up to 30 tracks in the desired order. While stopped 1 Access Play Set Up Menu. Press ON SCREEN twice. 2 Select the menu item. Press w e to select “PRGM”, then press ENTER. ● The programme table appears under Play Set Up Menu. 3 Select the tracks in the desired order. Use number keys (1–9, 0) to enter the track numbers. If you have specified a wrong selection Press &.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 43 Thursday, May 6, 2004 10:46 AM EN B Access the “PARENTAL LOCK” screen. Parental Lock This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced by other scenes.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ 44 EN PLAYBACK OPERATIONS (cont.) To change the settings To temporarily release Parental Lock You can change the Parental lock settings later. When you set the parental lock level strictly, some discs may not be played back at all. When you insert such a disc and try to play it back, the confirmation screen appears on the TV screen, asking you whether you want Parental Lock to be temporarily released or not. A Change the level.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.
Filename [DR-M10AG_AX_AA2_07Playback.fm] Masterpage:Left+ DR-M10AG_AX_AA2_07Playback.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right0 EN RECORDING 47 C Set the recording speed. Basic Recording Press REC MODE repeatedly until the desired recording speed appears. ● Each time you press REC MODE, the recording speed changes as follows: XP ] SP ] LP ] EP ] FR60–FR360*, FR420, FR480 ] (Back to the beginning) ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. * The value is selectable from 1 to 6 hours in 5-min.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ 48 EN RECORDING (cont.) Recording Features Recording Speed MPEG2 format is used as recording format. As a guide for picture quality, the “bps” unit is used to represent how much data can be recorded per second. The larger this value is, the better the picture quality becomes but more capacity is required for the recording. Select XP or SP for programmes where quick movement occurs, such as sports programmes, and LP or EP for talk shows, etc.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 49 Thursday, May 6, 2004 10:46 AM EN 49 Record One Programme While Watching Another Receiving Stereo and Bilingual Programmes Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view. ● The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the unit’s CH buttons is recorded on the disc.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ 50 EN RECORDING (cont.) Free Rate Function To record the entire programme, the unit automatically set the appropriate recording speed depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right DR-M10SAG_AX_AA2_01.book Page 51 Thursday, May 6, 2004 10:46 AM EN TIMER RECORDING 51 G-CODE /SHOWVIEW System Setup TM TM The G-CODE timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-CODE number for the TV programme you wish to record (found in most TV listings) and the unit’s timer is automatically programmed.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ 52 EN TIMER RECORDING (cont.) G-CODE / SHOWVIEW Timer Programming TM Before performing the G-CODE Timer Programming: ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. ● Make sure that the unit’s built-in clock is set properly. ● Be sure to read “G-CODE /SHOWVIEW System Setup” on page 51 TM TM A Load a disc. You can programme this unit to timer-record as many as 8 programmes.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 53 Thursday, May 6, 2004 10:46 AM EN the following recording options as E Set required. A Press w e to select the desired option. B Press rt to select the desired setting, then press ENTER. “REC MODE” (墌 pg. 48, “Recording Speed”) (墌 pg. 50, “Free Rate Function”), “DAILY/WEEKLY” (in the right column, “Daily/Weekly Rec Function” ), “NAME” (墌 pg.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 54 Thursday, May 6, 2004 10:46 AM 54 EN TIMER RECORDING (cont.) A Load a disc. Manual Timer Programming A Press x to open the disc tray. B Place a recordable disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 9). C Press x to close the disc tray. You can programme this unit to timer-record as many as 8 programmes.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 55 Thursday, May 6, 2004 10:46 AM EN F Enter the recording stop time. Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. ● Each press of rt advances/goes back the stop time in 1-min. increments. ● To advance/go back the stop time in 30-min. increments, press and hold rt.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 56 Thursday, May 6, 2004 10:46 AM 56 EN TIMER RECORDING (cont.) To make the disc for On-Disc Timer Programming On-Disc Timer Programming A Load a disc. A Press x to open the disc tray. B Place a recordable disc on the disc tray. On-Disc Timer Programming is a function used with discs that are especially intended for a specific programme.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 57 Thursday, May 6, 2004 10:46 AM EN F Enter the recording stop time. Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. ● Each press of rt advances/goes back the stop time in 1-min. increments. ● To advance/go back the stop time in 30-min. increments, press and hold rt. G Enter the channel position. H Set “DAILY/WEEKLY” option.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ 58 EN TIMER RECORDING (cont.) How discs are overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode (Example 2) To record a 15-minute serial drama every morning in XP mode (Example 3) To record a 90-minute serial drama every Sunday in SP mode NOTE: On-Disc Timer Programming may not always work as these examples.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 59 Thursday, May 6, 2004 10:46 AM EN TV STANDBY/ON TV DVD TV TV/ MUTING VIDEO ABC & PROG/CHECK DVD TV VOLUME DEF GHI JKL MNO PQRS TUV WXYZ CANCEL TV DVD DVD 1 REC LINK G-CODE PROG/CHECK REC LINK TIMER SHOW VIEW TOP MENU NAVIGATION ENTER MENU RETURN PREVIOUS rtwe ENTER NEXT SLOW PLAY/SELECT SLOW REC STOP/CLEAR PAUSE C Access the programme screen.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 60 Thursday, May 6, 2004 10:46 AM 60 EN TIMER RECORDING (cont.) When programmes overlap each other TV & PROG/CHECK DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ CANCEL TV DVD If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK.
Filename [DR-M10AG_AX_AA2_08Recording.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 61 Thursday, May 6, 2004 10:46 AM EN Automatic Satellite Programme Recording This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the unit’s L-2 IN connector and programme the timer on the satellite receiver.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] DR-M10SAG_AX_AA2_01.book Page 62 Thursday, May 6, 2004 10:46 AM 62 EN Masterpage:Left0 NAVIGATION Library Database DVD Navi The Library Database DVD Navi enables you to search and select the desired programmes recorded on a DVD-RAM/R/RW disc very easily. You can record up to 99 programmes on a disc. Each time a programme is recorded on the disc, the information of the programme is registered for the Library Database DVD Navi automatically.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading EN Using Library Database DVD Navi system, you can easily modify registered information, edit the programme or play list, as well as search for the beginning of each programme. About registration of information The following information is automatically registered for each programme when ordinary recording or timer recording is performed, then stored in an area specified on the unit.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 64 Thursday, May 6, 2004 10:46 AM 64 EN NAVIGATION (cont.) Scan for Beginning(s) of Programme(s) You can scan the beginning of the programme easily with the Library Database DVD Navi. A Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. Press DVD 1.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading EN Modify Index Modify Original Information A Turn on the unit. Press DVD 1. B Access the Index screen. A Press NAVIGATION. The Library Database DVD Navi screen appears. B Press rt w e to move the arrow to “ORIGINAL”, then press ENTER. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Left+ DR-M10AG_AX_AA2_09Navigation.fm Page 66 Friday, May 7, 2004 2:53 PM 66 EN Modify Programme Name Perform steps A to C of “Modify Index” (墌 pg. 65) before continuing. NAVIGATION (cont.) Modify Category Perform steps A to C of “Modify Index” (墌 pg. 65) before continuing. A Access the modify screen. A Access the modify screen. B Enter new name. B Select new category. A Press rt w e to move the arrow to “MODIFY”, then press ENTER.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 67 Thursday, May 6, 2004 10:46 AM EN Delete programme You cannot record any more with Library Database DVD Navi once the registered programmes on the disc reach 99 programmes. Deleting unnecessary programmes after dubbing (墌 pg. 79, “Edit To Or From Another Recorder”) or other operations can increase remaining time and available recording capacity.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 68 Thursday, May 6, 2004 10:46 AM 68 EN NAVIGATION (cont.) Modify Play List Information Create Play List A Turn on the unit. Press DVD 1. B Load a disc. A Press x to open the disc tray. B Place a DVD-RAM or DVD-RW (VR mode) disc that was recorded with this unit on the disc tray. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. ● For details, refer to “Placing a Disc” (墌 pg. 9).
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 69 Thursday, May 6, 2004 10:46 AM EN H Return to the normal screen. Press NAVIGATION. NOTES: ● There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. ● The title, index and category of the play list can be modified in the same way as “ORIGINAL”. (墌 pg.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 70 Thursday, May 6, 2004 10:46 AM 70 EN D Set edit-in and edit-out points. A Find the point where you want the moved scene to begin, then press ENTER with the arrow on “IN”. The edit-in time is fixed and the elapsed playing time starts counting again. B Find the point where you want the moved scene to end, then press ENTER with the arrow on “OUT”. The edit-out time is fixed. C Press 4 to start playback.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 71 Thursday, May 6, 2004 10:46 AM EN Play back play list Perform steps A to C of “Create Play List” (墌 pg. 68) before continuing. A Select the play list(s). Press w e to move the arrow on the index (small still pictures) of the desired play list. ● When you want the plural play lists to be played back continuously, press MEMO after selecting the desired play lists.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 72 Thursday, May 6, 2004 10:46 AM 72 EN NAVIGATION (cont.) Modify Library Information Scan for Programme from library Programme information can be registered in the unit’s memory for up to 1,300 programmes. It is helpful when finding out on which disc the desired programme is recorded. A Press NAVIGATION. The Library Database DVD Navi screen appears.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 73 Thursday, May 6, 2004 10:46 AM EN Register disc Delete information A Turn on the unit. A Turn on the unit. B Load a disc. B Access the library screen. Press DVD 1. A Press x to open the disc tray. B Place a disc you want to register on the disc tray. 73 Press DVD 1. ● For details, refer to “Placing a Disc” (墌 pg. 9). C Press x to close the disc tray. A Press NAVIGATION.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Left+ 74 EN NAVIGATION (cont.) Playback with MP3/JPEG Navigation This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily. The following screen appears as the MP3/JPEG Navigation screen when you press NAVIGATION.
Filename [DR-M10AG_AX_AA2_09Navigation.fm] Masterpage:Right-No-Heading EN 75 Locating the desired group and tracks A Load a disc. A Press x to open the disc tray. B Place a disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 9). C Press x to close the disc tray. B Access the MP3/JPEG Navigation screen. Press NAVIGATION. The MP3/JPEG Navigation screen appears. C Display the item. For MP3 Playback Press w e to move the arrow to “MP3”.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 76 Thursday, May 6, 2004 10:46 AM 76 EN EDITING DV Dubbing TV You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 77 Thursday, May 6, 2004 10:46 AM EN A Make connections. B Prepare the unit for dubbing. 77 ● To clear the “DV DUBBING” controller from the TV screen, press ON SCREEN. Connect a camcorder or DV equipment to the DV IN connector on the unit’s front panel. E Stop dubbing. Press 8 on the remote control. ● Both the unit and the external DV equipment stop dubbing.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 78 Thursday, May 6, 2004 10:46 AM 78 EN EDITING (cont.) You can use a camcorder as the source player and your unit as the recording deck. Edit From A Camcorder Slide the TV/DVD switch to DVD. A Make connections.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Right-No-Heading EN Edit To Or From Another Recorder 79 You can use your unit as the source player or as the recording deck. A Make connections. A When using your unit as the source player: — connect its L-1 IN/OUT connector to the recording deck via output cable adapter. B When using your unit as the recording deck: — connect its L-2 IN connector to the source player via input cable adapter. B Set the input mode of recording deck.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Left+ 80 EN EDITING (cont.) Output/Input Set ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Right-No-Heading EN D Return to the normal screen. Press SET UP. L-2 Select Setting (L-2 SELECT) Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the unit’s L-2 IN connector. NOTE: When you connect the unit using the provided cable adapter, be sure to set “L-2 SELECT” to “VIDEO”. If “L-1 INPUT” is set to other than “VIDEO”, the image may be distorted.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Left+ 82 EN Digital Audio Dubbing ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. EDITING (cont.) You can dub selected audio from a DVD or Audio CD disc to a digital audio device. However, it is not possible to dub copy-protected discs. Example: Dubbing to an MD A Make connections. Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable. B Place a disc and load an MD.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Right0 DR-M10SAG_AX_AA2_01.book Page 83 Thursday, May 6, 2004 10:46 AM EN REMOTE CONTROL 83 On the remote control Remote Control Functions Keep pressing SET UP down during steps A – B. A Change the remote control code. Press the number key “1” for 1, “2” for 2, “3” for 3 or “4” for 4. Remote 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Left+ 84 EN TV Multi-Brand Remote Control Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled. Before performing the following steps: ● Turn off the TV using its remote control. ● Slide the TV/DVD switch to TV. REMOTE CONTROL (cont.) A Set the TV brand code. Keep pressing SET UP down during step A. Enter your TV’s brand code using the number keys, then press ENTER.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Right0 DR-M10SAG_AX_AA2_01.book Page 85 Thursday, May 6, 2004 10:46 AM EN SYSTEM CONNECTIONS 85 Connecting To A Satellite Receiver Connect the satellite receiver to the L-2 IN connector, then connect the L-1 IN/OUT connector to the TV’s connector via cable adapters. Make sure that the unit is turned on to view satellite broadcast with this connection. Outdoor unit NOTES: ● Set “L-2 SELECT” to “VIDEO”. (墌 pg.
Filename [DR-M10AG_AX_AA2_10Editing.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 86 Thursday, May 6, 2004 10:46 AM 86 EN SYSTEM CONNECTIONS (cont.) Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right0 EN SUBSIDIARY SETTINGS 87 Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 88 through 91), then follow the procedure below. Mode Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] DR-M10SAG_AX_AA2_01.book Page 88 Thursday, May 6, 2004 10:46 AM 88 EN Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) AUDIO OUTPUT (The boldface settings in the table below indicate the settings at your purchase.) 8 DIGITAL AUDIO OUT DOLBY DIGITAL/PCM STREAM/PCM PCM ONLY 8 ANALOG AUDIO OUT STEREO DOLBY SURROUND 8 D. RANGE CONTROL NORMAL WIDE RANGE TV MODE Set to the appropriate mode according to the type of the device connected to DIGITAL OUT connector.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] DR-M10SAG_AX_AA2_01.book Page 89 Thursday, May 6, 2004 10:46 AM Masterpage:Right-No-Heading EN 89 RECORDING SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SAVE AS LIBRARY OFF ON 8 XP MODE REC AUDIO DOLBY DIGITAL LINEAR PCM 8 AUDIO REC NICAM 1/MAIN NICAM 2/SUB MONO When this function is set to “ON”, the recording information is automatically stored in the library.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] DR-M10SAG_AX_AA2_01.book Page 90 Thursday, May 6, 2004 10:46 AM 90 EN Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) DISPLAY SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SUPERIMPOSE OFF AUTO You can select the modes of indications superimposed on the TV screen. OFF: To turn off superimposed indications. AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] DR-M10SAG_AX_AA2_01.book Page 91 Thursday, May 6, 2004 10:46 AM Masterpage:Right-No-Heading EN 91 OTHERS (The boldface settings in the table below indicate the settings at your purchase.) 8 AUTO TIMER OFF ON When this function is set to “ON”, the timer is automatically engaged when the unit power is turned off, and automatically disengaged when the unit is powered back on.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left+ 92 EN SUBSIDIARY SETTINGS (cont.) Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the CH +/– buttons without going through any vacant channels. Tuner Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right-No-Heading EN E View the Confirmation screen. “SCAN COMPLETED” is displayed on the TV screen. Press “OK”, then the Confirmation screen appears. The confirmation screen lists the channel position number (PR), station channel number (CH) of all stored broadcast stations. The programme currently received on the selected channel position appears behind the confirmation screen. To view the next page, press rt w e.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left+ 94 EN SUBSIDIARY SETTINGS (cont.) D Select the band. Delete A Channel A Press rt to select “BAND”, then press ENTER. B Press rt to change the band between CH (regular) and CC (cable), then press ENTER. Perform steps A and B of “Manual Channel Set” on page 93 to access the Confirmation screen before continuing. A Select the item. Press rt w e to select the item you want to delete. B Delete a channel. E Enter the channel.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 95 Thursday, May 6, 2004 10:46 AM EN Set Stations You can set the desired station name. Perform steps A and B of “Manual Channel Set” on page 93 to access the Confirmation screen before continuing. A Select the channel to set the station name. Press rt w e to select the channel you want to set the station name, then press ENTER twice. B Select the character for station name.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left+ DR-M10AG_AX_AA2_11Subsidiary.fm Page 96 Monday, May 10, 2004 1:31 PM 96 EN SUBSIDIARY SETTINGS (cont.) A Access the Main Menu screen. Clock Set Press SET UP. B Access the “CLOCK SET” screen. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/DVD switch to DVD. TV DVD STANDBY/ON TV DVD TV TV/ MUTING VIDEO DVD DEF GHI JKL MNO PQRS TUV WXYZ CH A Press rt to select “YEAR”, then press ENTER.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 97 Thursday, May 6, 2004 10:46 AM EN 97 Format a DVD-RAM disc Format A Disc A Access the Main Menu screen. Press SET UP. Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased. It is impossible to restore them.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left+ 98 EN Finalise A Disc Finalising DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players. DVD-RW discs are finalised in the mode that the discs were formatted, enabling playback on compatible DVD players. Titles input in the Library Database DVD Navi are registered as titles in the DVD menu. (墌 pg. 26, 66) ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 99 Thursday, May 6, 2004 10:46 AM EN 99 Scan Mode Set Tray Lock You can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY” (墌 pg. 104). You can lock the disc tray to prohibit the unwanted disc ejection by children. ● Turn on the unit.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 100 Thursday, May 6, 2004 10:46 AM 100 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. GENERAL SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. No power is supplied to the unit. ● The AC power plug is disconnected from the mains.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SAG_AX_AA2_01.book Page 101 Thursday, May 6, 2004 10:46 AM EN 101 RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The desired programme cannot be recorded. ● The channel position does not correspond to that in the receiving area. Set the correct channel position for the receiving broadcast. (墌 pg. 92) 2. Recording and editing cannot be made. ● No disc or a disc not being compatible with the unit is loaded.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left+ DR-M10SAG_AX_AA2_01.book Page 102 Thursday, May 6, 2004 10:46 AM 102 EN TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES MESSAGE DESCRIPTION MEMORY IS FULL NOTHING MORE CAN BE REGISTERED IN THE LIBRARY IF YOU DELETE UNNECESSARY TITLE INFORMATION, YOU CAN THEN REGISTER ADDITIONAL INFORMATION The memory is full for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough. (墌 pg.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] DR-M10SAG_AX_AA2_01.book Page 103 Thursday, May 6, 2004 10:46 AM Masterpage:Right-No-Heading EN MESSAGE 103 DESCRIPTION PRESS [STOP] AGAIN TO STOP RECORDING During Live Memory playback, 8 has been pressed. (墌 pg. 34) TIMER RECORDING COMPLETED Timer recording has finished during Live Memory playback.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 104 Thursday, May 6, 2004 10:46 AM 104 EN GLOSSARY 8 Aspect ratio 8 Multiangle The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function.
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm] Masterpage:Right0 DR-M10AG_AX_AA2_11Subsidiary.fm Page 105 Friday, May 14, 2004 5:00 PM EN SPECIFICATIONS GENERAL Power requirement* DR-M10SAG/SAX : AC 110 V – 240 Vd, 50 Hz/60 Hz DR-M10SAA2 : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption Power on : 33 W Power off : 17.6 W Temperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 70 mm x 350 mm Weight : 4.
Filename [DR-M10AG_AX_AA2_01IX.fm] Masterpage:Left0 DR-M10SAG_AX_AA2_01.book Page 106 Thursday, May 6, 2004 10:46 AM 106 EN LIST OF TERMS A R A-B Repeat Playback ............................................ 39 Adjusting the picture quality .................................. 41 Angle Selection .................................................... 29 Audio Channel Selection ....................................... 30 Audio Language/Sound Selection ........................... 29 AUDIO OUTPUT ..............
Filename [DR-M10AG_AX_AA2_01IX.fm] DR-M10SAG_AX_AA2_01.
Filename [DR-M10AG_AX_AA2_13Cov4.fm] DR-M10AG_AX_AA2_13Cov4.