DVD Video Recorder Instructions

Masterpage:Right-No-Heading
EN 89
Filename [DR-M10AG_AX_AA2_11Subsidiary.fm]
Page 89 April 27, 2004 11:13 am
RECORDING SET
(The boldface settings in the table below indicate the settings at your purchase.)
8 SAVE AS LIBRARY
OFF
ON
When this function is set to “ON”, the recording information is automatically
stored in the library. For details, refer to “Modify Library Information”
(墌 pg. 72).
8 XP MODE REC AUDIO
DOLBY DIGITAL
LINEAR PCM
You can select the audio format when you record a programme in XP mode.
When this function is set to “LINEAR PCM”, you can obtain a high-quality
audio sound.
DOLBY DIGITAL:
To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.
8 AUDIO REC
NICAM 1/MAIN
NICAM 2/SUB
MONO
You can select the desired NICAM audio channel to be recorded on a DVD-R/
RW (Video mode) disc.
NICAM 1/MAIN:
To record the main language of NICAM audio.
NICAM 2/SUB:
To record the sub language of NICAM audio.
MONO:
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8 INPUT COLOUR SYSTEM
PAL
SECAM
You can play back PAL discs, or record PAL and SECAM signals on this unit.
Select the appropriate colour system.
PAL: To record PAL signals.
SECAM: To record SECAM signals.
DR-M10SAG_AX_AA2_01.book Page 89 Thursday, May 6, 2004 10:46 AM