Operation Manual

Masterpage:Right0
EN
27
Filename [DR-M1E_06Name.fm]
Page 27 August 28, 2003 3:02 pm
Setting satellite receiver’s brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
A
Turn on the satellite receiver.
Turn on the satellite receiver’s power.
B
Access the Main Menu screen.
Press
SET UP
.
C
Access the “SAT/GUIDE PR” screen.
D
Select the satellite receiver’s brand.
A
Press
rt
to move the arrow to “SAT BRAND”, then
press
ENTER
.
B
Press
rt
to select the brand code from the list on
page 28, then press
ENTER
.
● If the brand code you entered is invalid, the code field will be
reset. Enter the correct brand code again.
● If the unit is in playback or recording mode, you cannot set the
brand code.
E
Select the satellite receiver’s channel for
testing.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
A
Press
we
to move the
arrow to “INITIAL SET
UP”, then press
ENTER
.
B
Press
we
to move the
arrow to “SAT/GUIDE
PR”, then press
ENTER
.
Press the appropriate
number
keys
to enter one of the
channel positions on the
satellite receiver, then press
ENTER
twice.
● You can select the channel
position between 1 to 999.
● After pressing
ENTER
, the unit
enters the Test mode.
DR-M1E_06Name.fm Page 27 Thursday, August 28, 2003 3:02 PM