User's Manual
27
Recording
EN
Timer recording
You can set the unit to record up to 8 programmes, up
to a month in advance. Daily or weekly programme
recordings are also available.
• Be sure to set the clock before entering a timer
programming.
• You can select the timer programming list by
pressing [PROG] twice. In this case, continue from
step 5.
Insert a recordable disc.
1 In stop mode, press [SET UP].
2 If you select “Advanced Setting
Menu,” proceed to step 3.
If you select “Easy Setting Menu,”
proceed to step 4.
3 Select “Recording” using
[Cursor U / D], then press [ENTER].
4 Select “Timer Programming” using
[Cursor U / D], then press [ENTER].
The Timer Programming list will appear.
5 Select a programme that is not set
using [Cursor U / D], then press
[ENTER].
6 Enter the date using [Cursor U / D],
then press [Cursor P].
Each time you press [Cursor D] at the current
date, the timer recording mode will change as
follows.
e.g., 1st January
7 Enter the time to start and to end
using [Cursor U / D], then press
[Cursor P].
8 Select the channel number to record
using [Cursor U / D], then press
[Cursor P].
To record from external input, select “AV1,” “AV2,”
“AV3” or “AV4”.
9 Select the recording speed using
[Cursor U / D], then press
[Cursor P].
(See page 21.)
10
Press [ENTER] when all information
required is entered.
Your programme setting is stored.
• To set another programme, repeat steps 5 to 10.
• To exit, press [SET UP] or [PROG].
• If the recording times of two or more
programmes overlap, “Overlap” and overlapped
programme numbers are displayed. (See pages
28 and 30.)
11
Press [STANDBY/ON y/I].
The icon will appear on the front panel display
and the unit enters to the timer-standby mode.
Note
• If you have not set the clock, the clock setting
window will appear after step 4. Continue from step
5 in “Clock Setting” on page 19 before programming
the timer.
•Press [Cursor L / P] to move the cursor in the timer
programming menu.
DVD-RWDVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R
Timer Programming
Date Start End CH Speed
Timer Programming
Date Start End CH Speed
1. — — —
2.
- - -
3.
- - -
4.
- - -
5.
- - -
6.
- - -
7.
- - -
8.
- - -
1.
- - -
Daily
M-F
(Mon.-Fri.)
01/01
31/01
W-SAT
W-FRI
W-SUN
Timer ProgrammingTimer Programming
Date Start End CH Speed
1.
13:0001/01 12:00 P01 XP
2.
- - -
3.
- - -
4.
- - -
5.
- - -
6.
- - -
7.
- - -
8.
- - -
E6850ED_EN.book Page 27 Wednesday, August 3, 2005 4:02 PM