Instructions

Filename [DR-MH30US_Sheet_003A.fm]
Page 1 July 9, 2004 3:04 pm
LPT0921-003A
0704MNH-ID-BJ
(DR-MH30/DR-MH20)
NOTES
■ This unit includes a Demonstration Mode image for introducing the product features.
1 Press NAVIGATION on the remote control.
2 Press rt w e to select “ORIGINAL”, then press ENTER.
3 Press rt w e to select the Demonstration Mode index, then press ENTER.
4 Press we to select “BEGINNING”, then press ENTER.
] To erase the Demonstration Mode, 墌 see page 53, “Delete Title”.
■ Built-in HDD
The hard disk drive (HDD) is a device with a precision internal structure for reading subtle magnetic changes. The drive is always
spinning at high speed when the power is on. Although it is capable of extended hours of recording and high-speed searching, it
is a special part that is susceptible to breakage. Therefore, when saving important image, it is recommended that you copy the
image to DVD or other media.
■ When moving the product
Press 1 to turn off the power, and wait at least 30 seconds before unplugging the power cord. Then, wait at least 2 minutes
before moving the product.
■ Turning on the unit takes longer when...:
“LOADING” blinks on the front display panel when the AC plug of the AC power cord is connected into an AC outlet and it takes
approximately 50 seconds for the unit to be turned on. This is not a malfunction.
■ Reading a disc may take longer when...:
It takes approximately 30 seconds to read a disc depending on the type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take several minutes when a disc is dirty, scratched or warped.
DR-MH30US_Sheet_003A.fm Page 1 Friday, July 9, 2004 3:04 PM