Filename [DR-MV1SEK_01Cov1.fm] DR-MV1SEK_01Cov1.
Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 2 Thursday, April 15, 2004 3:30 PM 2 EN Masterpage:Left0 SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 3 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ SAFETY FIRST The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “!” shows ON. When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
Filename [DR-MV1SEK_02Safety.fm] DR-MV1SEK_00.book Page 4 Thursday, April 15, 2004 3:30 PM 4 Masterpage:Left+ SAFETY FIRST EN Some Do’s And Don’ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO DO DO DO read the operating instructions before you attempt to use the equipment.
Filename [DR-MV1SEK_02Safety.fm] Masterpage:Right0 DR-MV1SEK_00.book Page 5 Thursday, April 15, 2004 3:30 PM EN 5 Features of this unit This unit allows you various types of playback and recording because this unit has two tuners. Record programmes on both DVD deck and VCR deck simultaneously 1 Start recording on the DVD deck. (墌 pg. 42) 2 Start recording on the VCR deck. (墌 pg. 54) NOTE: Operate the DVD deck while recording on the VCR deck 1 Start recording on the VCR deck. (墌 pg.
Filename [DR-MV1SEK_02Safety.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 6 Thursday, April 15, 2004 3:30 PM 6 EN CONTENTS DISC INFORMATION 7 About Discs ...................................................................................7 INDEX 12 INSTALLING YOUR NEW UNIT 18 Basic Connection ........................................................................18 INITIAL SETTINGS 19 Auto Set Up .................................................................................
Filename [DR-MV1SEK_03DiscInfo.fm] Masterpage:Right0 DR-MV1SEK_00.book Page 7 Thursday, April 15, 2004 3:30 PM DISC INFORMATION About Discs Recordable/playable Discs You can use discs with the following logos for recording and playback. EN 7 DVD-R/RW Discs It is only possible to use DVD-R discs which conform with DVD-R standard Version 2.0. When a DVD-R/RW disc (Video mode) is finalised (墌 pg. 88), it can be played back on a standard DVD player as a DVD VIDEO disc.
Filename [DR-MV1SEK_03DiscInfo.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 8 Thursday, April 15, 2004 3:30 PM 8 EN DISC INFORMATION Discs For Playback Only Unplayable Discs You can use discs with the following logos for playback only. DVD VIDEO Video CD/Super Video CD The following types of discs cannot be played using this unit.
Filename [DR-MV1SEK_03DiscInfo.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 9 Thursday, April 15, 2004 3:30 PM DISC INFORMATION Recording Medium And Format DVD-RAM ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts. ● While recording, it is possible not only to start playback of a programme currently being recorded, but also to watch another programme previously recorded.
Filename [DR-MV1SEK_03DiscInfo.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 10 Thursday, April 15, 2004 3:30 PM 10 EN DISC INFORMATION DVD VIDEO Marks Placing A Disc Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a function it supports.
Filename [DR-MV1SEK_03DiscInfo.fm] DR-MV1SEK_00.book Page 11 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ DISC INFORMATION Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 12 Thursday, April 15, 2004 3:30 PM 12 EN INDEX Front View A B C D E F G H I J STANDBY/ON VCR/DVD VCR DVD VCR REMAIN DUB DVD SAT PR DV IN F-1 DVD S-VIDEO KL VIDEO REC MODE (MONO) L - AUDIO - R M N A Standby/On Button (1) B VCR/DVD Button 墌 pg. 22 C VCR Timer Lamp (#) 墌 pg. 56 VCR Lamp 墌 pg. 51 VCR Recording Lamp (7) 墌 pg. 54 D Cassette Loading Slot E Open/Close Button (x) 墌 pg. 10 F Stop Button (8) 墌 pg.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 13 Thursday, April 15, 2004 3:30 PM INDEX EN 13 Rear View A B 2 C D E DVD/VCR AUDIO OUT F G DVD L-1 IN/OUT Y LEFT PB RIGHT PR IN OUT COMPONENT VIDEO OUT ANTENNA DIGITAL AUDIO OUT PCM/ STREAM IN/DECODER L-2 COAXIAL OPTICAL SAT CONTROL DVD H I A Region Number Label 墌 pg. 8 B AC Power Cord 墌 pg. 18 C Cooling Fan ● This prevents the temperature from rising inside the unit. Do not remove it.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 14 Thursday, April 15, 2004 3:30 PM 14 EN INDEX Front Display Panel A BC K L D M E N A VPS/PDC Indicator* 墌 pg. 46 – 47 Appears when checking if the station being received transmits a VPS/PDC signal. * VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this unit. Disc Type Indicator When a disc is loaded, the type of the disc is indicated.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 15 Thursday, April 15, 2004 3:30 PM INDEX EN 15 On-Screen Display (DVD deck) When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN twice. A Disc Display Displays the type of the disc loaded on the disc tray. B Title Number* Displays number of the title currently being played back.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Left+ DR-MV1SEK_00.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right+ DR-MV1SEK_00.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 18 Thursday, April 15, 2004 3:30 PM 18 EN INSTALLING YOUR NEW UNIT 1 Place the unit on a stable, horizontal surface. 2 Connect the unit to a TV depending on the TV and cables you Basic Connection use. Aerial connector Back of TV RF cable (provided) TV aerial cable Basic Connection 8 To connect to a TV with AV input connectors — A Disconnect the TV aerial cable from the TV.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right0 DR-MV1SEK_04Name.fm Page 19 Thursday, April 22, 2004 6:32 PM INITIAL SETTINGS NOTES: Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set After the 1 button on the unit or remote control is pressed for the first time to turn on the unit, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically. VCR/DVD After “Auto Set Up” is completed, perform “Monitor Set (DVD Deck Only)” on page 25.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Left+ DR-MV1SEK_04Name.fm Page 20 Friday, April 23, 2004 9:41 AM 20 EN INITIAL SETTINGS Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set ATTENTION: You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 21 Thursday, April 15, 2004 3:30 PM INITIAL SETTINGS Results Of Auto Set Up/Preset Download Appearing On The Front Display Panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed. Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored in the unit’s memory by using the PR +/– button(s). ● If station names (ID – 墌 pg.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 22 Thursday, April 15, 2004 3:30 PM 22 EN INITIAL SETTINGS On-screen Language Set Language ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. This unit offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically (墌 pg. 21), you can change the language setting manually as required.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 23 Thursday, April 15, 2004 3:30 PM INITIAL SETTINGS Satellite Receiver Control Setting (DVD Deck Only) EN 23 The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the VIDEO Plus+ Timer Programming (墌 pg. 45) or Manual Timer programming (墌 pg.
Filename [DR-MV1SEK_04Name.fm] DR-MV1SEK_00.book Page 24 Thursday, April 15, 2004 3:30 PM 24 EN Masterpage:Left+ INITIAL SETTINGS 8 Check the result of the test. If the satellite receiver’s channel number has been changed to the same one as you set in step 7 Press w e to select “YES”, then press ENTER to finish the Sat Control Set mode. If the satellite receiver’s channel number has not been changed correctly Press w e to select “NO”, then press ENTER. Then perform the procedure again from step 5.
Filename [DR-MV1SEK_04Name.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 25 Thursday, April 15, 2004 3:30 PM INITIAL SETTINGS Monitor Set (DVD Deck Only) You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. EN 25 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 26 Thursday, April 15, 2004 3:30 PM 26 OPERATIONS ON DVD DECK EN To play back an MP3/JPEG disc, see “Playback With MP3/JPEG Navigation” (墌 pg. 66). Basic Playback 1 Load a disc. ● For details, refer to “Placing A Disc” (墌 pg. 10). 2 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. 3 Press 4 to start playback. ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 27 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK 27 Locating The Start Point Of The Item Or Skip The Item Playback Features ● ● ● ● Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. EN Press 2 or 6 during playback.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 28 Thursday, April 15, 2004 3:30 PM 28 EN OPERATIONS ON DVD DECK Resume Function SAT 1 2 3 4 5 6 7 8 9 0 DISPLAY TOP MENU MARK MENU rtw e ENTER 6 4 SLOW+ (5) 9 2 SLOW– (3) 8 REMAIN ANGLE SUBTITLE Still Picture/Frame-By-Frame Playback It is possible to memorise the position where you stop playback and resume playback from that position. ● Be sure to set “RESUME” to “ON” or “DISC RESUME”. (墌 pg.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 29 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK EN 29 Marking Positions To Play Back Again Later Angle Selection It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW/R discs when recording is helpful to locate a start point when you play back the discs later.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 30 Thursday, April 15, 2004 3:30 PM 30 OPERATIONS ON DVD DECK EN NOTE: SAT 1 2 3 4 5 6 7 8 9 0–9 0 MENU TOP MENU ENTER rtw e RETURN NEXT (6) 4 SET UP PREVIOUS (2) 8 AUDIO Audio Language/Sound Selection It is not possible for DVD-R/DVD-RW (Video mode) disc playback to switch the audio channel. The audio channel is played back as set in “AUDIO REC” setting. (墌 pg.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 31 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK 31 To Play Back From The Beginning Of The Programme While Recording Live Memory Playback This unit records pictures onto DVD-RAM discs, instead of video tapes, then plays back the pictures recorded on the discs.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 32 Thursday, April 15, 2004 3:30 PM 32 EN OPERATIONS ON DVD DECK Overview Of Live Memory Playback You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. This is called “Live Memory Playback”.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 33 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK EN 33 Display During Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the orange or blue bar on the TV screen.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 34 Thursday, April 15, 2004 3:30 PM 34 EN OPERATIONS ON DVD DECK Buttons To Be Used During Live Memory Playback ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. SAT 1 2 3 4 5 6 7 8 9 0 H9 Pressing once pauses playback (still picture playback). Pressing repeatedly advances the still picture frame by frame.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 35 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Using The On-screen Bar The on-screen bar allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on the On-screen bar. Be sure to clear Library Database DVD Navi screen by pressing NAVIGATION. SAT 1 2 3 4 5 6 7 8 9 G H I J K L 35 Disc type. Select this for Repeat Playback. (墌 pg.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 36 Thursday, April 15, 2004 3:30 PM 36 EN OPERATIONS ON DVD DECK A-B Repeat Playback SAT CANCEL (&) 1 2 3 4 5 6 7 8 9 0–9 0 ON SCREEN ENTER rtw e You can repeat the desired part. During playback 1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select “ ”. 3 Press ENTER at the beginning of the desired part you want to repeat (point A). The elapsed playing time of the point A appears.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 37 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK EN 37 Locating The Beginning Of A Desired Selection Time Search You can locate the beginning of a title, chapter, group or track. You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a title (DVD-RAM, DVDR, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD and Audio CD).
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 38 Thursday, April 15, 2004 3:30 PM 38 EN OPERATIONS ON DVD DECK Adjusting The Picture Quality a SAT 1 2 3 4 5 6 7 8 9 CANCEL (&) ENTER 2 0–9 You can obtain optimal picture quality by selecting an appropriate picture mode. ON SCREEN 1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select “ ”, then press ENTER. The pop-up 0 rtw e window appears under the selected item.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 39 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK Setting The Progressive Mode Programme Playback You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). You can play back up to 30 tracks in the desired order. 1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select “ ”, then press ENTER.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 40 Thursday, April 15, 2004 3:30 PM 40 EN OPERATIONS ON DVD DECK Select The Switching Interval Of The Slide Show a SAT 1 2 3 4 5 6 7 8 9 You can control the switching interval of the slide show. ON SCREEN 1 Press ON SCREEN twice to access the on-screen bar. 2 Press w e to select “ ”, then press ENTER. The pop-up rtw e window appears under the selected item.
Filename [DR-MV1SEK_05DVD Operation1.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 41 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK EN 41 11 Press the number keys to enter the same password as in Parental Lock step 8 above, then press ENTER. 12 Press SET UP twice to complete the setting. NOTE: Remember your password, or make a note of it. This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 42 Thursday, April 15, 2004 3:30 PM 42 OPERATIONS ON DVD DECK EN NOTES: Basic Recording ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ATTENTION: It is not possible to record programmes on a DVD-R disc which has already been finalised. ● It is recommended to format a DVD-RAM disc before use if you use the disc on this unit for the first time.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 43 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK 43 Instant Timer Recording (ITR) Recording Features ● ● ● ● EN This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 44 Thursday, April 15, 2004 3:30 PM 44 EN OPERATIONS ON DVD DECK Free Rate Function NOTES: To record the entire programme, the unit automatically set the appropriate recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 45 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK VIDEO Plus+ Timer Programming ® You can programme this unit to timer-record as many as 8 programmes. With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the PlusCode number.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 46 Thursday, April 15, 2004 3:30 PM 46 EN OPERATIONS ON DVD DECK Manual Timer Programming 10 Press ENTER to access the Programme Confirmation screen. 11 Press ENTER to complete timer programming. ● To programme another timer, repeat steps 3 – 11. 12 Press DVD TIMER (#) to engage the unit’s timer mode. The You can programme this unit to timer-record as many as 8 programmes.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 47 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK On-Disc Timer Programming EN 47 8 Press w e to select “TV PROG”, then press rt to select the desired channel. 9 Set “DAILY/WEEKLY” option. ● Refer to step 6 in “VIDEO Plus+ Timer Programming” (墌 pg. 45). ● It is necessary to set “DAILY/WEEKLY” option for On-Disc Timer Programming. (墌 pg.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 48 Thursday, April 15, 2004 3:30 PM 48 EN OPERATIONS ON DVD DECK How Discs Are Overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode Overwritten 1st Blank 2nd 1st 2nd Overwritten 3rd The first programme is overwritten by the third. 4th 3rd The second programme is overwritten by the forth.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 49 Thursday, April 15, 2004 3:30 PM OPERATIONS ON DVD DECK EN 49 When Programmes Overlap Each Other DVD TIMER (#) VCR/DVD CANCEL (&) PROG/CHECK 1 If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Programme Check screen appears and conflicting programmes will be highlighted in pink.
Filename [DR-MV1SEK_06DVD Operation2.fm] Masterpage:Left+ DR-MV1SEK_06DVD Operation2.fm Page 50 Thursday, April 22, 2004 5:09 PM 50 OPERATIONS ON DVD DECK EN Automatic Satellite Programme Recording (DVD Deck Only) ● Make sure the satellite receiver is connected to the unit’s L-2 IN/ DECODER connector. ● Programme the timer on the satellite receiver. ● Slide the TV/CABLE/SAT/DVD switch to DVD. 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Right0 DR-MV1SEK_00.book Page 51 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK EN 51 1 Load a cassette. Make sure the window side is up, the rear label Basic Playback side is facing you and the arrow on the front of the cassette is pointed toward the unit. ● Do not apply too much pressure when inserting. ● If the record safety tab has been removed, playback begins automatically.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 52 Thursday, April 15, 2004 3:30 PM 52 EN OPERATIONS ON VCR DECK High-Speed Search Playback Features ● ● ● ● During playback, press 5 for forward high-speed search, or 3 for reverse high-speed search. Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 53 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK EN 53 Next Function Memory Soundtrack Selection The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 54 Thursday, April 15, 2004 3:30 PM 54 OPERATIONS ON VCR DECK EN Basic Recording Recording Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. ● ● ● ● 479 Turn on the unit. Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 55 Thursday, April 15, 2004 3:30 PM OPERATIONS ON VCR DECK Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. 1 Press 7 on the unit to start recording. 2 Press 7 again to engage the ITR mode. ● On the front display panel, “0:30” appears.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 56 Thursday, April 15, 2004 3:30 PM 56 EN OPERATIONS ON VCR DECK VIDEO Plus+ Timer Programming ® You can programme this unit to timer-record as many as 8 programmes. With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise. You can use the remote control to enter the PlusCode number.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Right+ DR-MV1SEK_07VCR Operation.fm Page 57 Thursday, April 22, 2004 5:10 PM OPERATIONS ON VCR DECK Manual Timer Programming You can programme this unit to timer-record as many as 8 programmes. If you do not know the PlusCode number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme. ● ● ● ● Make sure that the unit’s built-in clock is set properly. Turn on the unit.
Filename [DR-MV1SEK_07VCR Operation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 58 Thursday, April 15, 2004 3:30 PM 58 EN OPERATIONS ON VCR DECK When Programmes Overlap Each Other VCR TIMER (#) VCR/DVD CANCEL (&) PROG/CHECK SAT 1 2 3 4 5 6 7 8 9 1 If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Right0 DR-MV1SEK_00.book Page 59 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) Library Database DVD Navi The Library Database DVD Navi enables you to search and select the desired programmes recorded on a DVD-RAM/R/RW disc very easily. You can record up to 99 programmes on a disc. Each time a programme is recorded on the disc, the information of the programme is registered for the Library Database DVD Navi automatically.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 60 Thursday, April 15, 2004 3:30 PM 60 EN NAVIGATION (DVD DECK ONLY) Scan For Beginning(s) Of Programme(s) Modify Original Information ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. SAT 1 2 3 4 5 6 7 8 9 0 ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 61 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) EN 61 Modify Programme Name Protect Title 1 Perform steps 1 to 3 of “Modify Index” (墌 pg. 60) before continuing. You can protect the programme to prevent accidental erasure of the important programme. 2 Press rt w e to select “MODIFY”, then press ENTER. 3 Press w e to select “MODIFY NAME”.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 62 Thursday, April 15, 2004 3:30 PM 62 EN NAVIGATION (DVD DECK ONLY) Delete Unwanted Part Of The Programme You can delete unwanted part of the programme. Modify Play List Information 1 Perform steps 1 to 2 of “Modify Index” (墌 pg. 60) before continuing. 2 Press w e to select one programme whose unwanted part you want to delete, then press t. 3 Press w e to select “EDITING”, then press ENTER. 4 Press 4 to start playback.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 63 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) 8 Press w e to select “PREVIEW”, then press ENTER to preview the play list. 9 Press w e to select “EXECUTE”, then press ENTER. The play list is created. To modify the points A Press w e to select “CLEAR”, then press ENTER. B Repeat steps 5 – 9 as necessary. 10 Press NAVIGATION to return to the normal screen.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 64 Thursday, April 15, 2004 3:30 PM 64 EN NAVIGATION (DVD DECK ONLY) Delete Unwanted Part From Play List Delete Play List 1 Perform steps 1 to 3 of “Create Play List” (墌 pg. 62) before 1 Perform steps 1 to 3 of “Create Play List” (墌 pg. 62) before continuing. continuing.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 65 Thursday, April 15, 2004 3:30 PM NAVIGATION (DVD DECK ONLY) Modify Library Information EN 65 Register Disc 1 Load a disc you want to register. 2 Press NAVIGATION. The Library Database DVD Navi screen appears. Programme information can be registered in the unit’s memory for up to 1,300 programmes. It is helpful when finding out on which disc the desired programme is recorded. ● Turn on the TV and select the AV mode.
Filename [DR-MV1SEK_08Navigation.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 66 Thursday, April 15, 2004 3:30 PM 66 EN NAVIGATION (DVD DECK ONLY) Playback With MP3/JPEG Navigation 4 Press w e to select the desired group, then press ENTER. For MP3 Playback ● The tracks in the selected group appear. For JPEG Playback This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Right0 DR-MV1SEK_00.book Page 67 Thursday, April 15, 2004 3:30 PM EDITING Tape Dubbing (From VCR To DVD) 67 1 For DVD deck Load a recordable disc. For VCR deck Load a cassette you want to dub. Dubbing An Entire Cassette Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 68 Thursday, April 15, 2004 3:30 PM 68 EDITING EN Manual Dubbing (From VCR To DVD) 1 For DVD deck Load a recordable disc. For VCR deck Load a cassette you want to dub. Dubbing A Part Of A Cassette You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 69 Thursday, April 15, 2004 3:30 PM EDITING Load a disc you want to dub. For VCR deck Load a cassette with the record safety tab intact. Dubbing An Entire Disc Because this unit includes both DVD deck and VCR deck, you can easily use this unit for dubbing without connecting any other equipment. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 70 Thursday, April 15, 2004 3:30 PM 70 EDITING EN Manual Dubbing (From DVD To VCR) 1 For DVD deck Load a disc you want to dub. For VCR deck Load a cassette with the record safety tab intact. Dubbing A Part Of A Disc You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 71 Thursday, April 15, 2004 3:30 PM EDITING EN 71 1 Connect a camcorder or DV equipment to the DV IN connector DV Dubbing (DVD Deck Only) on the unit’s front panel. You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 72 Thursday, April 15, 2004 3:30 PM 72 EDITING EN Edit From A Camcorder Slide the TV/CABLE/SAT/DVD switch to DVD. You can use a camcorder as the source player and your unit as the recording deck.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 73 Thursday, April 15, 2004 3:30 PM EDITING Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck. NOTE: When using another recorder as the recording deck, refer to its instruction manual.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 74 Thursday, April 15, 2004 3:30 PM 74 EN EDITING COMPONENT: If a connected appliance’s input is compatible with Output/Input Set ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. Y/PB/PR signals, set to “COMPONENT”. You can obtain a highquality Y/PB/PR picture. Switch the TV to the input that you can watch component video pictures.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 75 Thursday, April 15, 2004 3:30 PM EDITING NOTES: ● If you have a satellite receiver or a decoder connected to the L-2 IN/ DECODER connector, be sure to set “L-2 SELECT” back to appropriate mode after editing. ● If you are not connecting a satellite receiver or a decoder to the L-2 IN/DECODER connector, leave “L-2 SELECT” set to “VIDEO”.
Filename [DR-MV1SEK_09Editing.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 76 Thursday, April 15, 2004 3:30 PM 76 EN REMOTE CONTROL Remote Control Functions TV Multi-Brand Remote Control Remote control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals.
Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 77 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ REMOTE CONTROL Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT.
Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 78 Thursday, April 15, 2004 3:30 PM 78 EN Masterpage:Left0 SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector. NOTES: ● Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. (墌 pg. 74) ● You can use the Automatic Satellite Programme Recording function (墌 pg. 50) with this connection.
Filename [DR-MV1SEK_09Editing.fm] DR-MV1SEK_00.book Page 79 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ SYSTEM CONNECTIONS Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 80 Thursday, April 15, 2004 3:30 PM 80 EN SUBSIDIARY SETTINGS * The boldface settings below indicate the settings at your purchase. Mode Set (DVD Deck) AUDIO OUTPUT ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 81 Thursday, April 15, 2004 3:30 PM SUBSIDIARY SETTINGS RECORDING SET 8 SAVE AS LIBRARY — OFF / ON When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Modify Library Information” (墌 pg. 65). 8 XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM When this function is set to “ON”, the TV screen becomes all grey when receiving a channel not in use.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 82 Thursday, April 15, 2004 3:30 PM 82 EN SUBSIDIARY SETTINGS Mode Set (VCR Deck) 8 PICTURE CONTROL — AUTO / EDIT / SOFT / SHARP ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/SAT/DVD switch to DVD. VCR/DVD SAT 1 2 3 4 5 6 7 8 9 NOTES: 0 ENTER SET UP This feature helps you to adjust the playback picture quality according to your preference. Normally select “AUTO”.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 83 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ SUBSIDIARY SETTINGS VIDEO Plus+ System Setup ® IMPORTANT: Normally, Auto Set Up (墌 pg. 19), Preset Download (墌 pg. 20) or Auto Channel Set (墌 pg. 83) sets the Guide Program numbers automatically. You need to set the Guide Program numbers manually only in the following cases.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_10Subsidiary.fm Page 84 Thursday, April 22, 2004 5:13 PM 84 EN SUBSIDIARY SETTINGS 4 View the Confirmation screen. “SCAN COMPLETED” is displayed on the TV screen. Press “OK”. 5 Press SET UP to complete the setting. ● When Auto Channel Set is completed, “PLEASE WAIT” will be displayed for about 90 seconds, since channel data is exchanged between the DVD deck and the VHS deck. No operations will be done during this time.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 85 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ SUBSIDIARY SETTINGS Delete A Channel Set Stations (A) 1 Perform steps 1 and 3 of “Manual Channel Set” (墌 pg. 84) to Set station names that are registered in your unit. access the Confirmation screen before continuing. 2 Press rt w e to select the item you want to delete. 3 Press & to delete a channel.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Left+ DR-MV1SEK_00.book Page 86 Thursday, April 15, 2004 3:30 PM 86 EN SUBSIDIARY SETTINGS NOTES: Clock Set IMPORTANT: If you performed Auto Set Up (墌 pg. 19) or Preset Download (墌 pg. 20), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if — — Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download. OR — you want to change Just Clock setting.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Right+ DR-MV1SEK_00.book Page 87 Thursday, April 15, 2004 3:30 PM SUBSIDIARY SETTINGS Format A Disc (DVD Deck Only) EN 87 Format A DVD-RAM Disc 1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 88 Thursday, April 15, 2004 3:30 PM 88 EN Masterpage:Left+ SUBSIDIARY SETTINGS Finalise A Disc (DVD Deck Only) Finalise A DVD-R/RW Disc 1 Perform steps 2 to 4 of “Format A DVD-RAM Disc” (墌 pg. 87) before continuing. 2 Press rt to select “FINALISE”, then press ENTER. Press w e Finalising DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_10Subsidiary.fm Page 89 Thursday, April 22, 2004 6:38 PM Masterpage:Right+ SUBSIDIARY SETTINGS Scan Mode Set EN 89 Tray Lock (DVD Deck Only) If you connect the unit and TV with Component Video Connection (墌 pg. 18), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY” (墌 pg. 95).
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 90 Thursday, April 15, 2004 3:30 PM 90 EN Masterpage:Left0 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. General No power is supplied to the unit. ● The AC power plug is disconnected from the AC outlet. ]Connect the AC power plug to the AC outlet securely.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 91 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ TROUBLESHOOTING EN 91 Playback (VCR Deck) Recording (VCR Deck) The VCR deck can not be operated. During recording, the tape does not run. The VCR recording lamp lights up on the front display panel. ● The VCR deck is not selected. ]Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit. ● The unit is in the Record Pause mode. Press 4 to resume recording.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 92 Thursday, April 15, 2004 3:30 PM 92 EN TROUBLESHOOTING Timer Recording (DVD Deck) Masterpage:Left+ Timer Recording (VCR Deck) Timer programming cannot be made. Timer programming cannot be made. ● Date and time is not correct. ]Set date and time correctly. (墌 pg. 86) ● The timer is not engaged. ]Press DVD TIMER (#) and confirm that the DVD timer lamp lights up on the unit. ● Timer recording is in progress.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 93 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ TROUBLESHOOTING EN 93 Initialising (DVD Deck Only) On-screen Message (DVD Deck Only) Malfunction occurs on the unit. MEMORY IS FULL NOTHING MORE CAN BE REGISTERED IN THE LIBRARY IF YOU DELETE UNNECESSARY TITLE INFORMATION, YOU CAN THEN REGISTER ADDITIONAL INFORMATION ]Press 1 to turn off the unit, press and hold 1, then press 8 for two seconds or more.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 94 Thursday, April 15, 2004 3:30 PM 94 EN Masterpage:Left+ TROUBLESHOOTING PlusCode NO. ERROR CONFIRM PlusCode NO. THEN RETRY COPY PROHIBITED CAN NOT PLAY ● An invalid PlusCode number has been input. (墌 pg. 45) ● The unit has detected invalid contents at the start or in the middle of playback.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 95 Thursday, April 15, 2004 3:30 PM Masterpage:Right0 GLOSSARY EN 95 8 Aspect ratio 8 Multiangle The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 96 Thursday, April 15, 2004 3:30 PM 96 EN Masterpage:Left0 SPECIFICATIONS GENERAL VIDEO/AUDIO (VCR Deck) Power requirement AC 220 V – 240 Vd, 50/60 Hz Power consumption Power on: 42 W Power off: 23.5 W Temperature Operating: 5°C to 35°C Storage: –20°C to 60°C Operating position Horizontal only Dimensions (WxHxD) 435 mm x 96 mm x 347 mm Weight 6.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Right0 DR-MV1SEK_00.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Left+ DR-MV1SEK_00.
Filename [DR-MV1SEK_10Subsidiary.fm] Masterpage:Right+ DR-MV1SEK_00.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 100 Thursday, April 15, 2004 3:30 PM Masterpage:Left+ 100 EN APPENDIX TV Station And ID List The “ID” abbreviation is what is shown on-screen in lieu of the station name. The “ID” abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station.
Filename [DR-MV1SEK_10Subsidiary.fm] DR-MV1SEK_00.book Page 101 Thursday, April 15, 2004 3:30 PM Masterpage:Right+ APPENDIX EN 101 TV Station Channel Number Guide Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV. BBC1 BBC2 London & South-East Bluebell Hill ......................... 40 46 Crystal Palace..................... 26 33 Dover .................................. 50 56 Heathfield............................
Filename [DR-MV1SEK_11IX.fm] Masterpage:Left0 DR-MV1SEK_00.book Page 102 Thursday, April 15, 2004 3:30 PM 102 EN LIST OF TERMS A P A-B Repeat Playback ...................................................... 36 Accidental erasure prevention ........................................ 54 Adjusting The Picture Quality ......................................... 38 Angle Selection ............................................................... 29 Audio Channel Selection ...........................................
Filename [DR-MV1SEK_11IX.fm] DR-MV1SEK_00.
Filename [DR-MV1SEK_12Cov4.fm] DR-MV1SEK_12Cov4.fm Page 104 Friday, April 23, 2004 10:17 AM EN DR-MV1S/DR-MV1B CA VCR TIMER NUM 1 4 GHI 7 PQRS CANCEL VCR PLUS+ TION VIGA N NA P ME TO SE TU P PREVIO SLOW STOP/ CLE REMAIN REC MODE ANGLE S LIVE CHECK TV/VCR TV/DVD COPYRIGHT© 2004 VICTOR COMPANY OF JAPAN, LTD.