Instructions
Table Of Contents
- CONTENTS
- DISC INFORMATION
- INDEX
- INSTALLING YOUR NEW UNIT
- INITIAL SETTINGS
- OPERATIONS ON DVD DECK
- Basic Playback
- Playback Features
- Locating A Desired Scene Using The DVD Menu
- Locating The Start Point Of The Item Or Skip The Item
- High-Speed Search
- Still Picture/Frame-By-Frame Playback
- Slow Motion
- Skip Search
- Resume Function
- Marking Positions To Play Back Again Later
- Checking The Time Information
- Angle Selection
- Subtitle Selection
- Audio Language/Sound Selection
- Audio Channel Selection
- Playback Control (PBC) Function
- Live Memory Playback
- Recording/playback Status Display
- Overview Of Live Memory Playback
- Display During Live Memory Playback
- Buttons To Be Used During Live Memory Playback
- To Play Back From The Beginning Of The Program While Recording
- To Move Back The Playback Position Slightly While Recording (One Touch Replay function)
- To Watch A Program Previously Recorded While Recording
- Using The On-screen Bar
- How To Access The On-screen Bar
- Basic Operation On The On-screen Bar
- Repeat Playback
- A-B Repeat Playback
- Locating The Beginning Of A Desired Selection
- Time Search
- Simulated Surround Effect
- Adjusting The Picture Quality
- Setting The Progressive Mode
- Program Playback
- Random Playback
- Select The Switching Interval Of The Slide Show
- Parental Lock
- OPERATIONS ON DVD DECK
- OPERATIONS ON VCR DECK
- NAVIGATION (DVD DECK ONLY)
- EDITING
- REMOTE CONTROL
- SYSTEM CONNECTIONS
- SUBSIDIARY SETTINGS
- TROUBLESHOOTING
- GLOSSARY
- SPECIFICATIONS
- APPENDIX
- LIST OF TERMS
- WARRANTY (Only in U.S.A.)
- Memo
Masterpage:Right+
EN 85
Filename [DR-MV1SU_10Subsidiary.fm]
Page 85 March 4, 2004 4:00 pm
TROUBLESHOOTING
● An invalid VCR Plus+ number has been input. (墌 pg. 41)
● To set the timer program using the VCR Plus+ system, the
Guide Channel number must be set in advance. (墌 pg. 77)
● Appears when you tried to input a PlusCode number during
timer recording or instant timer recording.
● A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (墌 pg. 9)
● When an incompatible disc is loaded, 4 has been pressed.
(墌 pg. 9)
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (墌 pg. 11, 78)
● Finalizing is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (墌 pg. 11, 79)
● Cancelling disc finalization is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. (墌 pg. 11,
79)
● During Live Memory playback, 8 has been pressed. (墌 pg. 32)
● Timer recording has finished during Live Memory playback.
● Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
● The unit has detected invalid contents at the start or in the
middle of playback.
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
● Check the connection. (墌 pg. 66)
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
GUIDE PROGRAM IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
CAN NOT SET VCR PLUS TIMER PROGRAMING DURING TIMER
RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR
INSTANT TIMER RECORDING, THEN
ENTER THE PLUSCODE AGAIN
REGION CODE ERROR
CHECK DISC
UNREADABLE DISC
CHECK DISC
COULD NOT FORMAT THE DISC
CHECK THE DISC
COULD NOT FINALIZE THE DISC
CHECK THE DISC
COULD NOT CANCEL DISC FINALIZATION
CHECK THE DISC
PRESS [STOP] AGAIN TO STOP RECORDING
TIMER RECORDING COMPLETED
PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START
COPY PROHIBITED
CAN NOT RECORD
COPY PROHIBITED
CAN NOT PLAY
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND
POWERED ON
DR-MV1SU_10Subsidiary.fm Page 85 Thursday, March 4, 2004 4:01 PM