DVD Video Recorder & Video Cassette Recorder Instructions

ManualsBrandsJVC ManualsDVD VCR ComboDR-MV4SUJ

Masterpage:Right+

EN 41

Filename [MV4S_08Basic TimerDub.fm]

EDITING

Page 41Monday, 9 May 2005 09:38

You can use your unit as the source player or as the recording

deck.

NOTE:

When using another recorder as the recording deck, refer to its

instruction manual.

1 Make connections.

A When recording on DVD deck

1.If another recorder has no S-VIDEO connector, connect the unit’s

[AUDIO/VIDEO INPUT] connectors to the audio/video output

connectors on another recorder.

2.If another recorder has S-VIDEO connector, connect the [AUDIO

INPUT] and [S-VIDEO INPUT] connectors to the audio and S-video

output connectors on another recorder.

● If connecting a unit with an S-VIDEO connector, it is recommended to

use an optional S-Video cable to minimize picture degradation while

editing.

B When recording on VHS deck

1.Connect the unit’s [AUDIO/VIDEO INPUT] connectors to the audio/

video output connectors on another recorder.

2 Press VHS/DVD on the unit repeatedly to select the recording

deck.

3 Press CH +/– to select “L-1” when using this unit as the

recording deck.

For DVD deck

● Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, or

“S-VIDEO” for the S-VIDEO input connector, depending on the

connector being used. (墌 pg. 71)

4 Press REC MODE repeatedly to set the recording mode.

5 Engage the Play mode of the source player.

6 Engage the Record mode of the recording deck.

7 Stop recording on the recording deck, then stop playback on the

source player.

NOTES:

● All necessary cables can be obtained from your dealer.

● When you use this unit as the source player for editing, be sure to set

“SUPERIMPOSE” to “OFF” before starting. (墌 pg. 71)

● It is also possible to use the audio/video input connectors on the front

panel. In that case, select “F-1” in step 3.

Edit From Another Recorder

Player

Your unit

Another recorder

Recorder

TV receiver