Operation Manual
H EN
46
Timer Programming Using
Programme Listing
(The GUIDE Plus+ System)
ABCDEFGHILM
9 Timer programming can be done easily from
the programme listing by simply pressing the
buttons. (One-Button-Record)
9
You can programme a maximum of 16
programmes up to 7 days in advance, including
other programmes, within 1 month.
.
........................................................
.
PREPARATION:
0 Switch TV/DVD on the remote control to DVD.
.
........................................................
.
IMPORTANT:
0 Timer programming on the VHS is not possible.
.
........................................................
.
NOTES:
0 Countries that can receive the programme listing are
Austria, Belgium, France, Germany, the Netherlands,
Spain, Switzerland, Italy, the United Kingdom, and
Luxembourg.
0 Recording settings for One-Button-Record will be as
follows.
• Recording mode: Recording mode currently set
(HDD)
• Recording interval: AOnceB
• Recording deck: The last recording deck (other than
VHS) that has been set.
In addition, the recording date and time, programme
name, etc. will be recorded.
0 If you wish to change the recording settings, edit from
the AScheduleB area screen. See AIf setting the
recording deck, recording mode, etc.B [ P49].
0 Returns to the AGridB area screen when the Action
(BLUE) button is pressed.
A Access the GUIDE Plus+ system.
0 The AGridB area screen will be displayed.
B Select a programme.
0 Go to channels on another page using PAGE+/-,
and change to another date using DAY(+) and
DAY(-).
C Set timer recording.
0 The programme set for timer recording changes
to red.
0 If a programme currently being broadcasted is
selected, recording will start approximately 5
seconds after the timer recording is set.
To continue with other timer programmings, repeat
step B-C.
D Exit programming setup.
0 Press STANDBY/ON to turn off when not
performing other operations.
To programme for watching
Programming can be done to avoid missing
programmes. Recording will not be performed.
A maximum of 8 programmes up to 7 days in advance
can be programmed.
A Select a programme.
B Press the Action (GREEN) button.
0 The programme set for watching changes to orange.
.
........................................................
.
NOTES:
0 If this unit is off, it will not turn on even if the start
time of the programme set for watching is reached.
TV
DVD
PAGE(
+
/
-
)
DAY(
+
)
DAY(
-
)
INFO
STANDBY/ON
A, D
B
Action
(YELLOW)
C
Action
(RED)
Action
(GREEN)
Action
(BLUE)
SELECT
Grid
Search
Record
DR-MX10SE.book Page 46 Monday, November 28, 2005 1:11 PM