DR-MX10SE.
DR-MX10SE.book Page 2 Wednesday, December 14, 2005 3:37 PM Safety Precautions The rating plate and the safety caution are on the side of the unit. IMPORTANT: * Please read the various precautions on this and next pages before installing or operating the unit.
DR-MX10SE.book Page 3 Wednesday, December 14, 2005 3:37 PM ATTENTION: 0 The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on and off. 0 When moving the product, press STANDBY/ON to turn off the power, and wait at least 30 seconds before unplugging the power cord. Then, wait at least 2 minutes before moving the product.
DR-MX10SE.book Page 4 Wednesday, December 14, 2005 3:37 PM Safety Precautions (continued) Some Do’s and Don’ts on the Safe Use of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment.
DR-MX10SE.book Page 5 Wednesday, December 14, 2005 3:37 PM Precautions Copyrights 0 Recordings from TV broadcasts or pre-recorded Backup of Recorded Contents 0 It is advisable to back up discs containing important recordings regularly (every few years). Although digital signals do not deteriorate, failure to play back or record may arise from the effects of aging on the disc depending on its storage environment. 0 Recorded data may be corrupted if an outage occurs while this unit is operating.
DR-MX10SE.book Page 6 Wednesday, December 14, 2005 3:37 PM Check Out These Capabilities Choose a dubbing that matches your purpose 6 ways to dub HDD Y DVD, HDD Y VHS, and DVD Y VHS dubbing are possible with this single unit. [ P71] Dub DV tapes (Equipped with DV input terminal) Connect with a DV camcorder, and you can dub DV tapes to the HDD/DVD on this unit.
DR-MX10SE.book Page 7 Wednesday, December 14, 2005 3:37 PM Doing this and that is a breeze! Getting Started Dub to VHS tapes with ease Dub an entire VHS tape exactly to a DVD disc (One-Touch Expert Dubbing) Dub an entire VHS tape with recordings to a DVD disc simply by pressing the button on the unit. [ P79] Record copy-once programmes on DVD-R Supports DVD-R (VR mode) recording.
DR-MX10SE.book Page 8 Wednesday, December 14, 2005 3:37 PM Common Ways to Use Recommended ways of using this unit! Start off by recording to the HDD Fully recordable Max.
DR-MX10SE.book Page 9 Wednesday, December 14, 2005 3:37 PM How to choose a DVD disc At times like these Usable DVD discs To play on other units DVD-RAM DVD-RW Approx. 100K times Approx. 1000 times DVD-R (Video mode) Recording on DVD-R (Video mode) is recommended. 0 Be sure to finalise after recording. [ P67] To perform high speed dubbing from the HDD HDD DVD To record programmes that are only recordable once Getting Started To record repeatedly DVD-RAM DVD-RW DVD-R Max. approx.
DR-MX10SE.book Page 10 Wednesday, December 14, 2005 3:37 PM Contents Getting Started 2 Safety Precautions.......................................................... 2 DR-MX10SEK VHS & HDD & DVD VIDEO RECORDER Precautions during Operation ............................................ 3 Some Do’s and Don’ts on the Safe Use of Equipment ........ 4 Precautions..................................................................... 5 Copyrights ..................................................................
DR-MX10SE.book Page 11 Wednesday, December 14, 2005 3:37 PM Timer Programming Using VIDEO Plus+ Number in the Programme Listing ..............................................47 Useful Functions of the Programme Listing.......................47 Manual Timer Programming (The GUIDE Plus+ System) ................................ 48 Searching Programmes for Timer Programming (The GUIDE Plus+ System) ................................ 50 VIDEO Plus+ Timer Programming ................................
DR-MX10SE.book Page 12 Wednesday, December 14, 2005 3:37 PM About Discs Recordable/Playable Discs Recording mode Disc type Formatting Repeated recording Live Memory Playback Editing 3 3 3 3 3 Finalising HDD Built-in DVD-RAM DVD-RW DVD-R 12 cm: 4.7 GB/9.4 GB (*1) 8 cm: 1.4 GB/2.8 GB (*1) Ver. 2.0 Ver. 2.1 Ver. 2.1/3x VR mode 3 3 12 cm: 4.7 GB 8 cm: 1.4 GB Ver. 1.1 Ver. 1.1/2x Ver. 1.2/4x VR mode 3 3 Video mode 3 3 12 cm: 4.7 GB 8 cm: 1.4 GB General Ver. 2.0 Ver. 2.0/4x/8x Ver. 2.
DR-MX10SE.book Page 13 Wednesday, December 14, 2005 3:37 PM Cartridge-enclosed DVD-RAM 0 0 0 0 0 0 0 0 Cartridge-enclosed DVD-RAM is not supported. DVD-RAM (2.6 GB/5.2 GB) DVD-R DL (single-sided double-layered) +R DL (single-sided double-layered) DVD-R for Authoring CD-ROM/R/RW (including PhotoCD, CD-G) DDCD (1.
DR-MX10SE.book Page 14 Wednesday, December 14, 2005 3:37 PM About VHS Tapes To View a Clear Picture (Cleaning Tape) VHS Tapes Causes of the heads getting dirty 0 When recording on pre-recorded tapes, previous 0 High temperature or 0 Dust in the air humidity (rainy season, etc.) 0 Use D and m tapes. However, S-VHS recordings are not possible. recordings will be erased. 0 VHS tapes cannot be used upside down. 0 Do not open the VHS tape’s cover, dismantle it, or touch the tape inside.
DR-MX10SE.book Page 15 Wednesday, December 14, 2005 3:37 PM How to Use this Manual Operation of the Menu Screen ABCDEFGHILM 0 The menu screen will be displayed when any of the 0 Applicable media are highlighted on the above icons. following buttons is pressed. SET UP, GUIDE, NAVIGATION, EDIT, PROG, DUBBING, HELP 0 Select options using the Selection Keys (FGDE) on TV DVD 0 SELECT HELP Getting Started the remote control. Option A light green item with a small arrow, on the menu screen.
DR-MX10SE.book Page 16 Wednesday, December 14, 2005 3:37 PM Functions of Each Part Front View Press lightly in the middle of the cover, then pull and open.
DR-MX10SE.
DR-MX10SE.book Page 18 Wednesday, December 14, 2005 3:37 PM Selecting Devices to Connect 9 Connection methods vary with the devices used. Refer also to the manuals of the devices to be connected. 9 Turn off the devices before connecting. Install if using the GUIDE Plus+ system via external receiver. Placing the IR Blaster (G-LINK) Antenna External receiver Cable, satellite broadcast External receiver Do not place obstructions between the IR blaster (G-LINK) and the external receiver’s infrared receptor.
DR-MX10SE.
DR-MX10SE.
DR-MX10SE.
DR-MX10SE.
DR-MX10SE.book Page 23 Wednesday, December 14, 2005 3:37 PM Setup Procedures 9 In order to use this unit correctly, set each item in the following steps. When connecting an antenna and TV, Turn on the TV. Preparations A B C Switch the TV to the input (EXT-1, EXT-2, etc.) connected with this unit. Insert the unit’s power plug into the socket. 0 APLEASEB and AWAITB blink alternately on the front display panel as the unit starts up. (Takes around 40 seconds.
DR-MX10SE.book Page 24 Wednesday, December 14, 2005 3:37 PM A Auto Setup Turn on the unit. 9 Auto setup is a function to easily set this unit’s receiving channel, clock and guide programme number by selecting the region. STANDBY/ON S-VIDEO VIDEO (MONO)L−AUDIO−R PR REC STANDBY/ON PREPARATION: 0 To turn on using the unit, press STANDBY/ON. 0 The area selection screen will be displayed .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 25 Wednesday, December 14, 2005 3:37 PM If auto setup was successful If auto setup was unsuccessful The clock display on the front display panel will be A- - : - -B. The channel may also not be displayed. 0 If VIDEO Plus+ timer programming is performed, the 0 Check the antenna cable connection, switch off the guide programme number can be verified. See AVIDEO Plus+ Timer ProgrammingB [ P52]. IMPORTANT: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DR-MX10SE.book Page 26 Wednesday, December 14, 2005 3:37 PM Perform step A-B [ Preset Download 9 If using a TV that provides the T-V Link function, channel settings can be downloaded from the TV by connecting with a SCART cable. C P24] of AAuto SetupB. Select “T-V LINK”. SELECT T-V LINK PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . CONFIRM 0 Switch TV/DVD on the remote control to DVD.
DR-MX10SE.book Page 27 Wednesday, December 14, 2005 3:37 PM A Setting On-screen Language 9 Set the language for menu display on the screen. 0 Switch TV/DVD on the remote control to DVD. Select “FUNCTION SET UP”. Select “DISPLAY SET”. SELECT FUNCTION SET UP DISPLAY SET TV Preparations PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . B C Access the setup menu. DVD D Select “ON SCREEN LANGUAGE”.
DR-MX10SE.book Page 28 Wednesday, December 14, 2005 3:37 PM Setting TV Screen Size A Access the setup menu. 9 Set in accordance with the monitor type of the connected TV and others. B C Select “FUNCTION SET UP”. Select “VIDEO IN/OUT”. FUNCTION SET UP SELECT VIDEO IN/OUT D B-E Select “MONITOR TYPE”. SELECT MONITOR TYPE 4:3LB CONFIRM A, F E Select the monitor type of your TV.
DR-MX10SE.book Page 29 Wednesday, December 14, 2005 3:37 PM A Input/Output Setting 9 The SCART connector supports the connection of composite video signals. Settings must correspond with the type of video signal to use and the device to connect. Select “FUNCTION SET UP”. Preparations B C Access the setup menu. Select “VIDEO IN/OUT”. FUNCTION SET UP SELECT VIDEO IN/OUT B-D D Set the input/output terminal. A Select and confirm on AF-1 INPUTB.
DR-MX10SE.book Page 30 Wednesday, December 14, 2005 3:37 PM The GUIDE Plus+ System Setup 9 Before using the GUIDE Plus+ system, you need to perform initial setup to enable receiving of the host channel carrying the programme data. Take note of the setting especially if you are using an external receiver. For more information on setting up the GUIDE Plus+ system, please visit www.europe.guideplus.com. A Access the GUIDE Plus+ system. 0 AGridB of the Menu Bar is selected. B Select “Setup”.
DR-MX10SE.book Page 31 Wednesday, December 14, 2005 3:37 PM If not using an external receiver Set up a second or third external receiver if necessary. E F Exit setup. Proceed to step F. Exit setup. Proceed to step G. Preparations If using an external receiver E Download programme data before using the GUIDE Plus+ system. Set up the external receiver. A Select AExternal Receiver 1B. F / G Turn off this unit.
DR-MX10SE.book Page 32 Wednesday, December 14, 2005 3:37 PM The GUIDE Plus+ System Operation of Remote Control Buttons GUIDE To access the GUIDE Plus+ system. Selection Keys To navigate the GUIDE Plus+ system. ENTER To confirm an option or to exit the GUIDE Plus+ system and tune directly to a currently running programme. Action The Red, Green, Yellow and Blue buttons perform operations corresponding to the AAction BarB. INFO To expand the Information Box for viewing a long synopsis.
DR-MX10SE.book Page 33 Wednesday, December 14, 2005 3:37 PM Editor Area Select the area on the Menu Bar. Grid 0 The screen initially displayed when GUIDE is pressed. (This is the AHomeB area.) 0 Offers information about the programmes. 0 You can select a programme to timer record and remind (watch). Search 0 You can perform a search narrowed down to category, or search by keyword to look for programmes. 0 You can select a programme to timer record and remind (watch).
DR-MX10SE.book Page 34 Wednesday, December 14, 2005 3:37 PM Clock Setting 9 Usually performed automatically using auto setup or preset download. If cannot be set automatically in some regions, set them manually. A Access the setup menu. B Select “INITIAL SET UP”. SELECT INITIAL SET UP CLOCK SET C Select “CLOCK SET”. SELECT B-G D Select and confirm on “YEAR”. SELECT YEAR 2005 A, H CONFIRM E Select and confirm on “DATE”. SELECT NOTES: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . .
DR-MX10SE.book Page 35 Wednesday, December 14, 2005 3:37 PM A VIDEO Plus+ Guide Channel Set B C D Select “INITIAL SET UP”. Select “TUNER SET”. Preparations 9 Usually performed automatically using auto setup. Set if channel settings are performed manually, or if the receiving channel differs from the channel set using VIDEO Plus+ timer programming. Access the setup menu. Select “GUIDE PROG SET”. SELECT GUIDE PROG SET 11 12 13 CONFIRM 0 The AGUIDE PROG SETB screen will be displayed.
DR-MX10SE.book Page 36 Wednesday, December 14, 2005 3:37 PM E Setting Receiving Channels Select “EDIT”. SELECT 9 Usually performed automatically using auto setup or preset download. If cannot be set automatically in some regions, set them manually. CONFIRM EDIT F G Select a channel that you want to set. 0 A confirmation screen will be displayed. Set the channel. A Select and confirm on ABANDB.
DR-MX10SE.book Page 37 Wednesday, December 14, 2005 3:37 PM Deleting a channel Entering the Station ID Operate up to step E. F A Select and confirm on AIDB on the confirmation screen. Select a channel that you want to delete. 0 The entry screen for Station ID will be displayed. SELECT 01 ------------- CONFIRM G desired ID name. SELECT ----- Delete. 0 If the channel is deleted, subsequent channels will move forward one by one.
DR-MX10SE.book Page 38 Wednesday, December 14, 2005 3:37 PM A Basic Recording (HDD/DVD) Select the recording deck. VHS − OR ABCDEFGHILM 9 TV programmes can be recorded to the HDD or a DVD disc with ease. 9 You can record up to 500 programmes on the HDD, and 99 programmes on one DVD disc. Simultaneous recording on HDD/DVD and VHS cannot be done. HDD − DVD − Recording deck’s LED lights up 0 When HDD is selected, proceed to step B. When DVD is selected A Press OPEN/CLOSE on the unit. PREPARATION: ..
DR-MX10SE.book Page 39 Wednesday, December 14, 2005 3:37 PM B Select the recording mode. Possible operations during recording To pause 0 Usually select SP (standard) mode. 0 The recording mode changes each time REC Recording mode DVD WHILE HOLDING 0 The pause function for HDD is possible only during external input (L-1/L-2/F-1/dv) recording.
DR-MX10SE.book Page 40 Wednesday, December 14, 2005 3:37 PM A Basic Recording (VHS) Select the recording deck. ABCDEFGHILM VHS − 9 TV programmes can be recorded to a VHS tape with ease. 9 Simultaneous recording on HDD/DVD and VHS cannot be done. NOTE: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 0 Switch TV/DVD on the remote control to DVD. HDD − DVD − VHS lamp lights up B Load a recordable tape.
DR-MX10SE.book Page 41 Wednesday, December 14, 2005 3:37 PM E Start recording. Possible operations during recording To pause WHILE HOLDING F To resume recording End recording. To specify recording stop time (Instant Timer Recording) Basic Operations 0 When operating from the unit, press REC. Unit’s record button EO VD VIDEO (MONO)L−AUDIO−R PR REC F-1 0 The recording time from the current time can be set. 0 The record mark on the front display panel blinks.
DR-MX10SE.book Page 42 Wednesday, December 14, 2005 3:37 PM Basic Playback (Library Database Navigation) A ABCDEFGHILM Select the playback deck. OR 9 Play back recorded programmes using Library Database Navigation. Library Database Navigation cannot be used for finalised DVD-RW/-R (Video mode) discs. Press TOP MENU or MENU to play back. VHS − HDD − DVD − Playback deck’s LED lights up 0 When HDD is selected, proceed to step B. When DVD is selected A Press OPEN/CLOSE on the unit. PREPARATION: .. .
DR-MX10SE.book Page 43 Wednesday, December 14, 2005 3:37 PM D Select the programme that you wish to watch from the thumbnails. Animated thumbnail Information on the selected programme SELECT To watch programmes in the desired order (Programme Playback) A Press MEMO/MARK in step D. 0 The number of the playback order will be displayed on the thumbnail. 0 To cancel the memory, press MEMO/MARK 0 Up to 8 programmes can be selected. 0 To clear the order, press CANCEL. Thumbnail B Press ENTER to play back.
DR-MX10SE.book Page 44 Wednesday, December 14, 2005 3:37 PM Usable Buttons during Playback (HDD/DVD) The following buttons can be used during playback. Playback 0 Starts playback. Stop 0 Stops playback and displays the broadcast screen. 0 Memorises the point where playback stops. (Setup Menu ARESUMEB [ P110] H) Pause 0 Pauses playback and displays a still image. Reverse Search/ Forward Search 0 Functions during playback.
DR-MX10SE.book Page 45 Wednesday, December 14, 2005 3:37 PM Timer Programming Guide What kind of programming methods are there? Basic Operations C JV 6 Ways to Programme From the AGridB area [ P46] Search programmes by channel and time using the screen’s programme listing to set recording (programming). From the AScheduleB area AVIDEO Plus+B [ P47] Set recording (programming) by simply entering the PlusCode number.
DR-MX10SE.book Page 46 Wednesday, December 14, 2005 3:37 PM Timer Programming Using Programme Listing (The GUIDE Plus+ System) ABCDEFGHILM A Access the GUIDE Plus+ system. 0 The AGridB area screen will be displayed. B Select a programme. SELECT 9 Timer programming can be done easily from the programme listing by simply pressing the buttons. (One-Button-Record) 9 You can programme a maximum of 16 programmes up to 7 days in advance, including other programmes, within 1 month.
DR-MX10SE.book Page 47 Wednesday, December 14, 2005 3:37 PM Timer Programming Using VIDEO Plus+ Number in the Programme Listing Timer programming can be set simply by entering the number. To unlock the Video Window When searching for programmes using the Grid screen, the Video Window will change its display accordingly if you move to another channel. A Move to the channel logo at the left end of Grid. B Press the Action (RED) button.
DR-MX10SE.book Page 48 Wednesday, December 14, 2005 3:37 PM Manual Timer Programming (The GUIDE Plus+ System) B Select “Schedule”. SELECT Schedule ABCDEFGHILM 9 Timer programming can be done by specifying the date, time and channel as manual programming settings on the GUIDE Plus+ system screen. 9 You can programme a maximum of 16 programmes up to 7 days in advance, including other programmes, within 1 month. C Select “Manual”. Manual PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . .
DR-MX10SE.book Page 49 Wednesday, December 14, 2005 3:37 PM F Select and confirm on ASaveB. 3. Press ENTER to confirm. FR60 - FR360 can be set by 5-minute intervals, then follow by FR420 and FR480. SELECT J Set the recording interval. Save CONFIRM each time the button is pressed. See AWeekly/Daily Timer ProgrammingB [ P94]. 0 The AScheduleB area screen is displayed, with the new timer programme added. 0 If you do not wish to save, select ADon’t saveB, K Set the timing for the end of recording.
DR-MX10SE.book Page 50 Wednesday, December 14, 2005 3:37 PM Searching Programmes for Timer Programming (The GUIDE Plus+ System) C Move to the category field. SELECT Movies ABCDEFGHILM 9 Programmes can be searched by category. In addition, programmes related to the keywords entered can be searched. PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . D 0 Load a recordable disc when recording to a DVD disc.
DR-MX10SE.book Page 51 Wednesday, December 14, 2005 3:37 PM To Search by Keyword Using the AMy TVB Area You can search for a desired programme by specifying the words that appear in the title. Your favourite channels, categories and keywords can be compiled and memorised as a profile. Your desired programmes can be searched anytime by using this profile. A Select AMy ChoiceB from the ASearchB area screen. A Select AMy TVB from Menu Bar. Basic Operations SELECT B Add AProfileB.
DR-MX10SE.book Page 52 Wednesday, December 14, 2005 3:37 PM A VIDEO Plus+ Timer Programming Display the programme navigation screen. ABCDEFGHILM 9 With VIDEO Plus+ system, timer programming can be set simply by entering the number corresponding to the TV programme. 9 You can programme up to 16 programmes, including other programmes, within 1 month. PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 53 Wednesday, December 14, 2005 3:37 PM D If necessary, set recording options for timer programming. A Select AINPUT TITLEB to enter the title name. 0 See ACreating Programme TitleB [ 0 The title can be set later. P82]. 0 See AModify CategoryB [ P81]. 0 The category can be set later. C Select and confirm on AVPS/PDCB. 0 See AVPS/PDC RecordingB [ P55]. 0 See AWeekly/Daily Timer ProgrammingB P94]. E Select AREC MODEB to set the recording mode.
DR-MX10SE.book Page 54 Wednesday, December 14, 2005 3:37 PM A Calendar Timer Programming Display the programme navigation screen. ABCDEFGHILM 9 You can set timer programme by specifying the date and time. 9 You can programme up to 16 programmes, including other programmes, within 1 year. B Select “CALENDAR PR.”. SELECT CALENDAR PR. PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 55 Wednesday, December 14, 2005 3:37 PM B Select ACATEGORYB to set the category. 0 See AModifying Thumbnail/CategoryB [ P80]. 0 The category can be set later. C Select and confirm on AVPS/PDCB. 0 See AWeekly/Daily Timer ProgrammingB [ P94]. E Select AREC MODEB to set the recording mode. 0 See ARecording ModeB [ F To verify the reception of VPS/PDC signals AVPS/PDCB is displayed on the front display panel when VPS/PDC signals are received. IMPORTANT: .. . . . . . . .. . . . .
DR-MX10SE.book Page 56 Wednesday, December 14, 2005 3:37 PM Changing or Cancelling a Timer Programme (The GUIDE Plus+ System) If changing D Change. ABCDEFGHILM 9 Changing or cancelling a timer programme can be done on the AScheduleB area screen. E Change the recording date. SELECT A D Action (RED) 05 - Jun B, C E-K 0 Can also be entered using the Number Keys. D F Change the recording start time. Action (GREEN) G Change the recording end time. H A Access the GUIDE Plus+ system.
DR-MX10SE.book Page 57 Wednesday, December 14, 2005 3:37 PM Checking, Changing or Cancelling a Timer Programme If ACALENDAR LISTB is selected A Select the programmed date. B Select a programme. SELECT ABCDEFGHILM Basic Operations 9 Timer programmes can be changed or cancelled. CONFIRM When cancelling the timer programme A D B-D D Select “CANCEL”.
DR-MX10SE.book Page 58 Wednesday, December 14, 2005 3:37 PM Playing VHS Tapes A Select the playback deck. B Load a tape. C Start playback. ABCDEFGHILM 9 Play back programmes recorded on a VHS tape. Tapes recorded in S-VHS format can also be played. However, it will not be of the original S-VHS high image quality. (ASQPB (S-VHS Quasi Playback) functionB [ P14]) A Possible operations during playback C 0 Resumes normal playback Playback 0 Stop 0 Pause 0 NOTES: .. . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 59 Wednesday, December 14, 2005 3:37 PM Forward/reverse searching While stopped Forward search. Index search For VHS tapes, index signals (VISS signals) are marked at the beginning of each recording. Index searching of programmes can be done using those signals. Up to 9 indexes can be specified in either direction. It is convenient when you know the index at which the programme you wish to watch is recorded. Basic Operations Reverse search.
DR-MX10SE.book Page 60 Wednesday, December 14, 2005 3:37 PM Watching While Recording ABCDEFGHILM 9 While the HDD or DVD-RAM is recording a programme, you can watch a recorded portion of a programme even before recording ends. (Live Memory Playback) 9 During recording, you can watch another programme that has been recorded.
DR-MX10SE.book Page 61 Wednesday, December 14, 2005 3:37 PM D Select “BEGINNING”. Live Memory Playback can also be performed in the following ways SELECT BEGINNING CONFIRM DVD)B [ P44]. To stop Live Memory Playback 0 Exits Live Memory Playback, and the image currently Basic Operations 0 See AUsable Buttons during Playback (HDD/ With HDD/DVD-RAM 0 Press w. Skips back for approximately 7 seconds and resumes playback.
DR-MX10SE.book Page 62 Wednesday, December 14, 2005 3:37 PM Watching DVD Videos Watching DVD Videos ABCDEFGHILM A Select DVD, and load a disc. B Start playback. 9 Commercially available DVD Videos can be played back. 9 Setting the audio, subtitle language and angle (camera) during playback. PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 0 Switch TV/DVD on the remote control to DVD.
DR-MX10SE.book Page 63 Wednesday, December 14, 2005 3:37 PM Audio, Subtitle and Angle Selection Playing back Video CDs that supports PBC (Playback Control) function. Selecting the audio language (DVD Video, Video CD) 0 For Video CDs, the audio will be switched. During playback Watching Video CDs (PBC Function) SELECT PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . Basic Operations 0 Switch TV/DVD on the remote control to DVD.
DR-MX10SE.book Page 64 Wednesday, December 14, 2005 3:37 PM Progressive Scan Output B Press PROGRESSIVE SCAN for more than 3 seconds. ABCDEFGHILM 9 By outputting progressive scan signals, DVD Videos and more can be viewed with high image quality. 9 Progressive scan images can be viewed on the VHS via the [COMPONENT VIDEO OUT] terminal. 0 When progressive scan output is active, the q mark will light up on the front display panel.
DR-MX10SE.book Page 65 Wednesday, December 14, 2005 3:37 PM Playing Back MP3 & JPEG Files A ABCDEFGHILM PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 0 Check the playable file formats. AAbout DiscsB [ B P12] Start playback. A Display the Library Database Navigation screen. 0 If a disc contains both MP3 and JPEG files, specify the file for playback using the following setting.
DR-MX10SE.book Page 66 Wednesday, December 14, 2005 3:37 PM C Formatting Select AEXECUTEB. ABCDEFGHILM 9 Formatting will erase all the data. As such, before formatting a recorded disc, make sure the disc does not contain important recordings. 9 Brand new DVD-RAM or DVD-RW discs may also need to be formatted. 9 To use a DVD-R disc in VR mode, format the new disc in VR mode. (It will be in Video mode when not formatted.) For DVD-RAM For DVD-RW Select AVR MODEB or AVIDEO MODEB.
DR-MX10SE.book Page 67 Wednesday, December 14, 2005 3:37 PM Watching on Other DVD Players (Finalising) C Choose a background image for the menu. (Video mode only) SELECT ABCDEFGHILM 9 To play back DVD-R and DVD-RW discs on other DVD players, perform finalisation. Finalising a Video mode disc results in a DVD VIDEO disc with programme menu. Recording and editing are not possible after finalising. 0 There are 18 types of background images. 0 This step does not apply to DVD-RW/-R (VR mode) discs.
DR-MX10SE.book Page 68 Wednesday, December 14, 2005 3:37 PM Dubbing 9 Two-way dubbing between HDD, DVD and VHS tape is possible with this single unit. Or simply use the ONE-TOUCH EXPERT DUB button on this unit to dub an entire VHS tape exactly to a DVD disc. Dubbing can be done from an external DV camcorder to the HDD or DVD. Refer to the following content for reference during dubbing.
DR-MX10SE.book Page 69 Wednesday, December 14, 2005 3:37 PM Recordable Once Only Programmes (Copy-once) External receiver Recording Icon displayed on thumbnail of programme listing Dubbing 9 Among digital broadcasts, there are programmes whose recording with digital devices is permitted only once for the purpose of copyright protection. To record such programmes to a DVD disc, use a CPRM-compliant disc.
DR-MX10SE.book Page 70 Wednesday, December 14, 2005 3:37 PM Types of Dubbing 3-Way Dubbing from HDD to DVD High Speed Dubbing [ HDD DVD P72] High speed dubbing in a flash! Be no longer annoyed with the waiting time for dubbing. 0 For example, dubbing a 2-hour programme to a DVD-R disc at 64x speed. * In FR480 mode, and when using a 8x high speed compatible DVD-R disc. Dubbing time Approx. 2 mins.
DR-MX10SE.book Page 71 Wednesday, December 14, 2005 3:37 PM Various Other Dubbing Methods P72] Able to copy programmes (titles) from the DVD disc with ease. *&& &8& Dubbing from DVD, HDD to VHS [ P76] Able to copy programmes from the HDD or DVD disc. Dubbing Dubbing from DVD to HDD [ *&& &8& 8*5 Dubbing from VHS to HDD, DVD [ P77] Just Dubbing from VHS to DVD [ P79] You can dub an entire VHS tape or a programme from it to the HDD or DVD disc.
DR-MX10SE.book Page 72 Wednesday, December 14, 2005 3:37 PM Dubbing between HDD and DVD Deck A disc. 0 When dubbing to the HDD, load a disc for ABCDEFGHILM 9 You can easily dub from the HDD to DVD disc, and vice versa. 9 There are 3 ways to dub from the HDD to the DVD disc, so you can choose whichever matches your purpose. Load a disc. 0 When dubbing to a DVD disc, load a recordable playback. B Display the Dubbing screen. PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .
DR-MX10SE.book Page 73 Wednesday, December 14, 2005 3:37 PM 0 Programme list screen is displayed in order of recording date and time. Displays in order of name if the dubbing source is HDD. 0 Pages can be advanced using TOP MENU or MENU. F Select “EXECUTE”. SELECT B Enter into memory. CONFIRM maximum of 8 programmes can be selected. Programmes recorded in DV mode cannot be selected in combination with programmes in other recording modes.
DR-MX10SE.book Page 74 Wednesday, December 14, 2005 3:37 PM Dubbing from DV Camcorder/Video Cassette Recorder Dubbing from DV Camcorder A ABCDEFGHILM 9 Dubbing can be done from a DV camcorder that is connected to this unit with a DV cable. You can also operate the DV camcorder from this unit’s remote control. (On-screen display for DV dubbing) 9 Dubbing images from an external video cassette recorder to a DVD disc, the HDD or a VHS tape. Insert a tape to play on the DV camcorder.
DR-MX10SE.book Page 75 Wednesday, December 14, 2005 3:37 PM If switching the DV sound C Select ASound monitor switchB ( ), and press ENTER to switch. Dubbing from Video Cassette Recorder (VCR) 0 See the following page for the connection. ADubbing SELECT R-DV D 3500 00 : 00. 00 dv SOUND1 SOUND1BSOUND2BMIX 0 SOUND1: Record with normal (original) stereo sound. 0 SOUND2: Record post-recorded sound in stereo. 0 MIX: Record both normal stereo sound and A B C post-recording sound.
DR-MX10SE.book Page 76 Wednesday, December 14, 2005 3:37 PM Dubbing from HDD or DVD to VHS C Set and confirm the recording. A Select ASELECT REC. MODEB to set the mode. ABCDEFGHILM B Select ASELECT SND. MODEB to set the playback sound. 9 Dubbing can be done from the HDD or a DVD disc to a VHS tape. C Select ACONFIRMB. SELECT CONFIRM CONFIRM D CANCEL B, C, E STOP Pause the recording. WHILE HOLDING D 0 Locate the recording start point with O/N, then pause the recording. E Select “EXECUTE”.
DR-MX10SE.book Page 77 Wednesday, December 14, 2005 3:37 PM Dubbing from VHS to HDD or DVD (Entire) A ABCDEFGHILM B Load the tape to play. 0 When dubbing to a DVD disc, load a recordable disc. SELECT Dubbing 9 Programmes recorded on a VHS tape can be dubbed in entirety to the HDD or DVD disc. Select “VHS N HDD” or “VHS N DVD” in step B of “Dubbing between HDD and DVD Deck”, then select “ENTIRE”. [ P72] ENTIRE CONFIRM CANCEL B-D C Set and confirm the recording.
DR-MX10SE.book Page 78 Wednesday, December 14, 2005 3:37 PM Dubbing from VHS to HDD or DVD (1 Programme) ABCDEFGHILM C Set the recording mode. A Select the recording mode. SELECT 9 Dubbing only one of the programmes recorded on a VHS tape to the HDD or a DVD disc is possible. SP CONFIRM CONFIRM B Select ACONFIRMB. SELECT CANCEL CONFIRM 0 See ARecording ModeB [ B, C, E STOP D P92] Pause playback at the scene that you wish to dub.
DR-MX10SE.book Page 79 Wednesday, December 14, 2005 3:37 PM Just Dubbing from VHS to DVD A Load the tape for playback, and a recordable disc. ABCDEFGHILM ᣧㅍࠅ ᣧᚯߒ ౣ ↢ 8*5 *&& &8& &8ജ ᱛ ৻ᤨᱛ ಾ ឵ 8*5 ࠲ࠗࡑ ࠼ ㍳↹ࡕ ㍳ ↹ ً ␜ಾ឵ VHS B DVD Dubbing 9 Just Dubbing from a VHS tape to a DVD disc can be easily done with one touch. The recording time on the VHS tape is automatically calculated, and the recording mode is automatically adjusted to fit the DVD disc’s disc remaining capacity exactly.
DR-MX10SE.book Page 80 Wednesday, December 14, 2005 3:37 PM Modifying Thumbnail/ Category B Display the Editing screen. When DVD is selected A Load a disc. ABCDEFGHILM B Display the Editing screen, then select AMODIFYB. 9 Thumbnail: The picture on the programme list can be changed to your preferred picture. 9 Category: Can be used for programme searching.
DR-MX10SE.book Page 81 Wednesday, December 14, 2005 3:37 PM Modify Thumbnail Modify Category E E Select “INDEX”. Select “CATEGORY”. SELECT SELECT CATEGORY CONFIRM CONFIRM F Editing INDEX Decide on the thumbnail image. F A Start playback, then pause at the desired scene. Select the desired category. SELECT ANIMATION CONFIRM 0 Use SLOWG/SLOWF to search for the scene. B Select AREPLACEB. G Exit category modification. SELECT CONFIRM REPLACE 0 The new image will be registered.
DR-MX10SE.book Page 82 Wednesday, December 14, 2005 3:37 PM Creating Programme Title Perform AModifying Thumbnail/CategoryB, step A D [ P80]. ABCDEFGHILM E 9 You can name or modify the titles of recorded programmes. 9 You can also name or modify the title name of the play list for HDD as well as DVD-RAM and DVD-RW/-R (VR mode and unfinalised Video mode) discs. Select “NAME”. SELECT NAME CONFIRM F Enter the characters. SELECT A E-G CONFIRM H 0 Select and enter one character at a time.
DR-MX10SE.book Page 83 Wednesday, December 14, 2005 3:37 PM F Creating/Deleting Chapters (Marks) Create or erase the chapters (marks). To create chapters (marks) A Start playback, then pause at the scene where you want to mark. ABCDEFGHILM Editing 9 If chapters (marks) are created in the recorded programme, a preferred scene in the programme can be easily located. 0 You can also use SLOWF/SLOWG. B Select AMARKB.
DR-MX10SE.book Page 84 Wednesday, December 14, 2005 3:37 PM B Display the Editing screen, then select AMODIFYB. Gathering Favourite Scenes (Play List Creation) ABCDEFGHILM MODIFY SELECT 9 A play list is a single programme with a collection of favourite scenes gathered from multiple original programmes. Up to 99 can be created. CONFIRM When HDD is selected A ORIGINAL MODIFY DELETE DEL SCEN DIVIDE PLAY LIST MODIFY DELETE CREATE B, I B-H C Select “CREATE”.
DR-MX10SE.book Page 85 Wednesday, December 14, 2005 3:37 PM H B Confirm on the start point. PROG 1 Select “EXIT”. SELECT 00 : 00: 05 CONFIRM CONFIRM 0 The image of the start point for the scene will be displayed on the AINB sub-screen. F EXIT Editing IN/OUT I Exit play list creation. Decide on the end point of the scene. A Start playback, then pause at the scene where you want the created play list to end.
DR-MX10SE.book Page 86 Wednesday, December 14, 2005 3:37 PM Editing Play List Modify Scene ABCDEFGHILM A Select disc. 9 You can modify or move the scenes of a created play list. In addition, new scenes can be added. OR B A Display the Editing screen. When DVD is selected A Load a disc. B Press EDIT to display the Editing screen. C Select AMODIFYB. B-G B When HDD is selected A Press EDIT to display the Editing screen. EDIT RETURN G-A C Select “MODIFY” under “PLAY LIST”.
DR-MX10SE.book Page 87 Wednesday, December 14, 2005 3:37 PM F Select the scene that you want to modify. A Select AMODIFYB. Playback end point Move Scenes A B Playback start point SELECT 0 : 12 : 33 - 0 : 13 : 25 PROG 1 0 : 24 : 27 - 0 : 25 : 12 PROG 1 0 : 14 : 42 - 0 : 16 : 34 PROG 2 0 : 14 : 15 - 0 : 16 : 34 PROG 2 CONFIRM C D MODIFY B Select the playback start or end point of a scene to modify. E SELECT Select and confirm on “MOVE” in step F - A.
DR-MX10SE.book Page 88 Wednesday, December 14, 2005 3:37 PM Deleting/Protecting a Programme ABCDEFGHILM 9 Deleting unwanted programmes can increase the disc remaining time. (However, the disc remaining time does not increase for DVD-R discs. For DVD-RW (Video mode) discs, the disc remaining time increases only when the last programme is deleted.) 9 Protect function to prevent accidental erasure is available for DVD-RAM and DVD-RW/-R (VR mode) discs.
DR-MX10SE.book Page 89 Wednesday, December 14, 2005 3:37 PM C Deleting Scenes Select “DEL SCEN”. SELECT ABCDEFGHILM 9 You can delete commercial breaks from a recorded programme. D B, G B-F E Select and confirm on a programme whose unwanted scenes you want to delete. Editing A DEL SCEN CONFIRM Decide on the unwanted scene to be deleted. A Start playback, then pause at the scene where you want the deletion to begin. E - A, C 0 You can also use SLOWF/SLOWG. B Select AINB.
DR-MX10SE.book Page 90 Wednesday, December 14, 2005 3:37 PM Dividing Scenes ABCDEFGHILM A B Press HDD. Display the Editing screen. 9 You can divide programmes that are recorded continuously. C A Select “DIVIDE” under “ORIGINAL”. SELECT DIVIDE CONFIRM C-F B, G D E-A E Select and confirm on a programme to divide. Search for scenes to divide. A Start playback, then pause at the scene to divide. 0 You can also use SLOWF/SLOWG. B Select and confirm on ADIVIDEB. C Select and confirm on AOKB.
DR-MX10SE.book Page 91 Wednesday, December 14, 2005 3:37 PM A Help Guide Access the “HELP” menu. 9 When you encounter problems with the operating procedures, the help guide displays advices on operations that are closely related to the current usage condition. 1 2 3 4 currently displayed screen appears. If there are no particular items to relate to, the first page of the index will be displayed. 0 The index page can be advanced using TOP MENU or MENU.
DR-MX10SE.book Page 92 Wednesday, December 14, 2005 3:37 PM Recording Mode FR (Free Rate) Mode ABCDEFGHILM 0 The numbers of the FR mode represent the recordable 9 The recording mode is the setting for the 0 FR60 - FR360 can be set by 5-minute intervals, then Recordable Time According to Recording follow by FR420 and FR480. FR60 is almost equivalent to XP in terms of image quality; the same goes for FR120 to SP, FR240 to LP, and FR360 to EP.
DR-MX10SE.book Page 93 Wednesday, December 14, 2005 3:37 PM JUST mode setting (when timer recording to a DVD disc) 0 The unit automatically sets the appropriate FR mode depending on the disc remaining time. 0 Set AREC MODEB to AJUSTB at the recording setting Records a 30-minute programme to fit exactly to a 20-minute blank space. Main characteristics 0 High image quality recording mode above XP mode. 0 There is no image deterioration when dubbing from a DV camcorder to the HDD using the DV terminal.
DR-MX10SE.book Page 94 Wednesday, December 14, 2005 3:37 PM Weekly/Daily Timer Programming Weekly/daily recording settings Set when timer programming or when changing the timer programme. ABCDEFGHILM 9 Programmes can be timer recorded regularly on a daily or weekly basis. 9 Recorded programmes set for weekly/daily recording overwrite on the HDD can be kept.
DR-MX10SE.book Page 95 Wednesday, December 14, 2005 3:37 PM Simple timer programming for the following week A Select and confirm on the programme that you wish to protect. SELECT Press PROG when playing back a recorded programme. Select “YES”. CONFIRM SELECT 0 Icon specifying weekly/daily overwrite ( , ) will be attached. CONFIRM YES 0 If there is inactivity for approximately 5 seconds, the programme navigation screen will be displayed. To cancel, press PROG.
DR-MX10SE.book Page 96 Wednesday, December 14, 2005 3:37 PM 0 You can also perform Resuming Playback Temporary Recording [ P61] and One Touch Replay [ P61]. ABCDEFGHILM To record the previous part of a TV programme currently watching (RetroActive Recording) 9 After turning on this unit, temporary recording will automatically take place for only the time duration that has been set while you are watching TV.
DR-MX10SE.book Page 97 Wednesday, December 14, 2005 3:37 PM Timer Recording Relief Recording ABCDEFGHILM 9 The following describe the measures and caution points to note during timer recording. Useful Features A programme that is set for timer recording on the DVD will be recorded to the HDD in the following instances. The recording mode will revert to the mode previously set. In the case of JUST mode, the recording will be in XP mode. 0 Disc is not loaded. 0 A non-recordable disc is loaded.
DR-MX10SE.book Page 98 Wednesday, December 14, 2005 3:37 PM Managing DVDs (Library) To Delete from Library ABCDEFGHILM A Press DVD. 9 Register DVD discs recorded on other units in the library. A maximum of 600 discs and 2000 titles can be registered. B Press EDIT. IMPORTANT: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . E Select and confirm on ADELETEB. 0 The following discs cannot be registered in the library.
DR-MX10SE.book Page 99 Wednesday, December 14, 2005 3:37 PM Recording with Best Picture Quality (VHS) ABCDEFGHILM When recording starts, the indicator as illustrated below appears on the TV screen. When this screen is displayed, the quality level for the best recording condition on the tape is assessed. 0 If this screen is not displayed, set the following. Setup NOTES: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 100 Wednesday, December 14, 2005 3:37 PM Sound Sound settings (HDD, DVD-RAM/-RW(VR)/-R(VR)) This unit can receive NICAM programmes. Programme type On-screen display and sound output Regular Monaural Normal monaural sound NICAM STEREO NICAM stereo sound NICAM Bilingual NICAM main audio NICAM sub audio NICAM Main+Sub audio NICAM FM Sound 0 Switches each time AUDIO is pressed. (Excluding NICAM FM Sound.
DR-MX10SE.book Page 101 Wednesday, December 14, 2005 3:37 PM Sound settings (VHS) Receiving NICAM programmes. On-screen display (none) NICAM STEREO ST NICAM NICAM Bilingual BIL. NICAM NICAM Monaural NICAM Useful Features Programme type Regular Monaural 0 To listen to a stereo programme, press AUDIO until AHIFI L W X RB appears on the TV screen. 0 To listen to a bilingual programme, press AUDIO until AHIFI L WB or AHIFI X RB appears on the TV screen.
DR-MX10SE.book Page 102 Wednesday, December 14, 2005 3:37 PM Manual Tracking/Tape Remaining Time (VHS) To Adjust Tracking Manually ABCDEFGHILM A During playback 9 The auto-tracking function is automatically activated to adjust picture distortion or flickering when tape playback begins. If picture distortion or flickering cannot be removed with auto-tracking, adjust tracking manually. NOTE: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 103 Wednesday, December 14, 2005 3:37 PM Avoiding Misuse To Disable Operation (Child Lock) 9 Setting the child lock will disable the buttons on the unit and the remote control. 9 If the tray lock is set, the disc tray will not function even when OPEN/CLOSE is pressed. When the unit is turned on Press and hold STANDBY/ON on the remote control for more than 10 seconds. seconds. To cancel the child lock Perform the same operation.
DR-MX10SE.book Page 104 Wednesday, December 14, 2005 3:37 PM Changing Remote Control Settings Operating a TV from Other Manufacturers Using Multiple JVC Recorders 9 This unit’s remote control can operate the basic functions of your TV. 9 With more than 2 devices, there may be remote control interference. PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . .
DR-MX10SE.book Page 105 Wednesday, December 14, 2005 3:37 PM Screen Display On-Screen Display 9 Displays on the TV screen when ON SCREEN is pressed. 0 During on air, when ON SCREEN is pressed or when the channel is changed, the programme title is displayed for approximately 5 seconds. Title number DVD Receiving channel Disc remaining time Recording deck Chapter number Current time TITLE99 CHAPTER999 T.REMAIN0:29:29 22:30 FR360 PR.
DR-MX10SE.book Page 106 Wednesday, December 14, 2005 3:37 PM Playback Setting Menu Operations ABCDEFGHILM 9 During disc playback, use this on-screen bar to perform settings such as playback mode, image or audio mode. How to Use the Playback Setting Menu A Press ON SCREEN once or twice to display the playback setting menu. When playing back a programme recorded on the HDD A-B PREPARATION: .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
DR-MX10SE.book Page 107 Wednesday, December 14, 2005 3:37 PM Description of Each Setting Repeat Playback HDD DVD 0 0 0 0 OFF Plays back normally. ALL REPEAT The entire disc is played back repeatedly. TITLE REPEAT The current title is played back repeatedly. CHAPTER REPEAT The current chapter is played back repeatedly. TRACK REPEAT The current track is played back repeatedly. ACHAPTER REPEATB and ATRACK REPEATB are not available for DVD discs. For HDD, only ATITLE REPEATB is available.
DR-MX10SE.book Page 108 Wednesday, December 14, 2005 3:37 PM Playback Setting Menu Operations (continued) PRGM Programme Playback Play back in order of specified tracks. If selected during programme playback, normal playback will be activated. A box for specifying the playback order appears when the menu is selected. Enter the track number in order from 1 using the Number Keys. For 1-digit numbers, confirm using ENTER. If you made a mistake, press CANCEL. Play back using PLAY.
DR-MX10SE.book Page 109 Wednesday, December 14, 2005 3:37 PM Setup Menu 9 Performing basic settings that determine the operations of this unit. Press SET UP to access the setup menu. (Upper category) > (Lower category) Useful Features No. (Setting item) (Description of setting contents) (Default setting) (Description of setting contents) (Other settings) (Description of setting contents) DVD VIDEO SET UP > LANGUAGE SET A MENU LANGUAGE For setting the menu screen language for DVD Videos.
DR-MX10SE.book Page 110 Wednesday, December 14, 2005 3:37 PM Setup Menu (continued) DVD VIDEO SET UP > AUDIO OUTPUT D DIGITAL AUDIO OUT Set in accordance with the device connected to the digital audio output terminal (digital coaxial). In addition, change the setting when playing back bilingual sound. [ P100] DOLBY DIGITAL/PCM When connecting to a Dolby Digital decoder or an amplifier with built-in decoder. STREAM/PCM When connecting to a DTS, Dolby Digital decoder or an amplifier with built-in decoder.
DR-MX10SE.book Page 111 Wednesday, December 14, 2005 3:37 PM HDD/DVD SET UP > DVD SET UP K SAVE AS LIBRARY OFF Do not register. ON Register. L CONTINUOUS PLAY For setting whether to play back multiple programme titles on a disc continuously. (For finalised DVD-RW/-R (Video mode), continuous playback will be activated.) OFF Returns to the broadcast screen after playing back a programme. ON Plays back programme titles on a disc in sequence.
DR-MX10SE.book Page 112 Wednesday, December 14, 2005 3:37 PM Setup Menu (continued) HDD/DVD SET UP > COMMON SET UP U MOTION INDEX For setting whether to set the picture on the top left of the Library Database Navigation screen or Editing screen to that of the selected programme or broadcast screen. If a programme recorded in DV mode is selected during recording or temporary recording, the broadcast screen will be displayed. OFF The broadcast screen will be displayed.
DR-MX10SE.book Page 113 Wednesday, December 14, 2005 3:37 PM FUNCTION SET UP > DISPLAY SET a SUPERIMPOSE For setting whether to automatically display the operation details on the TV screen. Do not display. AUTO Displays for 5 seconds during operations. Useful Features OFF b BLUE BACK For setting whether to display a blue screen, when broadcast cannot be received or if there are no signals at the external input. Set to AOFFB when the signals are weak or reception is poor.
DR-MX10SE.book Page 114 Wednesday, December 14, 2005 3:37 PM Setup Menu (continued) FUNCTION SET UP > VIDEO IN/OUT g MONITOR TYPE Set in accordance with the TV to be connected. 4:3LB When connected with a 4:3 TV. (Black strips are added to the top and bottom when displaying a 16:9 image.) 4:3PS When connected with a 4:3 TV. (The left and right are cropped off when displaying a 16:9 image.) 16:9AUTO When connected with a wide TV (16:9). 16:9FIX When connected with a TV fixed at 16:9.
DR-MX10SE.book Page 115 Wednesday, December 14, 2005 3:37 PM 9 Performing basic settings that determine the operations of VHS. Press VHS to set to VHS mode, then press SET UP to access the setup menu. VHS SET UP For recording with the picture quality that best matches the tape. [ Useful Features l B.E.S.T. P99] OFF If you do not wish to use this function. ON If you wish to record in the condition that best matches your tape. m PICTURE CONTROL For selecting the best picture quality during playback.
DR-MX10SE.book Page 116 Wednesday, December 14, 2005 3:37 PM TV Station and ID List 9 The AIDB abbreviation is what is shown on-screen in lieu of the station name. The AIDB abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station.
DR-MX10SE.book Page 117 Wednesday, December 14, 2005 3:37 PM TV Station Channel Number Guide 9 Only the main stations are listed. There are in addition many relay stations, and full lists are available from the BBC and ITV. BBC2 ITV CH4 CH5 46 33 56 52 63 43 23 66 64 60 65 30 53 67 53 ^ 37 ^ ^ 49 South-West Beacon Hill.................57 Caradon Hill ...............22 Huntshaw Cross.........55 Redruth ......................51 Stockland Hill .............33 Channel Islands Fremont Point.............
DR-MX10SE.
DR-MX10SE.book Page 119 Wednesday, December 14, 2005 3:37 PM Glossary Digital signals of compressed sounds or images. Chapter A unit for segments of music and images in the titles of DVD Videos, etc. It can be freely created for programmes recorded using this unit. (For DVD-RAM and DVD-RW (VR) discs.) Decoder A device that reverts compressed signals of sounds and images to their original signals. Dolby Digital A compression process system for audio signals. A standard system for 5.
DR-MX10SE.book Page 120 Wednesday, December 14, 2005 3:37 PM Q&A Preparations Recording Which discs are unplayable? Can I use cartridge-enclosed DVD-RAMs? See AAbout DiscsB [ The time of the clock seems to deviate. See AClock SettingB [ P34]. P12]. Can I record simultaneously on the HDD and DVD? Can I replace the HDD on my own? No. This unit’s HDD contains software required for operations, and will not function if replaced with a commercially available HDD.
DR-MX10SE.book Page 121 Wednesday, December 14, 2005 3:37 PM Playback Does not perform as operated when playing a commercially available DVD Video. Can I perform reverse playback (-1x speed playback) on Video CDs? No. Reverse slow playback is also not possible. HIGH SPEED dubbing: Dubs using the same recording mode as the HDD. JUST dubbing: Dubs using the same recording mode as the HDD, but when the disc remaining time is insufficient, dubbing will be performed using a lower recording mode.
DR-MX10SE.book Page 122 Wednesday, December 14, 2005 3:37 PM Troubleshooting Resetting The unit does not operate. APLEASEB and AWAITB display alternately, or ARESETTINGB blinks for a long time after the power plug is inserted. Is it a malfunction? 0 0 It normally takes about 40 seconds to prepare before you can start any operations. Operations cannot be performed during this period. If the display does not seem to disappear, reset the unit.
DR-MX10SE.book Page 123 Wednesday, December 14, 2005 3:37 PM Playback does not start. 0 0 There is no sound from the coaxial output when performing 1.5x speed playback on the HDD. To output sound from the coaxial digital sound output terminal on the rear of this unit, check the following setting. Setup Menu ADIGITAL AUDIO OUTB = APCM ONLYB [ P110] D The main and sub audio cannot be switched when the coaxial digital sound output terminal on the rear of this unit is connected.
DR-MX10SE.book Page 124 Wednesday, December 14, 2005 3:37 PM On-screen Message Playback Message HDD DVD Advice NO TITLE RECORDED Record a programme first. UNABLE TO GO FORWARD ANY MORE Unable to advance to the end position of the programme or a position ahead of the current recording position. UNABLE TO GO BACK ANY MORE Unable to return to a position before the start of recording.
DR-MX10SE.book Page 125 Wednesday, December 14, 2005 3:37 PM Timer Programming Message HDD There is no recordable space remaining in the hard disk. Increase the recordable space by dubbing the currently recorded programmes to DVD first, then delete the programmes. [ P88] CAN NOT PERFORM TIMER RECORDING CHECK PROGRAMME LIST TO CONFIRM For HDD timer programming, there are timer programmes that cannot be recorded within the duration set due to the remaining capacity of HDD.
DR-MX10SE.book Page 126 Wednesday, December 14, 2005 3:37 PM Specifications GENERAL VIDEO/AUDIO (VHS Deck) Power requirement AC 220 V - 240 V H, 50 Hz/60 Hz Power consumption Power on: 45 W Power off: 6.7 W Temperature Operating: 5I to 35I Storage: -20I to 60I Operating position Horizontal only Dimensions (WxHxD) 435 mm x 96 mm x 384 mm Weight 6.
x DR-MX10SE.book Page 127 Wednesday, December 14, 2005 3:37 PM List of Terms A N A-B Repeat Playback ................................. 107 Adjusting the Picture Quality ...................... 108 Angle Selection ........................................... 63 Audio language ................................... 63, 109 NICAM ............................................. 100, 112 O B Basic Playback (Library Database Navigation) ................. 42 Basic Recording ....................................
DR-MX10SE.