Filename [DR-M10U_02Cov1.fm] DR-M10U_02Cov1.
Filename [DR-M10U_03Safety.fm] Masterpage:Left0 DR-M10U_03Safety.fm Page 2 Monday, April 5, 2004 11:18 AM 2 EN Dear Customer, Thank you for purchasing the JVC DVD video recorder. Before use, please read the safety information and precautions to ensure safe use of your new unit. CAUTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: This unit should be used with AC 120Vd, 60Hz only.
Filename [DR-M10U_03Safety.fm] DR-M10U_01.book Page 3 Friday, January 16, 2004 7:38 PM Masterpage:Right-No-Heading EN IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing. 3 5.
Filename [DR-M10U_03Safety.fm] Masterpage:Left-No-Heading DR-M10U_01.book Page 4 Friday, January 16, 2004 7:38 PM 4 EN USE SERVICING 1. Accessories To avoid personal injury: ● Do not place this product on an unstable cart, stand, tripod, bracket, or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. ● Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
Filename [DR-M10U_03Safety.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 5 Friday, January 16, 2004 7:38 PM EN This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Filename [DR-M10U_04TOC.fm] Masterpage:Left DR-M10U_01.book Page 6 Friday, January 16, 2004 7:38 PM 6 EN CONTENTS DISC INFORMATION 7 About Discs ......................................................... 7 INDEX 12 INSTALLING YOUR NEW UNIT 18 Basic Connections ............................................. 18 S-VIDEO Connection ........................................ 19 Component Video Connection .......................... 20 INITIAL SETTINGS 21 Plug & Play Set .................................
Filename [DR-M10U_05DiscInfo.fm] Masterpage:Right0 DR-M10U_05DiscInfo.fm Page 7 Friday, March 5, 2004 11:50 AM EN DISC INFORMATION About Discs Recordable/playable discs You can use discs with the following logos for recording and playback. DVD-RAM DVD-R DVD-RW 12 cm: 4.7 GB/9.4 GB 8 cm: 1.4 GB/2.8 GB (VR mode) Version 2.0 Version 2.1 Version 2.1/3x 12 cm: 4.7 GB 8 cm: 1.4 GB (Video mode) General Version 2.0 General Version 2.0/4x General Version 2.0/8x 12 cm: 4.7 GB (Video mode/VR mode) Version 1.
Filename [DR-M10U_05DiscInfo.fm] Masterpage:Left+ DR-M10U_01.book Page 8 Friday, January 16, 2004 7:38 PM 8 EN DISC INFORMATION (cont.) Discs for Playback Only Unplayable Discs You can use discs with the following logos for playback only. The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in unusual shapes (heart-shaped, octagonal, or other forms).
Filename [DR-M10U_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 9 Friday, January 16, 2004 7:38 PM EN Recording Medium and Format File Structure of Discs DVD-RAM DVD VIDEO ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted parts. ● While recording, it is possible not only to start playback of a program currently being recorded, but also to watch another program previously recorded.
Filename [DR-M10U_05DiscInfo.fm] Masterpage:Left+ DR-M10U_01.book Page 10 Friday, January 16, 2004 7:38 PM 10 EN JPEG/MP3 Disc (CD-R/RW/ROM) MP3/JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories (groups) by the MP3/JPEG Navigation of this unit. (墌 pg. 84) File structure of a disc before starting the MP3/JPEG Navigation DISC INFORMATION (cont.
Filename [DR-M10U_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M10U_05DiscInfo.fm Page 11 Friday, April 2, 2004 5:11 PM EN Placing a Disc 11 Care and Handling of Discs Opening the disc tray Press x on the unit or Remote to open the disc tray. REC MODE LIVE CHECK OPEN/ SET UP DISPLAY ON SCREEN CLOSE REC MODE AUDIO SUBTITLE ANGLE How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged.
Filename [DR-M10U_06-1Name.fm] Masterpage:Left0 DR-M10U_01.book Page 12 Friday, January 16, 2004 7:38 PM 12 EN INDEX FRONT VIEW A B C D EFG H I REC MODE 1 STANDBY/ON F1 DV S-VIDEO J VIDEO K A Infrared Beam Receiving Window B Front Display Panel 墌 pg. 14 C Disc Tray D Open/Close Button (x) 墌 pg. 11 E Stop Button (8) 墌 pg. 35, 57 F Play Button (4) 墌 pg. 35 G Pause Button (9) 墌 pg. 35 H Recording Mode Button (REC MODE) 墌 pg. 57 DV IN L(MONO)-AUDIO-R L I Record Button (7) 墌 pg.
Filename [DR-M10U_06-1Name.fm] Masterpage:Right-No-Heading DR-M10U_06-1Name.fm Page 13 Friday, March 5, 2004 11:50 AM EN 13 REAR VIEW A B IN C D EF G Y S-VIDEO L-1 H I L-2 VIDEO PB S-VIDEO LEFT OUT VIDEO LEFT L-1 1 AV COMPU LINK AUDIO PR RIGHT PCM STREAM AUDIO DIGITAL OUT L-2 RIGHT ANTENNA J COMPONENT OUTPUT K A Antenna Input Connector (ANTENNA IN) 墌 pg. 18 B Component Video Output Connectors (COMPONENT OUTPUT) 墌 pg.
Filename [DR-M10U_06-1Name.fm] DR-M10U_01.book Page 14 Friday, January 16, 2004 7:38 PM 14 EN Masterpage:Left+ INDEX (cont.) FRONT DISPLAY PANEL A Disc Type/Status Indicator When a disc is loaded, the type of the disc is indicated. When a disc is running, the disc marks rotate. During High-Speed Search: Rotate faster than normal playback. During Slow Motion: Rotate slower than normal playback. While recording: Inner red ring lights in the same way as normal playback.
Filename [DR-M10U_06-1Name.fm] DR-M10U_01.book Page 15 Friday, January 16, 2004 7:38 PM Masterpage:Right-No-Heading EN G Simulated Surround Effect Indicator (3D) 墌 pg. 50 Lights when a simulated surround effect is set to “3D-ON” in Play Set Up menu. H Linear PCM Indicator (LPCM) Lights when “XP MODE REC AUDIO” is set to “LINEAR PCM” (墌 pg. 98) for recording with DVD-RAM, DVD-R and DVD-RW discs, and when Linear PCM audio is played.
Filename [DR-M10U_06-1Name.fm] Masterpage:Left+ DR-M10U_06-1Name.fm Page 16 Thursday, March 4, 2004 5:14 PM 16 EN INDEX (cont.) ON-SCREEN DISPLAY When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the Remote is pressed in Record mode, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN again. A Disc Display Displays the type of the disc loaded on the disc tray. B Title Number* Displays number of the title currently being played back.
Filename [DR-M10U_06-1Name.fm] Masterpage:Right-No-Heading DR-M10U_06-1Name.
Filename [DR-M10U_06-1Name.fm] Masterpage:Left0 DR-M10U_06-1Name.fm Page 18 Friday, March 5, 2004 11:51 AM 18 EN INSTALLING YOUR NEW UNIT Basic Connections Antenna or Cable Matching transformer (not supplied) IN Y S-VIDEO L-1 Place the unit on a stable, horizontal surface.
Filename [DR-M10U_06-1Name.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 19 Friday, January 16, 2004 7:38 PM EN 8 To connect to TV’s S-VIDEO input and AUDIO input connectors S-VIDEO Connection A Connect the unit to a TV. Antenna or Cable Coaxial cable Plug the end of the AC power cord into an AC outlet. This unit performs Plug & Play Set automatically. (墌 pg.
Filename [DR-M10U_06-1Name.fm] Masterpage:Left+ DR-M10U_01.book Page 20 Friday, January 16, 2004 7:38 PM 20 EN INSTALLING YOUR NEW UNIT (cont.) Component Video Connection Antenna or Cable Coaxial cable Flat feeder AC Outlet AUDIO OUTPUT AC Power Cord Y S-VIDEO L-1 L-2 VIDEO LEFT OUT VIDEO LEFT S-VIDEO PB L-1 1 AV COMPU LINK AUDIO PR RIGHT PCM STREAM AUDIO DIGITAL OUT L-2 A Connect the unit to TV. A Perform A – C in step C in “Basic Connections” (墌 pg. 18).
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right0 DR-M10U_06-2Initial Set.fm Page 21 Thursday, February 5, 2004 6:55 PM EN INITIAL SETTINGS 21 This unit sets the clock and tuner channels automatically when AC power cord is first connected to an AC outlet. The antenna cable must be connected for the Plug & Play setting. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_01.book Page 22 Friday, January 16, 2004 7:38 PM 22 EN INITIAL SETTINGS (cont.) C Select the desired language. Language ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. D Complete the setting. Press SET UP. CABLE/DBS TV A Press rt to move the arrow to “ON SCREEN LANGUAGE”, then press ENTER. B Press rt to select your desired language, then press ENTER.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right 3Column DR-M10U_01.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_06-2Initial Set.fm Page 24 Monday, January 26, 2004 10:54 AM 24 EN INITIAL SETTINGS (cont.) Perform clock setting only if the clock has not been set correctly by the Plug&Play setting. Clock Set ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. Semiauto Clock Set You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right-No-Heading DR-M10U_06-2Initial Set.fm Page 25 Monday, February 2, 2004 2:59 PM EN F Select the time zone. A Press rt to move the arrow to “TIME ZONE”, then press ENTER. B Press rt to select “AUTO” or the desired time zone, then press ENTER. Each time you press rt, the time zone changes as follows: {AUTO{ATLANTIC{EASTERN{CENTRAL{ MOUNTAIN{PACIFIC{ALASKA{HAWAII{ (back to the beginning) Manual Clock Set A Access the Main Menu screen. Press SET UP.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_01.book Page 26 Friday, January 16, 2004 7:38 PM 26 EN INITIAL SETTINGS (cont.) Auto Channel Set Tuner Set Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. DVD A Press w e to select “INITIAL SET UP”, then press ENTER. B Press w e to select “TUNER SET”, then press ENTER.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right-No-Heading DR-M10U_06-2Initial Set.fm Page 27 Monday, January 26, 2004 10:55 AM EN Manual Channel Set CABLE/DBS TV DVD You can add the channels you want or delete the channels you do not want manually. STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD 0–9 A Access the Main Menu screen. TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ Press SET UP. CH B Access the “TUNER SET” screen.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_01.book Page 28 Friday, January 16, 2004 7:38 PM 28 EN Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. A Access the Main Menu screen. Press SET UP. B Access the “VIDEO IN/OUT” screen.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 29 Friday, January 16, 2004 7:38 PM EN Cable Box Control Setting Place the cable box on top of the unit. Attach the unit’s Controller to the top of the unit with the Controller’s transmitter pointed towards the cable box’s remote sensor. ATTENTION: The Controller can also control a DBS receiver.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_06-2Initial Set.fm Page 30 Thursday, March 4, 2004 5:15 PM 30 EN INITIAL SETTINGS (cont.) Setting cable box’s brand and channel CABLE/DBS TV DVD After installation, set the cable box’s brand and channel correctly; otherwise, the Controller cannot work correctly. STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right-No-Heading DR-M10U_06-2Initial Set.fm Page 31 Thursday, March 4, 2004 5:15 PM EN E Enter the cable box’s brand. A Press rt to move the arrow to “CABLE BOX BRAND”, then press ENTER. B Press rt to select the brand code from the following list, then press ENTER. C Press rt to move the arrow to “TEST MODE”, then press ENTER. If the cable box’s channel changes to 9, setting is complete.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_01.book Page 32 Friday, January 16, 2004 7:38 PM 32 EN INITIAL SETTINGS (cont.) The following procedure is required if you receive satellite channels through a DBS (Direct Broadcast Satellite) receiver. The Controller allows the unit to automatically switch the DBS receiver’s channel during timer recording. DBS Receiver Control Setting NOTES: Place the DBS (Direct Broadcast Satellite) receiver on top of the unit.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Right-No-Heading DR-M10U_06-2Initial Set.fm Page 33 Thursday, March 4, 2004 5:15 PM EN Setting DBS receiver’s brand and channel CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD After installation, set the DBS receiver’s brand and channel correctly; otherwise, the Controller cannot work correctly. TV VOLUME DEF ABC GHI JKL MNO PQRS TUV WXYZ CH ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [DR-M10U_06-2Initial Set.fm] Masterpage:Left+ DR-M10U_06-2Initial Set.fm Page 34 Thursday, February 5, 2004 6:56 PM 34 EN INITIAL SETTINGS (cont.) E Enter the DBS receiver’s brand. A Press rt to move the arrow to “DBS RECEIVER BRAND”, then press ENTER. B Press rt to select the brand code from the following list, then press ENTER. C Press rt to move the arrow to “TEST MODE”, then press ENTER. The program currently received through the DBS receiver appears.
Filename [DR-M10U_07Playback.fm] Masterpage:Right0 DR-M10U_01.book Page 35 Friday, January 16, 2004 7:38 PM EN PLAYBACK OPERATIONS 35 To play back an MP3/JPEG disc, see “Playback with MP3/JPEG Navigation” (墌 pg. 84). Basic Playback A Load a disc. A Press x to open the disc tray. B Place the disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 11). ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.book Page 36 Friday, January 16, 2004 7:38 PM 36 EN PLAYBACK OPERATIONS (cont.) Playback Features ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD 0–9 DVD 1 DEF GHI JKL MNO PQRS TUV WXYZ TIMER When “X” appears on the TV screen in step 1, the disc does not have a top menu or disc menu.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_07Playback.fm Page 37 Friday, March 5, 2004 11:51 AM EN 37 High-Speed Search Resume Function During playback, press 5 for forward high-speed search, or 3 for reverse high-speed search. It is possible to memorize the position where you stop playback and resume playback from that position. ● Be sure to set “RESUME” to “ON” or “DISC RESUME”. (墌 pg. 100) ● Each press of the button increases the search speed for each direction.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.book Page 38 Friday, January 16, 2004 7:38 PM 38 EN PLAYBACK OPERATIONS (cont.) NOTES: CABLE/DBS TV ● When a monaural program or bilingual program changes to a stereo program while recording, a mark signal is automatically recorded. ● When a DVD-R/RW (Video mode) disc is finalized, marked points marked before finalizing will be deleted, and programs will be divided automatically into “chapters” approximately every 5 minutes. (墌 pg.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 39 Friday, January 16, 2004 7:38 PM EN 39 Angle Selection Audio Language/Sound Selection You can enjoy a variety of scene angles if a DVD VIDEO disc contains “multi-angle” parts, where the same scene was shot from different angles. If the disc contains “multi-angle” parts, “ ” appears on the TV screen at the beginning of the “multi-angle” part. Some DVD VIDEO discs contain the multiple audio language or sound.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.book Page 40 Friday, January 16, 2004 7:38 PM 40 EN PLAYBACK OPERATIONS (cont.) Playback Control (PBC) Function — Locating a desired scene using the menu of a Video CD/SVCD with PBC CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD 0–9 TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ CH Some Video CD/SVCD discs support the PBC function. PBC is an abbreviation of “Play Back Control”.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 41 Friday, January 16, 2004 7:38 PM EN Recording/playback status display Live Memory Playback CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD This unit records pictures onto DVD-RAM discs, instead of video tapes, then plays back the pictures recorded on the discs.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.book Page 42 Friday, January 16, 2004 7:38 PM 42 EN PLAYBACK OPERATIONS (cont.) Overview of Live Memory Playback You can play back a program you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc. This is called “Live Memory Playback”.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_07Playback.fm Page 43 Thursday, March 4, 2004 5:18 PM EN 43 Display during Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the red or blue bar on the TV screen.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.book Page 44 Friday, January 16, 2004 7:38 PM 44 EN PLAYBACK OPERATIONS (cont.) Buttons to be used during Live Memory Playback Available buttons CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ 6 CANCEL ● Pressing down for 2 or more seconds advances playback at 1/16 times the normal speed.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 45 Friday, January 16, 2004 7:38 PM EN ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. CABLE/DBS TV GHI JKL MNO PQRS TUV WXYZ ● Playback starts from the beginning of the program being recorded. ● Pressing 2/6 allows you to locate the desired scenes.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_07Playback.fm Page 46 Tuesday, January 20, 2004 11:11 AM 46 EN PLAYBACK OPERATIONS (cont.) Using Play Set Up Menu How to Access Play Set Up Menu Press ON SCREEN twice whenever a disc is loaded. Contents of Play Set Up Menu during playback DVD VIDEO Play Set Up Menu allows you to control various playback functions. Some of the functions operated on Navigation Menu can be controlled on Set Up Menu.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_07Playback.fm Page 47 Tuesday, January 20, 2004 10:04 AM EN Basic operation on Play Set Up Menu CABLE/DBS TV 47 DVD Example: When selecting Picture Control function of DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD During playback or while stopped 1 Access Play Set Up Menu. TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ Press ON SCREEN twice. ● The item currently selected is highlighted and pointed by H.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_07Playback.fm Page 48 Tuesday, January 20, 2004 10:04 AM 48 EN PLAYBACK OPERATIONS (cont.) Repeat Playback CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD 0–9 You can repeat playback as you like according to the type of disc. TV VOLUME DEF ABC GHI JKL MNO PQRS TUV WXYZ 1 Access Play Set Up Menu. CH Press ON SCREEN twice. DBS & CANCEL 2 Select the menu item.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_07Playback.fm Page 49 Tuesday, January 20, 2004 10:04 AM EN A-B Repeat Playback 49 Locating the beginning of a desired selection You can repeat the desired part. During playback You can locate the beginning of a title, chapter, group or track. 1 Access Play Set Up Menu. During playback or while stopped Press ON SCREEN twice. 1 Access Play Set Up Menu. 2 Select the menu item. Press ON SCREEN twice. Press w e to select “ ”.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_07Playback.fm Page 50 Tuesday, January 20, 2004 10:04 AM 50 EN PLAYBACK OPERATIONS (cont.) Time Search Simulated Surround Effect You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a title (DVD-RAM, DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD and Audio CD). It is possible to get a simulated surround effect from your stereo system.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_07Playback.fm Page 51 Tuesday, January 20, 2004 10:04 AM EN 51 Adjusting the picture quality Setting the progressive mode You can obtain optimal picture quality by selecting an appropriate picture mode. You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). 1 Access Play Set Up Menu. Press ON SCREEN twice. 2 Select the menu item.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_07Playback.fm Page 52 Thursday, February 5, 2004 7:02 PM 52 EN PLAYBACK OPERATIONS (cont.) Program Playback Random Playback You can play back up to 30 tracks in the desired order. You can play back all the tracks on the disc in random order. While stopped While stopped 1 Access Play Set Up Menu. 1 Access Play Set Up Menu. Press ON SCREEN twice. Press ON SCREEN twice. 2 Select the menu item. 2 Select the menu item.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_07Playback.fm Page 53 Tuesday, January 20, 2004 10:04 AM EN B Access the “PARENTAL LOCK” screen. Parental Lock This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced by other scenes.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.book Page 54 Friday, January 16, 2004 7:38 PM 54 EN PLAYBACK OPERATIONS (cont.) To change the settings To temporarily release Parental Lock You can change the Parental lock settings later. When you set the parental lock level strictly, some discs may not be played back at all.
Filename [DR-M10U_07Playback.fm] Masterpage:Right-No-Heading DR-M10U_01.
Filename [DR-M10U_07Playback.fm] Masterpage:Left+ DR-M10U_01.
Filename [DR-M10U_08Recording.fm] Masterpage:Right0 DR-M10U_08Recording.fm Page 57 Thursday, March 4, 2004 5:19 PM EN RECORDING 57 B Choose a program. Basic Recording Press CH +/– or the number keys to select the channel you wish to record. C Set the recording speed. ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. Press REC MODE repeatedly until the desired recording speed appears.
Filename [DR-M10U_08Recording.fm] Masterpage:Left+ DR-M10U_08Recording.fm Page 58 Tuesday, January 20, 2004 10:06 AM 58 EN RECORDING (cont.) Recording Features Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. 1 Start recording.
Filename [DR-M10U_08Recording.fm] Masterpage:Right-No-Heading DR-M10U_08Recording.fm Page 59 Thursday, March 4, 2004 5:20 PM EN Free Rate Function 59 NOTES: To record the entire program, the unit automatically set the appropriate recording speed depending on the combination of the total time of the program to be recorded and either the remaining disc space or the specified recording time (from 60 minutes to 480 minutes).
Filename [DR-M10U_08Recording.fm] Masterpage:Left0 DR-M10U_08Recording.fm Page 60 Tuesday, January 20, 2004 10:24 AM 60 EN TIMER RECORDING VCR Plus+ Timer Programing ® You can program this unit to timer-record as many as 8 programs. With the VCR Plus+ system, timer programing is greatly simplified because each TV program has a corresponding code number which your unit is able to recognize. You can use the Remote to enter the PlusCode number.
Filename [DR-M10U_08Recording.fm] Masterpage:Right-No-Heading DR-M10U_08Recording.fm Page 61 Tuesday, January 20, 2004 10:24 AM EN the following recording options as E Set required. 61 NOTES: A Press w e to select the desired option. B Press rt to select the desired setting, then press ENTER. “REC MODE” (墌 pg. 58, “Recording Speed”) (墌 pg. 59, “Free Rate Function”), “DAILY/WEEKLY” (墌 pg. 61, “Daily/Weekly Rec Function”), “NAME” (墌 pg.
Filename [DR-M10U_08Recording.fm] Masterpage:Left+ DR-M10U_08Recording.fm Page 62 Monday, February 2, 2004 3:10 PM 62 EN TIMER RECORDING (cont.) Changing VCR Plus+ Setting ® ● Turn on the unit. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. NOTES: CABLE/DBS TV DVD ● In many instances, the VCR Plus+ guide channel numbers for cable and broadcast TV stations DO NOT match the channel number on which it is received by your unit or cable box.
Filename [DR-M10U_08Recording.fm] DR-M10U_08Recording.fm Page 63 Tuesday, January 20, 2004 10:24 AM Masterpage:Right-No-Heading EN 63 D Enter the receiving channel position number. A Press rt to select “DVD CH”, then press ENTER. B Press rt to select the number of the unit’s channel position on which the Guide Channel number’s broadcast is received by the unit or the DBS receiver. Then press ENTER.
Filename [DR-M10U_08Recording.fm] Masterpage:Left+ DR-M10U_08Recording.fm Page 64 Tuesday, February 3, 2004 6:31 PM 64 EN TIMER RECORDING (cont.) A Load a disc. Manual Timer Programing A Press x to open the disc tray. B Place a recordable disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 11). C Press x to close the disc tray. You can program this unit to timer-record as many as 8 programs.
Filename [DR-M10U_08Recording.fm] Masterpage:Right-No-Heading DR-M10U_08Recording.fm Page 65 Monday, January 26, 2004 10:57 AM EN F Enter the recording stop time. Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. ● Each press of rt advances/goes back the stop time in 1-min. increments. ● To advance/go back the stop time in 30-min. increments, press and hold rt. G Enter the channel position.
Filename [DR-M10U_08Recording.fm] Masterpage:Left+ DR-M10U_01.book Page 66 Friday, January 16, 2004 7:38 PM 66 EN TIMER RECORDING (cont.) To make the disc for On-Disc Timer Programing On-Disc Timer Programing A Load a disc. A Press x to open the disc tray. B Place a recordable disc on the disc tray. On-Disc Timer Programing is a function used with discs that are especially intended for a specific program. The disc is then programed for a program you always watch every day or every week.
Filename [DR-M10U_08Recording.fm] Masterpage:Right-No-Heading DR-M10U_08Recording.fm Page 67 Monday, January 26, 2004 11:08 AM EN F Enter the recording stop time. Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. ● Each press of rt advances/goes back the stop time in 1-min. increments. ● To advance/go back the stop time in 30-min. increments, press and hold rt. G Enter the channel position. H Set “DAILY/WEEKLY” option.
Filename [DR-M10U_08Recording.fm] Masterpage:Left+ DR-M10U_01.book Page 68 Friday, January 16, 2004 7:38 PM 68 EN TIMER RECORDING (cont.) How discs are overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode Overwritten 1st Blank 2nd 1st 2nd 3rd The first program is overwritten by the third. Overwritten 4th 3rd The second program is overwritten by the forth.
Filename [DR-M10U_08Recording.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 69 Friday, January 16, 2004 7:38 PM EN CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD DVD 1 TV VOLUME ABC DEF GHI JKL MNO PQRS TUV WXYZ PROG/CHECK CANCEL AUX MEMO/MARK VCR Plus+ PROG/CHECK REC LINK TOP MENU TIMER REC LINK # NAVIGATION ENTER MENU RETURN PREVIOUS rtwe ENTER NEXT SLOW PLAY/SELECT SLOW REC STOP/CLEAR PAUSE C Access the program screen.
Filename [DR-M10U_08Recording.fm] Masterpage:Left DR-M10U_08Recording.fm Page 70 Tuesday, January 20, 2004 10:26 AM 70 EN When programs overlap each other CABLE/DBS TV DVD If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Program Check screen appears and conflicting programs will be highlighted in pink.
Filename [DR-M10U_08Recording.fm] Masterpage:Right-No-Heading DR-M10U_08Recording.fm Page 71 Monday, January 26, 2004 11:09 AM EN Satellite Auto Recording Before performing the following steps: ● Make sure the DBS receiver is connected to the unit’s AUDIO/VIDEO INPUT (L-1) connectors. ● Program the timer on the DBS receiver. ● Slide the TV/CABLE/DBS/DVD switch to DVD. A Set the recording speed.
Filename [DR-M10U_09Navigation.fm] DR-M10U_01.book Page 72 Friday, January 16, 2004 7:38 PM 72 EN Masterpage:Left0 NAVIGATION Library Database DVD Navi The Library Database DVD Navi enables you to search and select the desired programs recorded on a DVD-RAM/R/RW disc very easily. You can record up to 99 programs on a disc. Each time a program is recorded on the disc, the information of the program is registered for the Library Database DVD Navi automatically.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_09Navigation.fm Page 73 Friday, March 5, 2004 11:52 AM EN Using Library Database DVD Navi system, you can easily modify registered information, edit the program or play list, as well as search for the beginning of each program. About registration of information The following information is automatically registered for each program when ordinary recording or timer recording is performed, then stored in an area specified on the unit.
Filename [DR-M10U_09Navigation.fm] Masterpage:Left+ DR-M10U_01.book Page 74 Friday, January 16, 2004 7:38 PM 74 EN NAVIGATION (cont.) Scan for Beginning(s) of Program(s) ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. You can scan the beginning of the program easily with the Library Database DVD Navi. A Turn on the unit. On the unit Press 1.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_09Navigation.fm Page 75 Tuesday, January 20, 2004 10:28 AM EN Modify Original Information 75 Modify Index A Turn on the unit. On the unit Press 1. On the Remote Press DVD 1. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. A Press NAVIGATION. The Library Database DVD Navi screen appears. B Press rt w e to move the arrow to “ORIGINAL”, then press ENTER.
Filename [DR-M10U_09Navigation.fm] Masterpage:Left+ DR-M10U_09Navigation.fm Page 76 Thursday, March 4, 2004 5:21 PM 76 EN Modify Program Name Perform steps A to C of “Modify Index” (墌 pg. 75) before continuing. NAVIGATION (cont.) Modify Category Perform steps A to C of “Modify Index” (墌 pg. 75) before continuing. A Access the modify screen. A Access the modify screen. B Enter new name. B Select new category. A Press rt w e to move the arrow to “MODIFY”, then press ENTER.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 77 Friday, January 16, 2004 7:38 PM EN Delete program You cannot record any more with Library Database DVD Navi once the registered programs on the disc reach 99 programs. Deleting unnecessary programs after dubbing (墌 pg. 89, “Edit To Or From Another Recorder”) or other operations can increase remaining time and available recording capacity.
Filename [DR-M10U_09Navigation.fm] Masterpage:Left+ DR-M10U_09Navigation.fm Page 78 Thursday, March 4, 2004 5:21 PM 78 EN NAVIGATION (cont.) Modify Play List Information Create Play List A Turn on the unit. On the unit Press 1. On the Remote Press DVD 1. ● Turn on the TV and select the AV mode. ● Slide the TV/CABLE/DBS/DVD switch to DVD. A Press x to open the disc tray. B Place a DVD-RAM or DVD-RW (VR mode) disc that was recorded with this unit on the disc tray.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 79 Friday, January 16, 2004 7:38 PM EN To modify the points A Press w e to move the arrow to “CLEAR”, then press ENTER. B Repeat step E – G. H Return to the normal screen. Press NAVIGATION. NOTES: ● There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. ● The title, index and category of the play list can be modified in the same way as “ORIGINAL”.
Filename [DR-M10U_09Navigation.fm] Masterpage:Left+ DR-M10U_01.book Page 80 Friday, January 16, 2004 7:38 PM 80 EN D Set edit-in and edit-out points. A Find the point where you want the moved scene to begin, then press ENTER with the arrow on “IN”. The edit-in time is fixed and the elapsed playing time starts counting again. B Find the point where you want the moved scene to end, then press ENTER with the arrow on “OUT”. The edit-out time is fixed. C Press 4 to start playback.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_09Navigation.fm Page 81 Monday, February 2, 2004 3:30 PM EN Play back play list Perform steps A to C of “Create Play List” (墌 pg. 78) before continuing. A Select the play list(s). Press w e to move the arrow on the index (small still pictures) of the desired play list. ● When you want the plural play lists to be played back continuously, press MEMO after selecting the desired play lists.
Filename [DR-M10U_09Navigation.fm] Masterpage:Left+ DR-M10U_09Navigation.fm Page 82 Friday, March 5, 2004 11:53 AM 82 EN NAVIGATION (cont.) Modify Library Information Scan for Program from library A Turn on the unit. On the unit Press 1. On the Remote Press DVD 1. Program information can be registered in the unit’s memory for up to 1,300 programs. It is helpful when finding out on which disc the desired program is recorded. ● Turn on the TV and select the AV mode.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 83 Friday, January 16, 2004 7:38 PM EN Register disc Delete information A Turn on the unit. A Turn on the unit. On the Remote Press DVD 1. On the Remote Press DVD 1. B Load a disc. B Access the library screen. On the unit Press 1. A Press x to open the disc tray. B Place a disc you want to register on the disc tray. 83 On the unit Press 1. ● For details, refer to “Placing a Disc” (墌 pg. 11).
Filename [DR-M10U_09Navigation.fm] DR-M10U_09Navigation.fm Page 84 Monday, February 2, 2004 3:31 PM 84 EN Masterpage:Left+ NAVIGATION (cont.) Playback with MP3/JPEG Navigation This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily.
Filename [DR-M10U_09Navigation.fm] Masterpage:Right-No-Heading DR-M10U_09Navigation.fm Page 85 Monday, January 26, 2004 11:33 AM EN Locating the desired group and tracks A Load a disc. A Press x to open the disc tray. B Place a disc on the disc tray. ● For details, refer to “Placing a Disc” (墌 pg. 11). C Press x to close the disc tray. B Access the MP3/JPEG Navigation screen. Press NAVIGATION. The MP3/JPEG Navigation screen appears. C Display the item.
Filename [DR-M10U_10Editing.fm] Masterpage:Left0 DR-M10U_10Editing.fm Page 86 Tuesday, January 20, 2004 10:37 AM 86 EN EDITING DV Dubbing CABLE/DBS TV DVD STANDBY/ON TV TV/ MUTING VIDEO TV/CBL/DBS DVD You can dub programs from a camcorder or DV equipment connected to the unit with a DV cable. The unit’s Remote allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
Filename [DR-M10U_10Editing.fm] Masterpage:Right-No-Heading DR-M10U_10Editing.fm Page 87 Thursday, February 5, 2004 7:05 PM EN A Make connections. Connect a camcorder or DV equipment to the DV IN connector on the unit’s front panel. B Prepare the unit for dubbing. 87 E Stop dubbing. Press 8 on the Remote. ● Both the unit and the external DV equipment stop dubbing. NOTES: ● Dubbing copyright guarded programs is not possible.
Filename [DR-M10U_10Editing.fm] Masterpage:Left+ DR-M10U_10Editing.fm Page 88 Monday, January 26, 2004 11:37 AM 88 EN EDITING (cont.) You can use a camcorder as the source player and your unit as the recording deck. Edit From A Camcorder Slide the TV/CABLE/DBS/DVD switch to DVD. A Make connections.
Filename [DR-M10U_10Editing.fm] Masterpage:Right-No-Heading DR-M10U_10Editing.
Filename [DR-M10U_10Editing.fm] Masterpage:Left+ DR-M10U_10Editing.fm Page 90 Thursday, March 4, 2004 5:22 PM 90 EN EDITING (cont.) You can dub selected audio from a DVD or Audio CD disc to a digital audio device. However, it is not possible to dub copy-protected discs. Digital Audio Dubbing Example: Dubbing to an MD A Make connections. Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable. ● Turn on the TV and select the AV mode.
Filename [DR-M10U_10Editing.fm] Masterpage:Right0 DR-M10U_10Editing.fm Page 91 Thursday, March 4, 2004 5:22 PM EN REMOTE On the Remote Remote Control Functions Keep pressing SET UP down during steps A – B. A Change the remote control code. Press the number key “1” for 1, “2” for 2, “3” for 3 or “4” for 4. Remote 1/2/3/4 Code Switching The Remote is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4).
Filename [DR-M10U_10Editing.fm] Masterpage:Left+ DR-M10U_01.book Page 92 Friday, January 16, 2004 7:38 PM 92 EN REMOTE (cont.) TV Multi-Brand Remote Control Your Remote can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled. Before performing the following steps: ● Turn off the TV using its Remote. ● Slide the TV/CABLE/DBS/DVD switch to TV.
Filename [DR-M10U_10Editing.fm] Masterpage:Right-No-Heading DR-M10U_10Editing.fm Page 93 Tuesday, January 20, 2004 10:38 AM EN Cable Box Multi-Brand Remote Control Your Remote can operate the basic functions of your cable box set. In addition to JVC cable boxes, other manufacturer’s cable boxes can also be controlled. Slide the TV/CABLE/DBS/DVD switch to CABLE/DBS.
Filename [DR-M10U_10Editing.fm] Masterpage:Left+ DR-M10U_01.book Page 94 Friday, January 16, 2004 7:38 PM 94 EN REMOTE (cont.) DBS Receiver Multi-Brand Remote Control Your Remote can operate the basic functions of your DBS (Direct Broadcast Satellite) receiver set. In addition to JVC DBS receivers, other manufacturer’s DBS receivers can also be controlled. Slide the TV/CABLE/DBS/DVD switch to CABLE/DBS.
Filename [DR-M10U_10Editing.fm] Masterpage:Right0 DR-M10U_01.book Page 95 Friday, January 16, 2004 7:38 PM EN SYSTEM CONNECTIONS 95 Connecting To A Dolby Digital Decoder or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Left0 DR-M10U_11Subsidiary.fm Page 96 Monday, January 26, 2004 11:38 AM 96 EN SUBSIDIARY SETTINGS Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 97 through 100), then follow the procedure below. Mode Set ● Turn on the unit. ● Turn on the TV and select the AV mode.
Filename [DR-M10U_11Subsidiary.fm] DR-M10U_01.book Page 97 Friday, January 16, 2004 7:38 PM Masterpage:Right-No-Heading EN 97 AUDIO OUTPUT (The boldface settings in the table below indicate the settings at your purchase.) 8 DIGITAL AUDIO OUT DOLBY DIGITAL/PCM STREAM/PCM PCM ONLY 8 ANALOG AUDIO OUT STEREO DOLBY SURROUND 8 D. RANGE CONTROL NORMAL WIDE RANGE TV MODE Set to the appropriate mode according to the type of the device connected to DIGITAL OUT connector.
Filename [DR-M10U_11Subsidiary.fm] DR-M10U_11Subsidiary.fm Page 98 Monday, January 26, 2004 11:40 AM 98 EN Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) VIDEO IN/OUT (The boldface settings in the table below indicate the settings at your purchase.) 8 FRONT AUX F-1 VIDEO S-VIDEO 8 REAR AUX L-1 VIDEO S-VIDEO 8 REAR AUX L-2 VIDEO S-VIDEO Select the appropriate mode depending on the connector (F-1) being used on the front panel. VIDEO: To use the VIDEO input connector on the front panel.
Filename [DR-M10U_11Subsidiary.fm] DR-M10U_11Subsidiary.fm Page 99 Friday, March 5, 2004 11:54 AM Masterpage:Right-No-Heading EN 99 DISPLAY SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SUPERIMPOSE OFF AUTO When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the Remote is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN again.
Filename [DR-M10U_11Subsidiary.fm] DR-M10U_11Subsidiary.fm Page 100 Friday, March 5, 2004 11:54 AM 100 EN Masterpage:Left+ SUBSIDIARY SETTINGS (cont.) OTHERS (The boldface settings in the table below indicate the settings at your purchase.) 8 AUTO TIMER OFF ON When this function is set to “ON”, the timer is automatically engaged when the unit power is turned off, and automatically disengaged when the unit is powered back on.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10U_01.book Page 101 Friday, January 16, 2004 7:38 PM EN 101 Format a DVD-RAM disc Format a disc A Access the Main Menu screen. Press SET UP. Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc. ATTENTION: ● When a disc is formatted, all recordings and data are erased. It is impossible to restore them.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Left+ DR-M10U_01.book Page 102 Friday, January 16, 2004 7:38 PM 102 EN Finalize a disc Finalizing DVD-R/RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players. DVD-RW discs are finalized in the mode that the discs were formatted, enabling playback on compatible DVD players. Titles input in the Library Database DVD Navi are registered as titles in the DVD menu. (墌 pg. 36, 76) ● Turn on the unit.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10U_11Subsidiary.fm Page 103 Thursday, March 4, 2004 5:23 PM EN 103 Scan Mode Set Tray Lock You can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY” (墌 pg. 108). You can lock the disc tray to prohibit the unwanted disc ejection by children. ● Turn on the unit.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Left0 DR-M10U_01.book Page 104 Friday, January 16, 2004 7:38 PM 104 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. GENERAL SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. No power is supplied to the unit. ● The AC power plug is disconnected from the mains.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10U_11Subsidiary.fm Page 105 Friday, March 5, 2004 11:54 AM EN 105 RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The desired program cannot be recorded. ● The channel position does not correspond to that in the receiving area. Set the correct channel position for the receiving broadcast. (墌 pg. 26) 2. Recording and editing cannot be made. ● No disc or a disc not being compatible with the unit is loaded.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Left+ DR-M10U_01.book Page 106 Friday, January 16, 2004 7:38 PM 106 EN TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES MESSAGE DESCRIPTION MEMORY IS FULL NOTHING MORE CAN BE REGISTERED IN THE LIBRARY IF YOU DELETE UNNECESSARY TITLE INFORMATION, YOU CAN THEN REGISTER ADDITIONAL INFORMATION The memory is full for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough. (墌 pg.
Filename [DR-M10U_11Subsidiary.fm] DR-M10U_01.book Page 107 Friday, January 16, 2004 7:38 PM Masterpage:Right 3Column EN MESSAGE 107 DESCRIPTION PRESS [STOP] AGAIN TO STOP RECORDING During Live Memory playback, 8 has been pressed. (墌 pg. 44) TIMER RECORDING COMPLETED Timer recording has finished during Live Memory playback.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Left0 DR-M10U_11Subsidiary.fm Page 108 Monday, February 2, 2004 3:42 PM 108 EN GLOSSARY 8 Aspect ratio 8 Multiangle The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. By recording multiple scenes progressing at the same time in a single title, the user can select view angles. This feature is called the multiangle function.
Filename [DR-M10U_11Subsidiary.fm] Masterpage:Right0 DR-M10U_11Subsidiary.fm Page 109 Monday, February 2, 2004 3:42 PM EN SPECIFICATIONS GENERAL Power requirement : AC 120 Vd, 60 Hz Power consumption Power on : 34 W Power off : 16.2 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (WxHxD) : 435 mm x 70 mm x 346 mm Weight : 4.
Filename [DR-M10U_12IX.fm] Masterpage:Left0 DR-M10U_01.book Page 110 Friday, January 16, 2004 7:38 PM 110 EN LIST OF TERMS A R A-B Repeat Playback ............................................ 49 Adjusting the picture quality .................................. 51 Angle Selection .................................................... 39 Audio Channel Selection ....................................... 40 Audio Language/Sound Selection ........................... 39 AUDIO OUTPUT .............................
Filename [DR-M10U_12IX.fm] Masterpage:Right DR-M10U_12IX.fm Page 111 Thursday, March 4, 2004 5:59 PM EN WARRANTY (Only in U.S.A.) LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. 111 USA ONLY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
Filename [DR-M10U_13Cov4.fm] DR-M10U_13Cov4.fm Page 116 Friday, April 2, 2004 5:23 PM EN FOR SERVICING (Only in U.S.A.) Authorized Service Centers QUALITY SERVICE TOLL FREE: 1 (800) 252-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repairs are necessary, please call 1 (800) 252-5722 for your nearest authorized service location or visit our website at www.JVC.
