Operation Manual

Filename [DR-M10U_08Recording.fm]
Masterpage:Left0
60 EN
Page 60 January 20, 2004 10:20 am
TIMER RECORDING
VCR Plus+
®
Timer
Programing
You can program this unit to timer-record as many as
8 programs.
With the VCR Plus+ system, timer programing is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the Remote to enter the PlusCode number.
A
Load a disc.
A Press x to open the disc tray.
B Place a recordable disc on the disc tray.
● For details, refer to “Placing a Disc” (墌 pg. 11).
C Press x to close the disc tray.
B
Access the VCR Plus+ screen.
Press VCR Plus+.
C
Enter the PlusCode number.
● To clear all entered numbers at a time, press 8.
● If the number you entered is invalid, “PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV
screen. Input a valid PlusCode number.
● If “GUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU
WANT TO RECORD” appears on the TV screen, set Guide
Channel Numbers (
墌 pg. 62) manually.
● When “PROGRAM FULL DELETE UNWANTED TIMER
PROGRAM” appears on the TV screen, you need to cancel
some of the reserved programs. (
墌 pg. 69)
D
Check the program data.
The PlusCode number you entered and the matching
timer-recording information are displayed on the TV
screen. Check if they are correct.
● To cancel this setting, press VCR Plus+ or RETURN.
Before performing the VCR Plus+ Timer Programing:
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Make sure that the unit’s built-in clock is set
properly.
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING
TV/
VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
rtwe
ENTER
8
x
#
0 – 9
RETURN
VCR Plus+
&
Press the number keys to
enter the PlusCode number
of a program you wish to
record, then press ENTER.
● If you have made a mistake,
press & and input the correct
number before you press
ENTER.
IMP
O
RTANT:
Make sure the channel position number you wish to record is
displayed; if not, enter manually the channel position
number you wish to record.
DR-M10U_08Recording.fm Page 60 Tuesday, January 20, 2004 10:24 AM