Operation Manual

Filename [DR-M10U_08Recording.fm]
Masterpage:Left+
62 EN
Page 62 February 2, 2004 3:10 pm
TIMER RECORDING (cont.)
Changing VCR
Plus+
®
Setting
The VCR Plus+ programing system assigns a VCR Plus+
guide channel to the TV channels and the cable
channels. These guide channel numbers are also called
the VCR Plus+ channel codes. Most TV listings have a
section, usually a chart, indicating the guide channel
numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates
correctly, it is necessary to set the VCR Plus+ “Guide
Channel Set” for each station.
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, perform the
following steps to set the correct guide channel number.
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your unit or cable box.
Check your TV listing, or contact your cable supplier for
details.
● Many TV stations can be viewed on cable. Check your TV
listing, or contact your cable supplier for details.
Guide Channel Number Set
A
Access the Main Menu screen.
Press SET UP.
B
Access the “TUNER SET” screen.
C
Enter the Guide Channel number.
● To change the Guide Channel number in 10 increments, press
and hold rt.
● If you receive your channels with a cable box and if you have
properly set your Controller, “CATV CH”appears in place of
“DVD CH”. If not, perform “Changing VCR Plus+
®
Setting”
(
墌 pg. 62).
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING
TV/
VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
rtwe
ENTER
SET UP
A Press we to select
“INITIAL SET UP”, then
press ENTER.
B Press we to select
“TUNER SET”, then press
ENTER.
A Press rt to select
“GUIDE CH SET”, then
press ENTER.
B Press rt to select
“GUIDE CH”, then press
ENTER.
C Press rt to select the
Guide Channel number
for the desired station as
shown in the TV listings.
Then press ENTER.
DR-M10U_08Recording.fm Page 62 Monday, February 2, 2004 3:10 PM