Operation Manual

Filename [DR-M10U_08Recording.fm]
Masterpage:Left+
66 EN
Page 66 January 16, 2004 6:42 pm
TIMER RECORDING (cont.)
On-Disc Timer
Programing
On-Disc Timer Programing is a function used with discs that are
especially intended for a specific program. The disc is then
programed for a program you always watch every day or every
week. Since older programs are automatically overwritten, a
single DVD-RAM/RW (VR mode) disc can be used without
worrying about how much recording capacity remains.
(
墌 pg. 68, “How discs are overwritten”)
You can program each disc to timer-record as many as
8 programs.
To make the disc for On-Disc Timer
Programing
A
Load a disc.
A Press x to open the disc tray.
B Place a recordable disc on the disc tray.
● For details, refer to “Placing a Disc” (墌 pg. 11).
C Press x to close the disc tray.
B
Access Program Check screen.
Press PROG/CHECK.
C
Access the program screen.
When On-Disc Timer Programing is made for the first
time on the disc
Press rt repeatedly to select “DISC TIMER PRGM”,
then press ENTER.
● When some programs are recorded on the disc, a caution
message appears. In such a case, backup the programs as
required, then format the disc before making On-Disc Timer
Programing. (
墌 pg. 101, “Format a disc”)
When On-Disc Timer Programing has already been
made on the disc
Press rt repeatedly to select “NEW TIMER
PROGRAM”, then press ENTER.
D
Enter the recording date.
Press rt repeatedly to set the desired date.
● The current date appears on the TV screen. The date you enter
appears in its place.
E
Enter the recording start time.
Press we to select “START”, then press rt repeatedly
to set the desired start time.
● Each press of rt advances/goes back the start time in 1-min.
increments.
● To advance/go back the start time in 30-min. increments, press
and hold rt.
Before performing On-Disc Timer Programing:
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Make sure that the unit’s built-in clock is set
properly.
A
TTENTION:
● On-Disc Timer Programing is possible only with the disc
for On-Disc Timer Programing.
● If data is recorded on a disc for On-Disc Timer Programing
using a unit from another manufacturer, On-Disc Timer
Programing may no longer function properly.
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING
TV/
VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
rtwe
ENTER
DVD1
PROG/CHECK
x
DR-M10U_01.book Page 66 Friday, January 16, 2004 7:38 PM