Operation Manual

Filename [DR-M10U_08Recording.fm]
Masterpage:Left
70 EN
Page 70 January 20, 2004 10:20 am
When programs overlap each other
If “PROGRAM OVERLAPPED” appears, you have another
program overlapping the program you have just made.
Confirm with the arrow on “OK”, then press PROG/CHECK.
Program Check screen appears and conflicting programs will be
highlighted in pink.
Example: Program 3 (you have just made) and Program 4
overlap each other.
A
Confirm the overlapping programs.
Overlapping programs appear on the TV screen.
NOTE:
If you do not mind this overlap, press PROG/CHECK to finish
the timer program setting. The program with the lower program
number will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute,
the unit will return to the normal screen.
B
Select the desired program to be cancelled or
changed.
Press rt.
To cancel the program
Press &.
● “THE TIMER PROGRAMING SETTING WAS CANCELLED”
appears on the TV screen for about 5 seconds, then the normal
screen resumes.
To change the program setting
Press ENTER.
C
Change the program setting.
● Refer to steps D – J in “Manual Timer Programing”
(
墌 pg. 64).
D
Check if the conflict has been settled.
Press PROG/CHECK.
● Program check screen appears.
E
Engage the unit’s timer mode.
● Refer to step F in “Check, cancel and change programs”
(
墌 pg. 69).
NOTE:
When any overlaps remain after deletion and modification of
programs, Program Check screen remains showing the
conflicting programs. In such a case, repeat the procedure above
until the conflict is solved.
CABLE/DBS
DVDTV
DVD
CH
TIMER REC LINK PROG/CHECK VCR Plus+
NEXTPREVIOUS
PAUSEREC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOWSLOW PLAY/SELECT
STOP/
CLEAR
NAVIGATIONTOP MENU
RETURN
ENTER
MENU
TV/CBL/DBS
STANDBY/ON
TV
MUTING
TV/
VIDEO
TV VOLUME
ABC
JKLGHI MNO
TUVPQRS WXYZ
AUXCANCEL MEMO/MARK
DBS
DEF
PROG/CHECK
rt
ENTER
&
DR-M10U_08Recording.fm Page 70 Tuesday, January 20, 2004 10:26 AM