Operation Manual

Filename [DR-M10U_11Subsidiary.fm]
Masterpage:Left+
98 EN
Page 98 January 26, 2004 11:40 am
SUBSIDIARY SETTINGS (cont.)
VIDEO IN/OUT
(The boldface settings in the table below indicate the settings at your purchase.)
RECORDING SET
(The boldface settings in the table below indicate the settings at your purchase.)
8 FRONT AUX F-1
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector (F-1) being used on
the front panel.
VIDEO: To use the VIDEO input connector on the front panel.
S-VIDEO: To use the S-VIDEO input connector on the front panel.
8 REAR AUX L-1
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector (L-1) being used on
the rear panel.
VIDEO: To use the VIDEO input connector on the rear panel.
S-VIDEO: To use the S-VIDEO input connector on the rear panel.
8 REAR AUX L-2
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector (L-2) being used on
the rear panel.
VIDEO: To use the VIDEO input connector on the rear panel.
S-VIDEO: To use the S-VIDEO input connector on the rear panel.
8 SAVE AS LIBRARY
OFF
ON
When this function is set to “ON”, the recording information is automatically
stored in the library. For details, refer to “Modify Library Information”
(墌 pg. 82).
8 XP MODE REC AUDIO
DOLBY DIGITAL
LINEAR PCM
You can select the audio format when you record a program in XP mode. When
this function is set to “LINEAR PCM”, you can obtain a high-quality audio
sound.
DOLBY DIGITAL:
To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.
8 2ND AUDIO RECORD
ON
OFF
● When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on L/R tracks. The main
audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/R tracks.
● When this function is set to “OFF”, the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the unit;
● The “MONO” indicator appears on the screen for about 5 seconds if the program is a
monoral broadcast.
● The “STEREO” indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
● Both “STEREO” and “SAP” indicators appear when a stereo program is accompanied
by SAP sound.
● Both “MONO” and “SAP” indicators appear when the main audio on the monoral
broadcast is accompanied by SAP sound.
DR-M10U_11Subsidiary.fm Page 98 Monday, January 26, 2004 11:40 AM