Manual

Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
i}j_j'j r_t._ Ls_Rrt_l l_j
On the front panel ONLY:
I. Press FM/AM to select the band. _....
The MULTI CURSOR A / V / <1 / t> _=======%_.<_
%/
buttons can be now used for operating the
tuner.
• Each time you press the button, the band alternates between
FM and AM.
!... _ i..., .." h=. !'¢1 '_' .,,P
, i i ii i ,,
I I I ',,.' I :: ...........
lOP lk 1Qk VDI&ItE
2. Press MULTI CURSOR/x / v
repeatedly until "- TUNING +"
appears on the display.
- ru"" "''" ..i..
i,,i i i,,i i,.i
i i _1 i...i .
T
3. Press MULTI CURSOR <a / _>
until you find the frequency you
want.
• Pressing <1decreases the frequency.
• Pressing t> increases the fi-equency.
Notes:
• When you hold MULT! CURSOR <_/_> in step 3, the frequency
keeps changing until a station is tuned in.
• Whenastationofsufficientsignalstrengthistunedin, theTUNED
indicator lights up on the display
When an FM stereo program is received, the STEREO indicator
also lights up.
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Betbre you start, remember...
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
On the front panel ONLY:
1. Tune in the station you want to preset (see
"Tuning in Stations Manually").
If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the FM
Reception Mode" on page 17.
i i,,,i i i ,, k,, i,,,i i i
F ['[ 1--1 I :: ", i i i i "[ :Z:
lEO Ik lat_ "_LUUEL_ _
MEMORY
2. Press MEMORY.
IE3_ .._-,._ r,.= _":' _ "_"' '7
LINE_RFO_4 _+_=,,,,,,,_ i i "--" 11 I'IPI ....
25
,w Ik 1_- _JaE
"CH*' appears and the channel nt mber position stairs flashing
on the display for about 5 seconds.
.
Press MULTI CURSOR < / D to /_[_//
select a channel number while the I_ I_1 _ I
channel number position is IL2 qlCL
flashing. "_/_
I[_;N_ _,.., _...., _" _-_.,, ,
_ I P" Ill :'-: ." --'i Ill ["1 ": i"
_ _* _ " ®_i.' -
..............
I _ "_LUME
.
Note:
m
You can use the 10 keys on the remote control to select the preset
numbe_ When using the 10 keys, be sure that they are activated
for the tuner, not for the CD and others. (See page 29.)
Press MEMORY again while the MEMORY
selected channel number is _===_"5
flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5. Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
16