Manual

4. Adjust the speaker output levels. - CENTER÷
_1_ adjust the center speaker level, press
CENTER/+ (from 10 dB to +10 dB).
_1_ adjust the left rear speaker level, press
REAR,L/+ (from 10 dB to +10 dB).
- REAR*L +
_l_ adjust the right rear speaker level, press _, _-,- ,-,,'_
REAR,R /+ (from 10 dB to +10dB). _ _
- REAR*R +
TEST
5. Press TEST again to stop the test tone.
6. Press EFFECT to select an effect EFFECT
level you want.
Each time you press the button, the effect
--w../
level changes as follows:
As the number increases, JVC Theater Surround becomes
stronger.
On the front Daneh
You can also use the buttons on the fi-ont panel to adiust the
Surround modes. However, no test tone is available when using the
buttons on the front panel. So, make adjustments while listening to
the sound of the source played back,
1. Press DSP MODE repeatedly until
"THEATER" appears on the
display.
The [1111PRO LOGICand DSP indicators
also light up on the display.
2. Adjust the speaker output levels.
1) Press ADJ UST repeatedly until one of
the thllowing indications appears on
the display.
"CENTER LEVEL":
_1_ adjust the center speaker level.
"REAR L LEVEL":
_1_ adjust the left rear speaker level,
"REAR R LEVEL":
_1_ adjust the right rear speaker level,
Once you have pressed ADJUST,
MUUfl CURSOR A / V can be also
used for selecting the speaker.
2) Press MULTI CURSOR <1 / b> to
adjust the selected speaker output
level (from -10 dB to +10 dB).
3) Repeat 1) and 2) to adjust the other
speaker output levels.
ADJUST
4. Adjust the effect level.
1) Press ADJ UST repeatedly until "DSP
EFI_ECT" appears on the display.
Once you have pressed ADJUST,
MUUfI CURSOR A / V also can be
used for selecting "DSP EFFECT."
The display changes to show the
current setting.
2) Press MULTI CURSOR <1 / E> to
select the effect level.
As you press it, the effect level changes
as follows:
ADJUST
_uL_lcu_oR
DSP EFFECT1*'-_DSPEFFECT2 *'-_DSP EFFECT37
J
,.DSPEFFECT5*._,.DSP EFFECT4,
As the number increases, JVC Theater Surround becomes
stronger.
24