Manual

Video component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
IMPORTANT:
This receiver is equipped with both the composite video and S-video
input terminals for the DVD player connection.
You do not have to connect both the composite video and S-video
terminals.
However', remember that the video signals from the composite
video input terminal are output only through the composite
video output terminals, while the ones from the S-video input
terminal are output only through the S-video output terminal.
Therefore, if your" DVD player is connected to the receiver only
through the S-video input terminaI, you cannot record the picture
from the DVD player on the VCR.
In addition, if the TV and the DVD pIayer are connected to the
receiver through the different video terminals, you cannot view the
playback picture from the DVD player on the TV.
I DVDplayer
"IVand/or DBStuner
When connecting the TV to the TV SOUND/DBS jacks, DO NOT
connect the TV's v dee output to the v dee nput term na .
To S-video input (for better
Connect the TV to the MONITOR
OUT jack to view the playback
picture from the other connected
video components.
IA} To front left/right channel audio output (or to audio mixed
output if necessary)
To composite video output
To S-video output (for better playback picture quality)
VCR
VCR
[]
Inl IIIIII
IAI To left/right channel audio output
To left/right channel audio input
To composite video output
To composite video input
6
To audio
output
[]
DBS tuner
To composite video output
Note:
When connecting the DBS tuner to the TVSOUND/DBS jacks,
change the source name, which will be shown on the display when
selected as the source, to "DBS."See page ! 1 for details.
If your audio components have an AV COMPU LINK terminal
See also page 27 for detailed information about the connection and
the AV COMPU LINK remote control system.