Manual

Front Panel
_ I ..,.,"_]"_XQiiITI'TI1T_j
1 Press FM or AM (FM/AM) to select the band.
The last received station of the selected band is tuned in.
FM/AM
On the front panel From the remote control
B9.5 MHZ25
Ex.: When the FM band is selected.
2 Press FM/AM TUNING A/V [_te]
(up/down) repeatedly until you find
the frequency you want.
_AM TUNING
• Pressing FM/AM TUNING • (up) @
increases the frequency.
• Pressing FM/AM 'I UNING • (down) ___
decreases the frequency.
%,9 -_/
Notes:
• When you press and hold FM/AM TUNING A/V (up/down) forfew
seconds in step 2, the frequency keeps changing until a station is
tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the displa_z
• When an FM stereo program is received, the STEREO indicator
also lights up.
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Belbre you start, remember...
There is atime limit in doing the folk)wing steps, lfthe setting is
canceled before you finish, start from step 2 again.
1 Tune in the station you want to preset
(see "Tuning in Stations" on the left).
• If you want to store the FM reception mode for each preset
st[]ion, select the FM reception mode. See "Selecting the FM
Reception Mode" on page 17.
E39.5 MHZ25
2 Press MEMORY. ......
The "CHJ' indicator lights up and the channel _-_"/N
number position starts flashing on the display for
about 5 seconds.
B].5 ,"IHZ 25
3 Press FM/AM PRESET A/V (up/ ..........
down) to select a channel number @
while the channel number position @_")._/
is flashing.
o. _'it B9.5 MHZ25
16