Manual

ManualsBrandsJVC ManualsHome Theater SystemOfficial JVC home theater

• DAP (Digital Acoustic Processor) modes

DAP modes have been designed to create important acoustic

surround elements.

The sound heard in a live club, dance club, hall or pavilion consists

of direct sound and indirect sound_arly reflections and reflections

from behind. Direct sounds reach the lis/ener direcdy without any

reflection. On the other hand, indirect sounds are delayed by the

distances of the ceiling and walls (see the diagram below).

These indirect sounds are important elements of the acoustic

surround effects. The DAP mode can reproduce a realistic sound

field by adding these indirect sounds.

DAP modes can be used when the front and rear speakers are

connected to this receiver (without respect to the center speaker

connection: no sound comes out of the center speaker even if it is

connected).

The following DAP modes are provided with this receiver:

LIVE CLUB : Gives the feeling of a live music club with a low

ceiling.

DANCE CLUB : Gives a throbbing bass beat.

HALL : Gives clear vocal and the feeling of a concert

hall.

PAVILION : Gives the spacious feeling of a pavilion with a

high ceiling.

These DAP modes can be used to add the acoustic surround eft_cts

while reproducing 2 channel slereo soflware_ither analog or

digital except Dolby Digital and DTS Digital Surmund_nd can

give you a real "being there" feeling.

• When one of the DAP modes is selected, the DSP indicator lights

up on the display.

Reflections from behind

Early reflections

• All Channel Stereo

'Ibis mode can reproduce a larger stereo sound field using all the

connecled (and activated) speakers.

All Channel Stereo can be used when the front and rear

speakers are connected to this receiver without respect to the

center speaker connection.

If the center speaker is connecled and activaled, the same phase of

the front left and right signals are output through the cemer speaker.

All Channel Stereo can be used while reproducing 2 channel s/ereo

software, either analog or digital except Dolby Digital and DTS

Digital Surround.

• When All Channel Stereo is selected, the DSP indicator lights up

on the display.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii !! :i :i ! i i :! ! ! i ii!i

Sound reproduced from All Channel _tereo

DVD MULTI Playback Mode

This receiver provides the DVD MULTI Playback Mode for

reproducing the analog discrele 5.1 channel output mode of the

DVD player or other equipment.

You can adjust speaker output levels while playing back a video

soflware such as a DVD using the analog discrete 5.1 channel

output mode.

• For connecting analog discrete oulput jacks, see page 7.

• Fk_rdetails on the DVD MULTI Playback Mode, see page 24.

Note:

When you select "DVD MULTI" as the source to play, Surround mode

is canceled, and the SURROUND ON/OFF and SURROUND MODE

buttons do not work.

Mode SURROUND DOLBV DTS PLII PLI[ LIVE DANCE ALL OH

HALL PAVILION

Signals OFF (stereo) DIGITAL SURROUND MOVIE MUSIC CLUB CLUB STEREO

(Multichannet

(2 channel)

DTS Digital

(Multichannet

DTS Digital

(2 channel)