Manual
Once you have adjusted the DAP modes and All Channel Stereo, the
ac/justment is memorized for each source.
• You cannot use the DAP modes and All Channel Stereo if no rear
speakers are connected and activated.
• You cannot at/just the effect level for All Channel Stereo.
Fromtheremotecontrol:
It will be convenient for you to use the remote control for
ac/justments, since you can make adjustments from your listening
point.
I Start playing 2 channel software--either analog
or Linear PCM--and select the source.
2
3
Press SURROUND ON/OFF to activate
Surround mode. s
When Surround mode turns on, the last selected Surround mode
will be activated.
• Each time you press the button, Surround mode turns on and
off alternalely.
Press SURROUND MODE repeatedly suR_0u_0
until one of the DAP modes--"LIVE
CLUB," "DANCE CLUB," "HALL,"
"PAVILION"--or "ALL CH STEREO"
appears on the display.
The DSP indica/or also lights up on the display.
If you like to adjust sound, go to step 4.
4[ Press SOUND.
10 keys are activated for sound adjustments.
5
Adjust the speakers output levels - REARL+
(-10 to +10). @
• To ac[just the left rear speaker level, press "x_
REAR•L +/ . - UEAR.U+
• TO ac[just the right rear speaker level, press
REAR.R +/ .
v./
For "ALL CH STERE()" only:
• To at/just the center speaker level, press --CENTER+
CENTER +_.
For DAP modes only: _/>
Press EFFECT to select the effect level _o+
(1 to 5) you want.
• Each time you press the button, the effect
%./
level changes as folk)ws:
F EFFECT -- EFFECTg-- EFFECT'--I
EFFECT 5 _ EFFECT 4 ÷--
As the number increases, the selected mode becomes stronger
(nor nally set it to ' EFFECT 3").
Onthefrontpanel:
Start playing 2 channel software--either analog
or Linear PCM--and select the source.
2 Press SURROUND ON/OFF to _o..oo,,oo_
activate Surround mode.
3
When Surround mode turns on, the last selected Surround mode
will be activated.
• Each time you press the button, Surround mode turns on and off
alternmely.
Press SURROUND MODE
repeatedly until one of the DAP
modes--"LIVE CLUB," "DANCE
CLUB," "HALL," "PAVILION,"--
or "ALL CH STEREO" appears on the display.
The DSP indicator also lights up on the display.
If you like to adjust sound, go to step 4.
/
g
g_
_--%
I
SURROUND_ODE CI
o
4:g
g_
g2..
4 Adjust the speaker output levels.
I) Press ADJUST repeatedly until one
of the following indications (with the
current setting)* appears on the
display.
REAR R : To at/just the right rear speaker output level
( I0 to +lO).
* "0" is the initial setting. [f you have ah-eady changed the
setting, another number (level) will be shown.
2) Press CONTROL UP A_OWN • _#_%.
to adjust the selected speaker
output levels, q_
3) Repeat steps I) and 2) to adjust the
other speaker levels.
Only for DAP modes:
Adjust the DSP effect level.
I) Press ADJUST repeatedly until ......
"EFFECT" (with the current _")
setting)* appears on the display.
*"EFFECT 3" is the initial setting. If you have already
changed the setting, another setting will be shown.
2) Press CONTROL UP A_OWN • _#_%.
to select the effect level (1 to 5) you
want. _>
• Each time you press the button, the etfect
level changes as follows:
_._ECT 1 "_" EFFECT 2 "*'_" EFFECT 3 '_"]
EFFECT 5 _ EFFECT 4 *-
As the number increases, the selected mode becomes
stronger (normally set it to "EFla_CT 3").
Note:
You cannot select any DAP mode and All Channel Stereo for Dolby
Digital and DTS Digital Surround.
TocancelDAPmodesandAllChannelStereo
Press SURROUND ON/OFla' so that "SURROUND Olaf '' appears on
the display. The DSP indicator goes off.
23