Manual

Cassette deck
Before starting operations described below, make sure that you have
changed the source name correctly. See page 8.
Afler pressing TAPE/CDR, you can use following buttons for
cassette deck operations:
FF : Fast wind the tape fi'om le[_ to right.
: Stol? playback or recording.
REC PAUSE : Press this button to enter recording pause.
Press this button and then I_ to strut recording.
IMPORTANT:
To operate JVC's video components using this remote control:
• Some JVC's VCRs can accept two types of the control signals--
remote code "A" and "B." Before using this remote control, make
sure that the remote control code of the VCR connected to the VCR
jacks is set to code '%2
• Aim the remote control directly at the remote sensor on each
component, not on the receiver.
You can always perform following operations:
TA !
After pressing DVD or DVD MUUFI, you can use following buttons
for DVD player operations:
_1 : Return to the beginning of the current
(or previous) track.
• : Stop playback.
: .y To :
DVD menu operations
After pressing DVD or DVD MULTI, you can
use following buttons for DVD menu
operations:
: Select all item on the menu screen.
/
O
Igl
=%
I=
o
=.
o
o
o
I
VCR
You can always perform following operations:
VCR CH +/- :Change the TV channels on the VCR.
11/
You can always perform following operations:
TV/VIDEO : Change the input mode (TV tuner and video
input).
Afler pressing VCR (source selecting button), you can use following
buttons for VCR operations:
FF : Fast wind a tape.
TV CH +/- : Change the channels.
After pressing TV SOUND, you can use following buttons for TV
operations:
• : Stop playback or recording.
RETURN (10) :Function as the RETURN button.
REC PAUSE : Press this button to enter recording pause.
Press this button and then 1_ to stair recording.
29