Manual

Afler connecting the front, center, rear speakers and/or a subwoofer,
set the speaker setting information properly to obtain the best
possible surround effect. For details, see pages 12 to 14.
CAUTION:
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
Connecting the front, center and rear speakers
l 2
(il
3
For each speaker, connect the (+) and ( ) terminals on the rear panel
to the (+) and (-) terminals marked on the speakers.
! Cut, twist and remove the insulation at the end of
each speaker cord.
:2 Open the terminal (d_J),r'_then insert the speaker
cord (_2_).
3 Close the terminal.
Speaker layout diagram
"NO" fbr the subwoofer, "LARGE" for the front speakers,
and "SMALL" fbr the center and rear speakers are initial
settings. To get best possible sound, change the subwoofer
and speaker settings to fit your listening conditions (See
pages 12 and 13).
[Subwoofer]
"&
] I Right rear
Left rear •
speaker speaker
/
gl
Connecting the subwoofer speaker
By connecting a powered subwoofer, you can enhance the bass or
reproduce
the original LIE signals recoMed in the digital software.
Powered subwoofer
SUBWOOFER
OU1
Connect the input.jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs (not supplied).
• Ret%r also to the manual supplied with your subwoot_r.
To left
front speaker
To center speaker
To right front speaker
To right rear speaker
To left
rear speaker
5