Manual

Basic operations
Basic playback
This section describes basic operations for playback of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and
JPEG disc playback, see the separate chapter on and after pages 39 and 42.
OPEN/CLOSE _
C3_3 C3_ _
C3L3 CL_ CL)
22j_S_ _ dS]
_ _ dj°_i!5
c_ c_ c_j
_ l|
DIsc tray _AOPEN/CLOSE
1 Press _A OPEN/CLOSEto open the disc tray.
2 Place a disc in the tray.
3 Press_A0PEN/CLOSEto closethe disc tray.
The unit reads the disc information and the
opening display appears on the TV screen.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, Video CD or SVCD disc,
a menu display may be automatically shown on the
-IV screen. From a menu, you can select a desired item
to be played back by following the procedure below.
With the label side up
• To insert an 8-cm disc,
place it in the inner
recess.
(for DVD VIDEO)
1 Use A/v/_I/I_ to select a desired item.
2 Press ENTER.
The unit starts playback of the selected item.
(for Video CD/SVCD)
I Use the numeric buttons to select a desired item.
The unit starts playback of the selected item.
NOTES
• Do not load a non-playable disc. For details about playable and non-playable disc types, see page 4.
• When loading a disc on the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, or the disc may not be removed from the unit.
• Do not use any stabilizer when playing back a disc.
• With some DVD VIDEO discs, the unit starts playback automatically after inserting the disc.
• If you insert a DVD VIDEO disc whose region code does not match the unit, "REGION CODE ERROR!" is shown in the opening
display. For detail about the region code, see page 4.
14