Operation Manual

1515
Sync Function
Settings for the synchronization with signals.
Item To do Setting value
No Sync Action Select the screen status when no signal is coming in. Off, Standby, Power Save
(power save mode),
Gray Back (gray screen)
Delay Time Select the period until the screen status changes as selected in “No Sync Action” after signals
stop coming in.
30s, 5min, 15min
Low Latency Activates/deactivates the function to shorten the time taken to display the picture (low
latency function).
Off, On
• If the picture is not displayed steadily while “On” is selected, select “Off.”
• While “On” is selected, the displayed picture may become unstable when an operation
using buttons on the front panel or the menu is performed, or when the signal format
changes.
l
When setting “No Sync Action” to “Gray Back,” the screen color changes to gray and the power consumption of the backlight is saved by half.
Selecting “Power Save” (power save mode) saves more power consumption by turning off the backlight.
No Operation Action Setting values: Off, On
Setting of the function for turning the unit off (standby) automatically when no operations are made for more than 4 hours.
Off: Does not turn off automatically
On: Turns off automatically
l When the function is turned On, a warning message will be displayed about 3 minutes before turning off automatically.
When you turn on the unit with the function turned On, a message notifying that the setting is turned on will be displayed for about 30
seconds.
Closed Caption*
1,
*
2
Settings for Closed Caption functions
Item To do Setting value
Closed Caption Activate/deactivate the closed caption. Off, On
Data Format Select the data format of closed caption. 708, 608ANC, 608(708),
608VBI*
3
Decode channel Selects the type of closed caption. CC1, CC2, CC3, CC4, Text1,
Text2, Text3, Text4
Service Block Selects the type of service block. Service1, Service2, Service3,
Service4, Service5
• Closed Caption does not work for all video formats.
• Closed Caption does not work for the COMPO./HDMI input.
• Closed Caption does not work for the SDI input formats 1035/60i, 1035/59.94i, 1080/60p, 1080/59.94p, 1080/50p and 3G SDI Level A.
• Depending on signal format, there maybe a case that the closed captions are not displayed properly.
• When using the 1:1 mode, closed captions may not be displayed properly.
*
1
North America only.
*
2
Memorized for each input.
*
3
Displayed only when SD SDI signal is input.
Set-Up Menu
Function Setting
Settings for the sub menu display, tally lamp, button lamp intensity, LCD Saver and FUNCTION button.
Item To do Setting value
sub menu Position Select the contents and displaying position of “sub menu.” Lower1, Upper1, Lower2,
Upper2
Lower1 : Displays the current setting and adjustment bar at the lower part of the screen.
Upper1 : Displays the current setting and adjustment bar at the upper part of the screen.
Lower2 : Displays the current setting at the lower part of the screen.
Upper2 : Displays the current setting at the upper part of the screen.
• The adjustment bar is not displayed for some items.
Tally Setting
Set the color and mode of the tally lamp using external control.
Tally Type
Normal
Half
:
:
Light up the entire tally.
Light up the left and right halves of the tally individually.
Normal, Half
Tally Color
Set the tally color when “Tally Type” is set to “Normal”. Green, Red
Dimmer Select the intensity of the button lamps. Normal, Dark
Component Phase Deactivates the function of PHASE adjustment (Picture adjustment knob and “Picture Sub
Adjust” in Set-Up Menu) except when an NTSC signal comes in (+ on page 16).
Enable, Disable
Color Gamut Select the color reproduction range. ITU-709, User, Adobe RGB
DT-V24G2_EN.indb 15 2016/07/27 16:37:14