Operation Manual

2525
Specifications
General
Model name DT-V24G2 DT-V21G2 DT-V17G2 DT-V17G25
Type Multi format LCD monitor
Screen size Type 24 wide format Type 21.5 wide format Type 16.5 wide format
Aspect ratio 16:10 16:9
Horizontal/vertical frequency
(computer signal)
H: 31.467 kHz – 75.000 kHz
V: 49.990 Hz – 75.062 Hz
* Some signals within this frequency range may not be displayed (“Out of range” is displayed).
Compliant video signal format
+ “Available signals” on page 27
Format 3G SDI: SMPTE424M/SMPTE425M
DUAL LINK HD SDI: SMPTE372M
HD SDI: BTA S-004C, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output Internal speaker: 1.0 W + 1.0 W
Operating conditions Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements AC 120 V / AC 220 V – 240 V,
50 Hz/60 Hz
AC 120 V / AC 220 V – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V AC 120 V / AC 220 V – 240 V,
50 Hz/60 Hz
Rated current North
America
0.72 A (AC 120 V) 0.61 A (AC 120 V)
5.0 A (DC 12 V – 17 V)
0.47 A (AC 120 V)
3.7 A (DC 12 V – 17 V)
0.55 A (AC 120 V)
Europe 0.42 A (AC 220 V – 240 V) 0.39 A (AC 220 V – 240 V)
5.0 A (DC 12 V – 17 V)
0.30 A (AC 220 V – 240 V)
3.7 A (DC 12 V – 17 V)
0.33 A (AC 220 V – 240 V)
External dimensions
(excluding
protruding parts)
with the
stand
Width: 564 mm (22 1/4˝) Width: 515 mm (20 5/16˝) Width: 430 mm (16 15/16˝)
Height: 448.6 mm
(17 11/16˝) Height: 387.6 mm (15 5/16˝) Height: 349.6 mm (13 13/16˝)
Depth: 243 mm (9 5/8˝) Depth: 212.9 mm (8 7/16˝) Depth: 212.9 mm (8 7/16˝)
without
the stand
Width: 564 mm (22 1/4˝) Width: 515 mm (20 5/16˝) Width: 430 mm (16 15/16˝)
Height: 408 mm (16 1/8˝) Height: 347 mm (13 11/16˝) Height: 309 mm (12 3/16˝)
Depth: 98.7 mm (3 15/16˝) Depth: 99.8 mm (3 15/16˝) Depth: 102 mm (4 1/16˝)
Weight 10.6 kg (23.4 lbs)
(with the stand)
7.7 kg (17 lbs)
(without the stand)
8.6 kg (19 lbs)
(with the stand)
6.2 kg (13.7 lbs)
(without the stand)
8.2 kg (18.1 lbs)
(with the stand)
5.8 kg (12.8 lbs)
(without the stand)
8.3 kg (18.3 lbs)
(with the stand)
5.9 kg (13 lbs)
(without the stand)
Accessories North
America
AC power cord x 1, Power cord holder x 1, Screw x 2, Instruction manual x 1, Core filter x 1
Europe AC power cord x 2, Power cord holder x 1, Screw x 2, Instruction manual x 1, CD-ROM (INSTRUCTIONS PDF) x 1
LCD panel
Type 24˝ wide, active matrix TFT 21˝ wide, active matrix TFT 17˝ wide, active matrix TFT
Effective screen size Width: 518.4 mm (20 7/16˝)
Height: 324 mm (12 13/16˝)
Diagonal: 611.3 mm (24 1/8˝)
Width: 476.1 mm (18 3/4˝)
Height: 267.8 mm (10 9/16˝)
Diagonal: 546.2 mm (21 9/16˝)
Width: 365.8 mm (14 7/16˝)
Height: 205.7 mm (8 1/8˝)
Diagonal: 419.7 mm (16 9/16˝)
Number of pixels displayed 1920 x 1200 1920 x 1080
Number of colors displayed 107.3 billion 16.77 million 107.3 billion
Viewing angle (TYP.) 178° (Horizontally), 178° (Vertically)
Brightness (TYP.) 400 cd/m
2
300 cd/m
2
450 cd/m
2
Contrast ratio (TYP.) 1500:1
Input/output terminals
Video VIDEO Input/output of composite signal: 1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-connected
(auto termination).
HDMI
HDMI signal input (compatible with HDCP) : HDMI connector x 1
COMPO.
(Y,PB/B-Y,PR/R-Y)
Analog Component signal input: 1 Line
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω
3G/HD/SD SDI (IN 1) Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals):
auto detection, 2 line, BNC connector x 2
3G/HD/SD SDI (IN 2)
3G/HD/SD SDI (OUT1) Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line, BNC connector x 1
3G/HD/SD SDI
(OUT2: SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals): 1 line switched out, BNC connector x 1
Audio AUDIO ASSIGN (IN1) Analog audio signal input: 2 line, RCA connector x 2, Stereo mini Jack x1, 500 mV (rms), high impedance
AUDIO ASSIGN (IN 2)
AUDIO ASSIGN (MONITOR OUT) Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms)
External
control
REMOTE (MAKE/TRIGGER)
+ “Using the Make/Trigger system” on page 20
REMOTE (RS-485)
+ “Using the serial communication” on page 21
REMOTE (RS-232C)
DT-V24G2_EN.indb 25 2016/07/27 16:37:19