User Manual

Rear view
DC 12V IN: Connect with DC12V 4-pin XLR power adapter.
TALLY Light: Red, Green and Yellow 3-color TALLY indicator
Battery mount:
Connect with JVC battery BN-VF823 or SWIT battery BN-S8823 to power the monitor.
CVBS IN: Composite video input (BNC connector)
SDI-LOOP: 3G/HD/SD-SDI loop through output (BNC connector)
SDI-IN: 3G/HD/SD-SDI input (BNC connector)
HDMI-LOOP: HDMI loop through output
HDMI-IN: HDMI input
TALLY controlling port (RS-232): terminal description is as follows:
The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting.
The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
The YELLOW light is on when connecting the terminal “Y” with “GND”, and goes out when disconnecting.
AUDIO L: Stereo audio left channel input (RCA connector)
AUDIO R: Stereo audio right channel input (RCA connector)
CVBS-LOOP: Composite video loop through output (BNC connector)
Input formats
Terminal 1 2 3 4 5 6 7 8 9
Description Y G R GND GND GND
Input Supported formats
CVBS PAL / NTSC
480I / 576I / 480P / 576P
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
HDMI
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
SMPTE-425M 1080p (60 / 59.94 / 50)
1080i (60 / 59.94 / 50)
SMPTE-274M
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M 720p (60 / 59.94 / 50)
SMPTE-125M 480i (59.94)
SDI
ITU-R BT.656 576i (50)