User Manual

7
·OSD
⑴ Timecode (SDI)
Under SDI input, it can display Timecode. If no Timecode information is detected, it will be
displayed as “TC: UNLOCKED”.
User can set function keys F1 - F4 as “Timecode” to turn on or off this function
⑵ UMD
Display the source title. Set up under “UMD” submenu.
⑶ AFD (SDI)
User can set function keys F1 - F4 as “AFD” to turn on or off this function. If no relevant
information is detected, it will be displayed as “AFD: UNLOCKED”.
⑷ Soft TALLY
When connected with TALLY control devices and set TALLY port in GPI, the screen will display
soft TALLY signal, flashing in Red, Green or Yellow. Refer to “Main Menu – 5. GPI”
⑸ Audio meters
Monitor the audio information. User can set function Keys F1 - F4 as “Audio” to turn on or off this
function. The audio meter position, audio channels and blending, etc can be set under “Audio”
submenu.
⑹ Histogram
User can set function Keys F1 - F4 as “Histogram” to turn on or off this function.
⑺ Vector
User can set function Keys F1 - F4 or GPI pins as “Vector” to turn on or off this function.
The Vector position, Vector color and Vector blending, etc. can be set under “Vector” submenu.
⑻ Waveform
User can set function Keys F1 - F4 or GPI pins as “Waveform” to turn on or off this function.
The Waveform position, type, color and blending, etc can be set under “Waveform” submenu.