User manual

E-52
Using the unit in a non-linear system
This is a system that captures the content of the source tape on a non-linear editing system
and records the non-linear edited contents onto the main unit.
EDIT – Using the unit in an editing system – (continued)
Connection
DV IN/OUT
AUDIO VIDEO
LINE
Y/C
CH 1/3 CH 2/4
INOUT
REMOTE
SERIAL
9PIN
NTSC/PAL
NTSC PAL
DC12V
AUDIO
OUT
DV
Terminal
VIDEO OUT
Video
IEEE1394 (video, audio, control)
Audio
Remote controller
Non-linear editing system
Setting this unit
 The REMOTE SEL. switch on the front
panel can be set at any position.
 Set the REMOTE menu.
• REMOTE:
Set it to “ON”.
• REMOTE FF/REW MODE:
Use this menu item to select the action to be
executed when an FF or REW command is re-
ceived during playback (FF/REW or search).
If the search and locate function does not work
well, set it to SEARCH.
• CONTROLLER TYPE (REMOTE 2/2 menu):
Set it to “TYPE 1”.
Memo
If an error occurs to the time code of BR-
DV3000 when the tape is advanced /re-
versed by 1 frame by the non-linear edit sys-
tem, please set the STILL mode of the main
unit to "FRAME".