LT-32/26D50BJ/SJ / LCT1703-001B-U / All Cover LT-32&26D50BJSJ_Eng.book Page 1 Thursday, October 7, 2004 4:42 PM LT-32D50BJ LT-26D50BJ LT-32D50SJ LT-26D50SJ DynaPix LCD IDTV with D.I.S.T.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 2 Thursday, October 7, 2004 4:42 PM Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 3 Thursday, October 7, 2004 4:42 PM Thank you for buying this JVC LCD flat television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: WHEN PUTTING THE TV DOWN, DO SO SLOWLY AND CAREFULLY ONTO A FLAT SURFACE.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 4 Thursday, October 7, 2004 4:42 PM Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. • Avoid damaging the AC plug and power cord.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 5 Thursday, October 7, 2004 4:42 PM D.I.S.T. demonstration To start the D.I.S.T. demonstration: Press the H button to display the menu bar. Then press the yellow button. A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen. To quit the D.I.S.T. demonstration: Press the yellow button, TV/DTV button, p p buttons or any of the number buttons.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 6 Thursday, October 7, 2004 4:42 PM CONTENTS Setting up your TV ...................................7 Installation.................................................. 7 Using the stand .......................................... 7 Removing the terminal covers ................... 8 Connecting the aerial ................................. 9 Connecting the power cord to the AC outlet.....................................................
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 7 Thursday, October 7, 2004 4:42 PM Setting up your TV • When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV. • Make sure that the TV is installed on the wall by a skilled installer. Installation Cautions for installation • Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 8 Thursday, October 7, 2004 4:42 PM Setting up your TV Cable holder A cable holder which is used to keep the connection cables tidy is attached to the back of the stand. Gently squeeze the left and right of the cable holder and pull it to remove it from the stand. After putting the cables in the cable holder, attach it to the back of the stand again.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 9 Thursday, October 7, 2004 4:42 PM Setting up your TV Connecting the aerial For viewing digital terrestrial signals only, connect the antenna directly to the digital aerial socket. • The connecting cables are not provided. • For further details, refer to the manuals provided with the devices to be connected. Caution • Turn off all the equipment including the TV before connecting anything.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 10 Thursday, October 7, 2004 4:42 PM Setting up your TV Connecting the power cord to the AC outlet Insert the AC plug on the power cord from the TV into an AC outlet. The TV will enter standby mode. Initial settings When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 11 Thursday, October 7, 2004 4:42 PM Setting up your TV • If the JVC logo does not appear this is because your TV has already been turned on for the first time: Perform the initial settings with “Installation” (see page 34) in the DTV menu and “AUTO PROGRAM (Analogue)” (see page 53) in the SET UP menu. 3 Press the a button The Digital terrestrial broadcasting (DVB-T) Automatic Search starts.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 12 Thursday, October 7, 2004 4:42 PM Setting up your TV • If you want to, you can now edit the programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL (Analogue)” on page 53. • If you do not want to edit programme numbers (PR), go to the next step.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 13 Thursday, October 7, 2004 4:42 PM Setting up your TV When the T-V LINK menu is changed over to another menu: The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next. If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu: Check the following three items. Then press the 2 button to retry data transmission.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 14 Thursday, October 7, 2004 4:42 PM Setting up your TV Do not turn the TV off in the following cases. • when recording images from an external device connected to the TV (for example a camcorder) • when recording a TV channel after it has been unscrambled on a decoder • when recording a TV channel by using the TV’s output because the VCR’s own tuner cannot properly receive that channel.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 15 Thursday, October 7, 2004 4:42 PM Basic operations (TV) 1 Turn the TV on from standby mode Press the A button or the P p buttons to turn the TV on from standby mode. When the TV is turned on, the power lamp lights green. 2 To turn the TV off: Press the A button again. The power lamp goes off. Caution • The A button on the TV does not fully isolate the TV from the AC supply.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 16 Thursday, October 7, 2004 4:42 PM Basic operations (TV) Watching images from external devices Press the TV/AV buttons to choose an EXT terminal TV mode Analogue terrestrial broadcasting EXT modes EXT-1 EXT-2 E1 or S1 E2 or S2 EXT-3 E3 or S3 Digital terrestrial broadcasting (DVB-T) PC EXT-4 E4 Adjust the volume 1 Press the r (Volume) button once The volume level indicator appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 18 Thursday, October 7, 2004 4:42 PM Basic operations (Remote control) Turn the TV on or off from standby mode Press the # (standby) button to turn the TV on or off. When the TV is turned on, the power lamp lights green. • The power can be turned on by pressing the TV/DTV button, p p buttons or Number buttons. To turn the TV on or off, set the VCR/TV/ DVD switch on the remote control to the TV position and press the # button.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 19 Thursday, October 7, 2004 4:42 PM Basic operations (Remote control) • Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this happens, change the output setting of the connected device to interlacescanning component signal output.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 20 Thursday, October 7, 2004 4:42 PM Basic operations (Remote control) PANORAMIC: This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. This mode may result in information such as headlines or rolling text at the very top or bottom of the screen not being fully viewable on some programmes.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 21 Thursday, October 7, 2004 4:42 PM Basic operations (Remote control) • The visible area adjustment is saved even after the TV channel is changed. However, it is cancelled if the following operations are performed.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 22 Thursday, October 7, 2004 4:42 PM Operation while watching DTV Information function When the h (Information) button is pressed, the programme information appears for approximately 1 minute. ITV News 41 CH61 Now: 13:00-14:00 Steve Scott 13:19 Next: 14:00-14:30 Steve Scott D0203-EN • When the h (Information) button is pressed while the information is being displayed, the information disappears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 23 Thursday, October 7, 2004 4:42 PM Operation while watching DTV • 1125i, 625p, and 525p signal pictures cannot be displayed as the sub-picture. • The BLUE BACK function does not work when the “Multi-picture” function is being used. • The ZOOM function does not work when the “Multi-picture” function is being used.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 24 Thursday, October 7, 2004 4:42 PM Operation while watching DTV Press the h (Information) button to display the help screen. Press it again to return to the EPG screen. 1 BBC ONE 13:12 Electronic Programme Guide The Rugby World Cu...
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 25 Thursday, October 7, 2004 4:42 PM Operation while watching DTV Displaying the Subtitles With Digital terrestrial broadcasting (DVBT), some programmes are broadcast with subtitles. Subtitles can be displayed when watching these programmes.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 26 Thursday, October 7, 2004 4:42 PM Digital Teletext function 1 Press the g button The digital teletext information appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 27 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Buttons used to operate the menus TV/DTV Displaying the DTV menu 1 Press the H button to display the menu bar DTV D0105-EN • DTV in the menu bar can only be chosen when watching Digital terrestrial broadcasting (DVB-T). 2 Press the 5 buttons to choose the DTV DTV D1105-EN Chosen menu name 3 Press the a button The DTV menu appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 28 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu 1 Choose Timers and press the a button The TIMER menu appears. TIMER MENU No.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 29 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu The TV power lamp begins flashing at three minutes before the timer start time. If you are watching TV at the time, a message appears on the screen to inform you the timer is about to start. If the TV is in Standby, the power lamp lights orange while timer recording is in progress.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 30 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Subtitle language Configuration Set the basic setting for watching Digital terrestrial broadcasting (DVB-T). With Digital terrestrial broadcasting (DVBT), a number of subtitles can be broadcast at the same time. Choose the subtitle you want to display when watching these broadcasts. Choose configuration and press the a button CONFIGURATION appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 31 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Receiver Upgrade Set the method to upgrade the Digital terrestrial broadcasting (DVB-T) receiver software. 1 Press the 6 buttons and choose Receiver Upgrade, and press the a button The setting window appears. CONFIGURATION Audio Language Subtitle Favourite Mode Receiver Upgrade Enter PIN code Automatic Download Search for New Version English English Off V.3.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 32 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Choosing a channel Edit PR List The Edit PR List can be used to do the following: • delete registered channels • edit channel names • lock channels so that they cannot be watched by children • set Favorites so that you can easily choose from only the channels you often watch. Choose Edit PR List and press the a button EDIT PR LIST appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 33 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Editing a channel name 1 Press the 5 buttons and choose Edit Name on the bar at the bottom of the screen 2 Press the 6 buttons and choose the channel to be edited, and then press the a button The edit window appears. 2 2 Press the 6 buttons and choose the channel to be locked, and then press the a button The Enter PIN code input window appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 34 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Setting the favourite channels Channels that you often watch can be set as favourite channels. You can choose from just those channels when the p p buttons are pressed. • After setting the favourite channels, check that “Favourite Mode” in “Configuration” (see page 30) is set to ON.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 35 Thursday, October 7, 2004 4:42 PM Operation with the DTV menu Factory Settings: Choose when you have moved house etc and want to automatically re-register all the channels. In addition to registering all the channels that can be received, it will reset the timer settings. When Factory Settings is chosen and the a button is pressed, the confirmation window appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 36 Thursday, October 7, 2004 4:42 PM Operation while watching analogue TV Information function You can see the channel number of the programme you are watching, the current time or the PR LIST. From the PR LIST, you can choose a channel or EXT terminal. Press the h (Information) button to display the information you want to see.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 37 Thursday, October 7, 2004 4:42 PM Operation while watching analogue TV Using the “Freeze” function You can view the current programme as a still picture. 1 Press the f button The still picture of the current picture will appear. current programme still picture 2-pictures multi: Mainpicture Subpicture D0056 With 1125i and 750p signals, the screen is split into two as shown below.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 38 Thursday, October 7, 2004 4:42 PM Operation while watching analogue TV • When set to 2-pictures multi, the mainpicture sound from the TV speaker can be changed to the sub-picture sound by pressing the c button. (The speaker mark moves from the main-picture to the sub-picture.) The sound changes to the main-picture sound if the c button is pressed again.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 39 Thursday, October 7, 2004 4:42 PM Operation while watching analogue TV Calling the favourite channel 1 In the normal screen, press the d (favourite) button Then “FAVOURITE1-4?” appears. 2 Press one of the number buttons 1 to 4 The called favourite channel appears on the screen. • If a number button in which no channel is registered is pressed, “NO MEMORY” appears on the screen.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 41 Thursday, October 7, 2004 4:42 PM Analogue teletext function Using the List Mode You can store the numbers of your favourite teletext pages in memory and call them up quickly using the colour buttons. To store the page numbers: 1 Press B button to go into the List mode The page numbers you have stored are displayed at the bottom of the screen. 2 Press a colour button to choose a position.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 42 Thursday, October 7, 2004 4:42 PM Analogue teletext function Size You can double the height of the teletext display. Press the F (Size) button Index You can return to the index page instantly. Press the G (Index) button Returns to page 100 or a previously specified page. Cancel You can search for a teletext page while watching TV.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 43 Thursday, October 7, 2004 4:42 PM Setting the TV Call the menu and perform the settings for the picture and sound.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 44 Thursday, October 7, 2004 4:42 PM Setting the TV Operation with the buttons on the TV You can also operate the menus using the buttons on the front panel of the TV.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 45 Thursday, October 7, 2004 4:42 PM PICTURE menu BRIGHT-1 PICTURE PICTURE MODE BRIGHT-1 CONTRAST BRIGHT-2 SHARP COLOUR HUE COLOUR TEMP. FEATURES STANDARD You can adjust the back light. 2 : darker 3 : brighter COOL RESET OK D0014-EN • While the PICTURE menu is displayed, pressing the blue button will set the BRIGHT-1, CONTRAST, BRIGHT-2, SHARP, COLOUR, HUE settings to their default settings.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 46 Thursday, October 7, 2004 4:42 PM PICTURE menu COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. NORMAL: The normal white colour. WARM: A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films. FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 47 Thursday, October 7, 2004 4:42 PM PICTURE menu AUTO: The TV will automatically adjust the level of the DigiPure effect to match the amount of noise in the picture, giving the best possible picture. MIN: The level of DigiPure effect is set to the minimum. When you set the Super DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 48 Thursday, October 7, 2004 4:42 PM PICTURE menu COLOUR SYSTEM The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM. Then press the a or 3 button The sub-menu of the COLOUR SYSTEM function appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 49 Thursday, October 7, 2004 4:42 PM SOUND menu BALANCE SOUND STEREO/ BASS TREBLE BALANCE 3D SOUND A.H.B. BBE OFF OFF OFF OK D0019-EN • When the headphones are connected, only “STEREO / I • II” can be used. • STEREO / I • II cannot be chosen when watching Digital terrestrial broadcasting (DVB-T).
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 50 Thursday, October 7, 2004 4:42 PM FEATURES menu FEATURES SLEEP TIMER CHILD LOCK APPEARANCE BLUE BACK FAVOURITE SETTING TYPE A ON To cancel the SLEEP TIMER function: Press the 2 button to set the period of time to “OFF”. CHILD LOCK OK D0023-EN • CHILD LOCK, APPEARANCE, BLUE BACK, and FAVOURITE SETTING cannot be chosen when watching Digital terrestrial broadcasting (DVB-T).
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 51 Thursday, October 7, 2004 4:42 PM FEATURES menu 4 Press the 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. 5 Press the blue button and set the CHILD LOCK function. Then press the a button n (CHILD LOCK) appears and the TV channel is locked.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 52 Thursday, October 7, 2004 4:42 PM FEATURES menu BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. ON: This function is turned on. OFF: This function is turned off. FAVOURITE SETTING Choose when deleting the analogue favorite channels registered in buttons 1 to 4.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 53 Thursday, October 7, 2004 4:42 PM SET UP menu EDIT/MANUAL (Analogue) SET UP AUTO PROGRAM EDIT/MANUAL DECODER(EXT-2) COMPONENT AUTO SELECT EXT SETTING OFF OFF OK D0029-EN • AUTO PROGRAM, EDIT/MANUAL, and DECODER (EXT-2) cannot be chosen when watching Digital terrestrial broadcasting (DVB-T).
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 54 Thursday, October 7, 2004 4:42 PM SET UP menu Basic operation MOVE 1 Choose EDIT/MANUAL, then press the a or 3 button The EDIT menu appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 57 Thursday, October 7, 2004 4:42 PM SET UP menu CH/CC NUMBER • When you want to use the INSERT function on page 56, find the CH/CC number corresponding to the channel number of the TV channel from this table. If you want to know a particular TV channel’s channel menu, look in TV listings magazines or contact the broadcaster.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 58 Thursday, October 7, 2004 4:42 PM SET UP menu DECODER (EXT-2) If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels. 1 Turn on the decoder power 2 Display the scrambled TV channel on the TV Even if the decoder is working, a scrambled picture appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 59 Thursday, October 7, 2004 4:42 PM SET UP menu 1 Press the 5 or 6 buttons to choose an EXT terminal EXT SETTING 1 Choose EXT SETTING, then press the a or 3 button The EXT SETTING menu appears.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 60 Thursday, October 7, 2004 4:42 PM SET UP menu ID LIST DUBBING You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 61 Thursday, October 7, 2004 4:42 PM SET UP menu DTV: The picture and sound of the Digital terrestrial broadcasting (DVB-T) TV channel you are currently viewing are output from the EXT-2 terminal. • During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 62 Thursday, October 7, 2004 4:42 PM Displaying a computer screen This TV can be used as a computer screen. Connecting to the computer Use a D-SUB cable to connect the TV’s PC IN terminal to the computer’s analogue RGB output terminal. If you want to listen to the sound from the computer, use an audio cable to connect the EXT-3 L/R terminal to the computer’s sound output terminal.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 63 Thursday, October 7, 2004 4:42 PM Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connecting anything: • Read the manuals that came with the equipment. Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 65 Thursday, October 7, 2004 4:42 PM Additional preparation Equipment which can output the S-VIDEO signal (Y/C signal) Connect the equipment to an EXT terminal (but not the EXT-4 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 59.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 66 Thursday, October 7, 2004 4:42 PM Additional preparation Connecting speakers/amplifier While referring to the audio equipment connection diagram, connect the audio equipment you want to the TV. You can use external front speakers to listen to the TV sound instead of the TV speakers. Before connecting anything: • Read the manuals provided with the amplifier and speakers. • Turn the TV and amplifier off.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 67 Thursday, October 7, 2004 4:42 PM Troubleshooting Digital terrestrial broadcasting (DVB-T) service area Although this TV can receive both Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting, depending on the area in which you live, you may not be able to receive Digital terrestrial broadcasting (DVB-T).
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 68 Thursday, October 7, 2004 4:42 PM Troubleshooting • If the TV suffers interference from signals reflecting from mountains or buildings, double-pictures (ghosting) will occur. Try to change the aerial’s direction or replace it with one with better directionality. • Are your COLOUR SYSTEM settings correct? Follow the description “COLOUR SYSTEM” on page 48 to try to solve the trouble.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.book Page 69 Thursday, October 7, 2004 4:42 PM Troubleshooting • The top of the TV and the screen may become hot during use but this has no affect on the performance of the TV. Make sure that the ventilation holes are not blocked. • When the picture is unstable, the screen may become white for a moment. This happens when the signal which drives the liquid crystal is missing. This is not a fault.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH LT-32&26D50BJSJ_Eng.
LT-32/26D50BJ/SJ / LCT1703-001B-U / All Cover LT-32&26D50BJSJ_Eng.
