INSTRUCTIONS MANUAL DE INSTRUCCIONES EN SP ENGLISH LYT1994-001B-M MEMORY CAMERA CÁMARA DIGITAL GZ-MS120 U Dear Customers Thank you for purchasing this memory camera. Before use, please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product. For Future Reference: Enter the Model No. (located on the bottom of the memory camera) and Serial No. (located on the battery pack mount of the memory camera) below. Model No. Serial No.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Only use attachments/accessories specified by the manufacturer. 10.
Easy Start Guide Charge the Battery Before Recording Turn off the camcorder and attach the battery pack. Access lamp blinks: Accessing files Power/charge lamp blinks: Charging goes out: Charging finished Do not remove the AC adapter, the battery pack or the SD card when the lamp is blinking. Open the cover Battery Pack The battery pack is not charged at the time of purchase. CAUTION • AC Adapter To AC Outlet (110V to 240V) Be sure to use JVC battery packs.
Q S Open the LCD monitor to turn on the camcorder CLOCK ADJUST CLOCK SETTING AREA SETTING SET FOR DAYLIGHT SAVING TIME Power button ( ) SET THE CITY, DATE AND TIME @ T LCD monitor R Select [CLOCK SETTING] ENGLISH Date/Time Setting QUIT Select the city closest to the area where you use the camcorder AREA SETTING Select [YES] within 10 seconds GMT : JAN. 1.2009 01.00AM SET Slide your finger up and down on the sensor. Then touch OK.
Video Recording CAUTION • Before recording an important scene, it is recommended to conduct a trial recording. Q Slide the mode switch to select ! (video) mode R Select recording mode The mode changes when you press the button. The auto recording indicator appears. S Start recording REC Remaining space on the SD Card Video Quality Press the START/STOP button to start recording, and press it again to stop. Record-standby [ 4 h 59 m ] 0:04:01 REC Recording GZ-MS120US_IB_EN.
ENGLISH Playing Back Q Select playback mode The mode changes when you press the button. R Select the desired file Index screen VIDEO PLAYBACK DIGEST S 1/2 NOV. 1. 2009 04:55PM , Select (Touch OK) Playback screen 0:00:42 J K NOV. 1. 2009 04:55AM Q L J K L To perform operations such as forward search or reverse search (Z p. 22) L To view files on TV (Z p. 25) CAUTION Do not forget to make copies after recording! • To copy files onto DVD discs (Z p.
Contents GETTING STARTED Accessories........................................... 10 Attaching the Core Filter ............................... 10 Tripod Mounting............................................ 11 Index....................................................... 12 Indications on LCD Monitor.................. 14 Necessary Settings before Use............ 16 Charging the Battery Pack............................ 16 Date/Time Setting......................................... 16 Language Setting............
After the menu is displayed on the LCD monitor: VIDEO DUBBING PLAYBACK PLAYBACK MPG FILE EDIT l ON-SCREEN DISPLAY SWITCH DISPLAYED CONTENTS SET QUIT A To select an on-screen button appearing at the bottom of the screen, touch the buttons underneath them. In order to view the GUIDEBOOK, Adobe® Acrobat® ReaderTM or Adobe® Reader® must be installed. Adobe® Reader® can be loaded from Adobe’s web site: http://www.adobe.com/ NOTE Select your desired language with a single click.
Accessories or AP-V20U/AP-V14U* AC Adapter BN-VF808U Battery Pack AV Cable USB Cable CD-ROM Core Filter (x2) NOTE Make sure to use the provided cables for connections. Do not use any other cables. * AP-V14U is not mentioned in the GUIDEBOOK in the supplied CD-ROM Attaching the Core Filter The core filter reduces interference caused when connecting to other devices. Connect the end of the cable with the core filter to the camcorder. Release the stopper.
Align the camcorder stud hole with the tripod stud, and the mounting socket with the screw, and then rotate the camcorder clockwise to mount it to the tripod. GETTING STARTED Bottom of the camcorder ENGLISH Tripod Mounting NOTE Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder. 11 GZ-MS120US_IB_EN.
GETTING STARTED Index B A DC DC NOTE • The LCD monitor can rotate 270°. • Be careful not to cover 4, 5 and 6 during shooting. 12 GZ-MS120US_IB_EN.
Touch Sensor (Z p. 9) OK Button MENU Button Power Button [ ] UPLOAD Button (Z p. 36) PLAY/REC Button (Z p. 19, 20, 22, 23) Mode Switch [!, #] DIRECT DVD Button (Z p. 28) INFO Button (Z p. 21) + SD Card Slot , EXPORT Button (Z p. 35) - AV Connector (Z p. 25, 34) GETTING STARTED ! # $ % & ( ) * ENGLISH Camcorder . START/STOP Button (Z p. 19) / SNAPSHOT Button (Z p. 20) 0 Zoom Lever [W 7 , T] (Z p. 21) Speaker Volume Control [–VOL+] (Z p. 22) 1 Speaker 2 DC Connector 3 USB Connector [ 2 ] (Z p.
Indications on LCD Monitor During both Video and Still Image Recording N OV. 1 . 2 0 0 9 During Video Recording Only 4 : 55 PM ! Selected Recording Mode Indicator (Z p. 24) @ : Auto Mode 3 : Manual Mode # Effect Mode Indicator $ Tele Macro Mode Indicator % LED Light Indicator (Z p. 21) & Scene Select Indicator ( Quick Review Indicator (Z p. 19, 20) ) Zoom Indicator (Z p.
During Still Image Playback ENGLISH During Video Playback GETTING STARTED 8 N OV. 1 . 2 0 0 9 N OV. 1 . 2 0 0 9 4:55 PM ! Mode Indicator # Playlist Playback Indicator (Appears when playing back a playlist.) $ Video Quality: B (ULTRA FINE), C (FINE), D (NORMAL), E (ECONOMY) % Counter & Playback Mode F: Playback Q: Pause K: Forward Search J: Reverse Search G: Forward Slow-Motion E: Reverse Slow-Motion (The number on the left shows speed.) ( Battery Indicator ) Date/Time (Z p.
Necessary Settings before Use Charging the Battery Pack 1 2 L To detach the battery pack Close the LCD monitor to turn off the camcorder. Attach the ���������������������������� battery pack, then connect the AC adapter. • With the “” (arrow) on the battery pack pointing at the correct direction, slide the battery pack until it locks in place. NOTE • You can also use the camcorder with just the AC adapter.
6 Select [CLOCK SETTING]. CLOCK ADJUST Select the city closest to the area you are traveling. CLOCK SETTING AREA SETTING AREA SETTING SET FOR DAYLIGHT SAVING TIME 6 Select the city closest to the area where you use the camcorder. Selected area is highlighted AREA SETTING 7 : NOV. 1.2009 04.55PM SET NOV. 1.2009 04.55PM QUIT L To return to the previous screen Select @. L To quit the screen Language Setting QUIT The language on the display can be changed.
Other Setting NOTE Using an SD Card • Insert and remove the SD card only while If you want to record to an SD card, the following operations need to be performed. • Operations are confirmed on the following SD cards. Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB). • If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded. • MultiMediaCards are not supported.
RECORDING/PLAYBACK Recording Files ENGLISH Video Recording Preparation: • Open the LCD monitor to turn on the camcorder. • Insert an SD card. Slide the mode switch to select ! (video) mode. Press PLAY/REC to select recording mode. PLAY/REC RECORDING/ PLAYBACK SNAPSHOT B 0 : 00 : 00 Press START/STOP to start recording. B 0 : 00 : 01 REC Approximate remaining time for recording You can also start/stop recording by selecting [REC] on the LCD monitor.
Recording Files (Continued) Still Image Recording Preparation: • Open the LCD monitor to turn on the camcorder. • Insert an SD card. Slide the mode switch to select # (still image) mode. Press PLAY/REC to select the recording mode. PLAY/REC FINE [9999] Press and hold SNAPSHOT halfway. The ? indicator becomes green when the captured image is focused. L To view the last recorded image Select A after shooting. Selecting * during playback deletes that image.
Preparation: • Select ! or # mode. • Select the recording mode. Zoom out Zoom in Preparation: • Attach the battery pack. • Select the recording mode. ENGLISH ! mode: W: Wide angle T: Telephoto Press INFO three times or INFO and then select ;. # mode: Press INFO. You can also zoom out/zoom in by selecting [W] or [T] on the LCD monitor. (On-screen zoom control) Maximum zoom ratio (factory-preset).
Playing Back Files Video Playback Preparation: • Open the LCD monitor to turn on the camcorder. • Insert an SD card. Slide the mode switch to select ! (video) mode. Press PLAY/REC to select the playback mode. VIDEO PLAYBACK 1/2 PLAY/REC NOV. 01. 2009 04:55PM DIGEST , The index screen appears. Select the desired file. L To move to the previous or next page Touch [] or [] for over a second. L To play back a few seconds from each select scene of the recorded video Touch [DIGEST].
ENGLISH Still Image Playback Preparation: • Open the LCD monitor to turn on the camcorder. • Insert an SD card. Slide the mode switch to select # (still image) mode. Press PLAY/REC to select the playback mode. IMAGE PLAYBACK 1/2 PLAY/REC , RECORDING/ PLAYBACK NOV. 01. 2009 04:55PM The index screen appears. Select the desired file. L To move to the previous or next page Touch [] or [] for over a second. L To delete a still image Select *.
Manual Recording Manual recording mode enables you to set the focus and screen brightness etc. manually. Changing to Manual Recording Mode Preparation: • Select ! or # mode. • Select the recording mode. Manual Setting in Menu In the manual recording mode: 1 Touch MENU. 2 Select [MANUAL SETTING]. VIDEO Select [A/M] twice. M B MANUAL SETTING ¤ D LIGHT [4 h 59 m] 1 REGISTER EVENT n VIDEO QUALITY B USE DETAIL SETTINGS BASED SET QUIT 3 Select the desired menu.
Viewing Files on TV Playback Operation After the connection with TV is completed 1 Turn on the camcorder and the TV. You can output videos from the AV connector. 2 Set the TV to its VIDEO mode. L To connect using the AV connector. 3 Connection with TV Preparation: • Turn off all units. AC Adapter (Only when connecting the camcorder to the VCR/DVD recorder) Turn on the VCD/DVD recorder, and set the VCR/DVD recorder to its AUX input mode.
EDITING/PRINTING Managing Files CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing files. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery becomes exhausted during operation. If the data on the recording medium becomes corrupted, format the recording medium to use the medium again.
COPYING Copying Files Using a DVD Burner Supported discs: 12cm DVD-R, DVD-RW ENGLISH Types of Copying and Connectable Device • Regarding DVD-R discs, only unused DVD-R DVD Burner (CU-VD50/CU-VD3) You can copy video files recorded on this camcorder onto DVD discs. VCR/DVD Recorder You can dub video files recorded on this camcorder onto DVD discs. Regarding finalization after copying The disc is automatically finalized so that it can be played on other devices.
Copying Files (Continued) Backup All Files Copying Video Files that Have Never Been Copied Preparation: • Connect the camcorder to the DVD burner. • Select ! mode. Files that have never been copied to the DVD discs are automatically selected and copied. 1 1 Select [CREATE FROM ALL]. CREATE DVD CREATE FROM ALL 2 SELECT AND CREATE CREATE DUPLICATE PLAYBACK Press DIRECT DVD. DIRECT DVD COPY RECORDED VIDEOS SET 2 Open the LCD monitor to turn on the camcorder. Select the desired menu.
Please read the “JVC SOFTWARE LICENCE AGREEMENT” in the CD-ROM instruction before you install software. You can copy the data from the camcorder and create a DVD using a PC. Preparation: Load the provided CD-ROM into the PC. In Windows Vista, the auto play dialog box appears. 1 ENGLISH Creating a DVD using a PC Click [Easy Installation].
Copying Files (Continued) R Making Backup on the PC Preparation: • Install the software to the PC. • Make sure that enough free space is left in the PC’s hardisk. • Close the LCD monitor to turn off the camcorder. 1 Open the LCD monitor to turn on the camcorder. 2 Select [BACK UP]. USB MENU CREATE DVD UPLOAD EXPORT TO LIBRARY BACK-UP DC Connector AC Adapter SAVE RECORDED VIDEO/STILL SET QUIT To AC Outlet Everio MediaBrowser starts on the PC. 3 Click [All volume in camcorder] and click [Next].
5 Double-click the recording date. You can make a user list of a certain subject (such as Travel, Athletic meet) and put the files related to the subject into the user list. ENGLISH S Making User Lists to Arrange the Files Preparation: Make backup on the PC. 1 Double-Click the icon and open the calendar. 2 Select [Movies only]. The files recorded on the day are displayed. 6 Drag the file and drop into the user list. To add other files into the user list, repeat steps 5 and 6. Click [+].
Copying Files (Continued) T Copying Files to a DVD 5 Click [Start]. Preparation: Use a recordable DVD disc. (It is recommended to use a DVD-R disc.) 1 Select the user list and click [Create Disc]. NOTE • For detail on operating Everio MediaBrowser, click [Help] and refer to “MediaBrowser Help”. ® Reader® must be installed to read “MediaBrowser Help”. Adobe® Reader® can be loaded from Adobe’s web site: http://www.adobe.
X = number Recording medium Contains the still image folders. [DCIM] ENGLISH Folder Structure and Extensions [XXXJVCSO] [MGR_INFO] Contains the video file folders. Management information* for the media as a whole [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] Management information* Video file Management information* for the video files [SD_VIDEO] [PRGXXX] [EXTMOV] Video file which management information is corrupted. [MOV_XXX.
Copying Files�� (Continued) Dubbing Files to a VCR/DVD Recorder Preparation: • Create a playlist. • Turn off all units. 1 2 (analog dubbing) DC Connector Set the VCR/DVD recorder to its AUX input mode. Check that the images from the camcorder are input correctly to the VCR/DVD recorder. L To connect using the AV connectors AV Connector Open the LCD monitor to turn on the camcorder. 3 Play back playlists on the camcorder. 1) 2) 3) 4) AV 4 AC Adapter AV Cable Touch MENU.
Using with a Portable Media Player You can easily transfer videos recorded in export mode to iTunes®. All the files with the export setting turned on are transferred to PC. For details on transferring, refer to the operation guide of MediaBrowser in the CD-ROM. L To quit the screen 1) Select [DONE]. 2) Select [YES]. Preparation: • Select ! mode. • Select the recording mode. Preparation: • Install iTunes® on a PC. http://www.apple.com/itunes/ Transferring the Files to PC 1 Press EXPORT twice.
Uploading Files to Websites Turning on the Upload Mode You can upload the file to video sharing websites (YouTube™) quickly after recording. For more information on YouTube™, visit YouTube™ website: http://www.youtube.com/ Preparation: • Select ! mode. • Select the recording mode. Uploading Files For details on uploading fi les, refer to the operation guide of MediaBrowser in the CD-ROM. 1 2 Connect the camcorder to the PC with the USB cable. Select [UPLOAD]. USB MENU Press UPLOAD twice.
MENU SETTINGS Changing the Menu Settings Touch MENU. 2 Select the desired menu. L To return to the previous screen Select @. L To quit the screen Select [QUIT]. VIDEO ENGLISH 1 REGISTER EVENT n VIDEO QUALITY B q 0 @ ZOOM @ DIS IMAGE BLURRED NEED TO SET 3 QUIT Select the desired setting. VIDEO REGISTER EVENT OFF 1QUALITY n VIDEO C q 0 0 ON @ ZOOM @ DIS SET QUIT Troubleshooting Before requesting service, consult the following chart.
Troubleshooting (Continued) Trouble Recording Recording cannot be performed. Action • SD card is full. Delete unnecessary files or replace the SD card. • Insert a commercially available SD card, and set each of the Recording stops by itself. Sound or video are interrupted. [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B]. • Recording stops automatically after 12 hours of non-stop recording.
Warning Indications Action SET DATE/TIME! • Set the clock. If the message still appears after setting the clock, the battery for the clock has been depleted. Consult your nearest JVC dealer. COMMUNICATING ERROR • Be sure to use JVC battery packs. NOT FORMATTED • Select [OK] and select [YES] to perform formatting. • Check the operating procedure, and perform once again. • Turn off the camcorder, and turn it on again.
Specifications L General Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 1.8 W* * When the LED light is off and the monitor backlight is set to [STANDARD] mode. Rated Current Consumption: 1A Dimensions (W x H x D) L AC adapter Power requirement AC 110 V to 240 Vd, 50 Hz/60 Hz Output DC 11 V ,1A § L Still image Format JPEG Image size 1 mode: 832 x 624 2 modes: FINE/STANDARD 54.5 mm x 65 mm x 112.
hr: hour/min: minute Recording medium SD or SDHC Card 256 MB 512 MB 1 GB 2 GB 4 GB ULTRA FINE 3 min. 6 min. 14 min. 29 min. 1 hr. FINE 5 min. 10 min. 21 min. 43 min. NORMAL 6 min. 13 min. 29 min. 1 hr. ECONOMY 18 min. 36 min. 1 hr. 20 min. 2 hr. 30 min. Quality 1 hr. 20 min. 1 hr. 50 min. 5 hr. 8 GB 16 GB 32 GB 1 hr. 50 min. 2 hr. 50 min. 3 hr. 45 min. 9 hr. 55 min. 3 hr. 45 min. 5 hr. 40 min. 7 hr. 30 min. 7 hr. 30 min. 11 hr. 20 min. 20 hr. 40 hr.
Cautions ATTENTION: The battery you have purchased is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. AC Adapter When using the AC adapter in areas other than the USA The provided AC adapter features automatic voltage selection in the AC range from 110 V to 240 V.
• • Fasten the grip belt securely. • When using the camcorder with a tripod, attach Model Number: GZ-MS120AU/BU/RU Trade Name: JVC Responsible party: JVC AMERICAS CORP. Address: 1700 Valley Road Wayne, N. J. 07470 Telephone Number: 973-317-5000 This device complies with Part 15 of FCC Rules.
Terms A B C D E F I L AC Adapter .................................................. 16, 42 AV Connection.............................................. 25, 34 Backlight Compensation .................................... 24 Battery Pack ................................................ 16, 42 CD-ROM ...................................................... 10, 29 Clock Adjust ....................................................... 16 M N O P Date/Time Setting ................................................
MEMO GZ-MS120US_IB_SP.
Precauciones de seguridad ADVERTENCIA: PARA EVITAR RIESGO DE INCENDIOS O ELECTROCUCIONES, NO EXPONGA ESTE APARATO A LA LLUVIA O HUMEDAD. NOTAS: • La placa de valores nominales y la precaución • • de seguridad se encuentran en la parte inferior y/o en la parte posterior de la unidad principal. La placa del número de serie se encuentra en el compartimiento de la batería.
1. 2. 3. 4. 5. 6. 7. Lea estas instrucciones. Conserve estas instrucciones. Preste atención a las advertencias. Siga todas las instrucciones. No utilice este aparato cerca del agua. Limpie sólo con paño seco. No bloquee ninguna abertura de ventilación. Instale de acuerdo con las instrucciones del fabricante. 8. No lo instale cerca de ninguna fuente de calor tales como, radiadores, calefactores, cocinas, u otros aparatos (incluyendo amplificadores) que produzcan calor. 9.
Guía de Inicio Rápido Cargue la batería antes de grabar Apague la videocámara e inserte la batería. Luz de acceso Luz de alimentación/carga Parpadea: carga en curso Se apaga: carga terminada Parpadea: acceso a los archivoss Cuando esta luz parpadea, no extraiga el adaptador de CA, la batería ni la tarjeta SD. Abrir la cubierta Batería La videocámara se suministra con la batería descargada. Adaptador de CA A la toma de CA (de 110 V a 240 V) PRECAUCIÓN • Asegúrese de utilizar baterías JVC.
Q S Abra la pantalla LCD para encender la videocámara AJUS. RELOJ CONF. RELOJ CONF. AREA CONF. PARA HORARIO DE VERANO Botón de alimentación ( ) CONF. LA HORA, CIUDAD Y HORA @ AJUSTE SALIR T Pantalla LCD R Seleccione [CONF. RELOJ] ESPAÑOL Ajuste de la fecha/hora CONF. ÁREA Seleccione [SÍ] en 10 segundos GMT SÍ NO AJUSTE : JAN. 1.2009 01:00 AJUSTE Deslice el dedo arriba y abajo por el sensor. A continuación, toque OK.
Grabación de vídeo PRECAUCIÓN • Antes de grabar una escena importante se recomienda realizar una grabación de prueba. Q R Deslice el interruptor de modo para seleccionar el modo ! (vídeo) Seleccione el modo de grabación El modo cambia al pulsar el botón. Aparece el indicador de grabación automática. S Inicie la grabación REC Espacio restante en la Tarjeta SD Calidad de vídeo Pulse el botón START/ STOP para iniciar la grabación y vuelva a pulsarlo para detenerla.
ESPAÑOL ón Reproducción Q Seleccione el modo de reproducción El modo cambia al pulsar el botón. R Seleccione el archivo que desee Pantalla de índice REPRODUCCIÓN VÍDEO DIGEST S 1/2 NOV. 01. 2009 04:55PM , Seleccione (Toque OK) Pantalla de reproducción 0:00:42 J K Q NOV. 1. 2009 04:55PM L J K L Para realizar operaciones como búsqueda hacia adelante o búsqueda hacia atrás (Z p. 22) L Para visualizar archivos en un televisor (Z p.
Contenido PREPARATIVOS Accesorios............................................. 10 Colocar el Filtro de Núcleo .......................... 10 Instalación en trípode................................... 11 Índice...................................................... 12 Indicaciones en la pantalla LCD........... 14 Ajustes preliminares necesarios......... 16 Carga de la batería....................................... 16 Ajuste de la fecha/hora................................. 16 Ajuste del idioma.................
Una vez que aparezca el menú en la pantalla LCD: VÍDEO REPROD. COPIA REPR. ARCHIVO MPG EDITAR l DATOS EN PANTALLA CONMUTAR CONTENIDO MOSTRADO AJUSTE SALIR B Para seleccionar un botón en pantalla que aparezca en la parte inferior de la pantalla, toque el botón que se encuentre debajo de él. Para poder ver la GUÍA, tiene que haber instalado el programa Adobe® Acrobat® ReaderTM o Adobe® Reader®. Adobe® Reader® se puede descargar desde el sitio Web de Adobe: http://www.adobe.
Accesorios o AP-V20U/AP-V14U* Adaptador de CA BN-VF808U Batería Cable AV Cable USB CD-ROM Filtro de núcleo (x2) NOTA Asegúrese de utilizar los cables suministrados para las conexiones. No utilice ningún otro cable. * El modelo AP-V14U no se menciona en el MANUAL del CD-ROM suministrado Colocar el Filtro de Núcleo Los datos grabados se podrían borrar mientras la videocámara se repara o se inspecciona. Haga copias de seguridad de todos los datos antes de solicitar una reparación o inspección.
Parte inferior de la videocámara PREPARATIVOS Encaje el orificio para perno de la videocámara con el perno del trípode y el zócalo de fijación con el tornillo; a continuación, gire la videocámara a la derecha para montarla en el trípode. ESPAÑOL Instalación en trípode NOTA No utilice el trípode en superficies inestables o desniveladas. La videocámara podría caer y sufrir una avería grave. 11 GZ-MS120US_IB_SP.
GETTING STARTED Índice B A DC DC NOTA • La pantalla LCD puede girar 270°. • Procure no tapar 4, 5 y 6 durante la filmación. 12 GZ-MS120US_IB_SP.
Sensor táctil (Z p. 9) Botón OK Botón MENU Botón de alimentación [ ] Botón UPLOAD (Z p. 36) Botón PLAY/REC (Z p. 19, 20, 22, 23) Interruptor de modo [!, #] Botón DIRECT DVD (Z p. 28) Botón INFO (Z p. 21) + Ranura para Tarjeta SD , Botón EXPORT (Z p. 35) - Conector AV (Z p. 25, 34) PREPARATIVOS ! # $ % & ( ) * ESPAÑOL Videocámara . Botón ������ START/STOP (Z p. 19) / Botón ������ SNAPSHOT (Z p. 20) 0 Palanca del zoom [W 7 , T] (Z p. 21) Control de volumen del altavoz [–VOL+] (Z p.
Indicaciones en la pantalla LCD Durante la grabación de vídeo e imágenes fijas N OV. 1 . 2 00 009 Sólo durante la grabación de vídeo 4 : 55 PM ! Indicador de modo de grabación seleccionado (Z p. 24) @ : Modo automático 3 : Modo manual # Indicador de modo de efectos especiales $ Indicador de modo telemacro % Indicador de luz LED & Indicador de selección de escena ( Indicador ������������������������������ de revisión rápida (Z p. 19, 20) ) Indicador de zoom (Z p.
Durante la reproducción de imágenes fijas ESPAÑOL Durante la reproducción de vídeo PREPARATIVOS 8 N OV. 1 . 2 0 0 9 4:55 PM N OV. 1 . 2 0 0 9 ! Indicador de modo # Indicador de reproducción de lista de reproducción (Aparece al reproducir una lista de reproducción.
Ajustes preliminares necesarios L Para extraer la batería Carga de la batería 1 2 Cierre la pantalla LCD para apagar la videocámara. Instale la batería y conecte el adaptador de CA. Con la “” (flecha) en el paquete de batería señalando en la dirección correcta, inserte el paquete de batería hasta que encaje en el lugar. NOTA • La videocámara también se puede usar con sólo el adaptador de CA.
6 Seleccione [CONF. RELOJ]. AJUS.RELOJ Seleccione la ciudad más cercana a la zona del viaje. CONF. RELOJ CONF. ÁREA CONF. ÁREA CONF. PARA HORARIO DE VERANO 6 Seleccione la ciudad más cercana a la zona donde vaya a usar la videocámara. El área seleccionada destaca. CONF. ÁREA Ciudad principal del área seleccionada Horas de diferencia GMT 7 SALIR CONF. PARA HORARIO DE VERANO HORARIO DE VERANO Ajuste del idioma El idioma en el que se muestra la información de la pantalla puede cambiarse.
Otros ajustes Uso de una tarjeta SD Si desea grabar en una tarjeta de memoria SD, debe realizar las siguientes operaciones. • Se ha confirmado el funcionamiento con las siguientes tarjetas de memoria SD. Tarjeta de memoria SD o SDHC compatible con clase 4 o superior Tarjetas de memoria SD, Panasonic, TOSHIBA, SanDisk o ATP (256 MB a 2 GB) o tarjeta de memoria SDHC (4 GB a 32 GB). • Si se utilizan otros soportes, pueden producirse errores en la grabación de datos o pueden perderse datos ya grabados.
RECORDING/PLAYBACK Grabación de archivos ESPAÑOL Grabación de vídeo Preparativos: • Abra la pantalla LCD para encender la videocámara. • Inserte una tarjeta SD. Deslice el interruptor de modo para seleccionar el modo ! (vídeo). Pulse PLAY/REC para seleccionar el modo de grabación. PLAY/REC Pulse START/STOP para empezar la grabación. B 0 : 00 : 01 L Para detener la grabación Pulse de nuevo el botón START/STOP. L Para ver el vídeo recién grabado Seleccione A durante la pausa.
Grabación de archivos (continuación) Grabación de imágenes fijas Preparativos: • Abra la pantalla de LCD para encender la videocámara. • Inserte una tarjeta SD. Deslice el interruptor de modo para seleccionar el modo # (imagen fija). Pulse PLAY/REC para seleccionar el modo de grabación. FINE [9999] PLAY/REC Mantenga pulsado SNAPSHOT hasta la mitad de su recorrido. El indicador ? se vuelve verde cuando la imagen capturada queda enfocada.
Preparativos: • Seleccione el modo ! o #. • Seleccione el modo de grabación. Reducción Ampliación T: Telefoto Preparativos: • Coloque el paquete de pilas. • Seleccione el modo de grabación. Modo !: Pulse INFO tres veces o INFO y luego seleccione ;. Modo #: Pulse INFO. También puede reducir/ampliar seleccionando [W] o [T] en la pantalla LCD. (Control de zoom en pantalla). Porcentaje de zoom máximo (preajuste de fábrica).
Reproducción de archivos Reproducción de vídeo Preparativos: • Abra la pantalla de LCD para encender la videocámara. • Inserte una tarjeta SD. Deslice el interruptor de modo para seleccionar el modo ! (vídeo). Pulse PLAY/REC para seleccionar el modo de reproducción. REPRODUCCIÓN VÍDEO 1/2 PLAY/REC NOV. 01. 2009 04:55PM , DIGEST Aparece la pantalla de índice. Seleccione el archivo que desee. L Para pasar a la página anterior o siguiente Toque [] o [] durante más de un segundo.
ESPAÑOL Reproducción de imágenes fijas Preparativos: • Abra la pantalla LCD para encender la videocámara. • Inserte una tarjeta SD. Deslice el interruptor de modo para seleccionar el modo # (imagen fija). Pulse PLAY/REC para seleccionar el modo de reproducción. REPROD. IMÁGENES 1/2 NOV. 01. 2009 04:55PM , Aparece la pantalla de índice. GRABACIÓN/ REPRODUCCIÓN PLAY/REC Seleccione el archivo que desee. L Para pasar a la página anterior o siguiente Toque [] o [] durante más de un segundo.
Grabación manual El modo de grabación manual permite ajustar manualmente el enfoque, el brillo de la pantalla, etc. Cambio al modo de grabación manual Preparativos: • Seleccione el modo ! o #. • Seleccione el modo de grabación. Ajuste manual en el menú En el modo de grabación manual: 1 Toque MENU. 2 Seleccione [AJUSTE MANUAL]. VÍDEO M Seleccione [A/M] dos veces. AJUSTE MANUAL D ILUMINACIÓN REGISTRAR EVENTO B n CALIDAD DE VÍDEO [4 h 59 m] ¤ 1 B USE CONFIG.
Visualización de archivos en un televisor Una vez realizada la conexión con el televisor 1 Conexión con el televisor Los vídeos se pueden emitir por el conector AV. L Para realizar la conexión con el conector AV. 2 3 Preparativos: • Apague todas las unidades. Ajuste el televisor en el modo de vídeo. (Sólo cuando se conecta la videocámara a la grabadora de vídeo/DVD) Encienda la grabadora de vídeo/DVD y ajuste la grabadora de vídeo/DVD en el modo de entrada AUX.
Gestión de archivos PRECAUCIÓN No extraiga el soporte de grabación ni realice ninguna otra operación (por ejemplo, apagar la alimentación) mientras se accede a los archivos. Asimismo, asegúrese de utilizar el adaptador de CA suministrado, ya que los datos del soporte de grabación se pueden dañar si la batería se agota durante la operación. Si los datos del soporte de grabación se dañan, deberá formatear el soporte de grabación para volver a usarlo.
COPYING Copia de archivos Uso de una grabadora de DVD Discos compatibles: DVD-R, DVD-RW de 12 cm ESPAÑOL Tipos de copia y dispositivos conectables • En cuanto a los discos DVD-R, sólo pueden Grabadora de DVD (CU-VD50/CU-VD3) Se pueden copiar en discos DVD archivos de vídeo grabados en esta videocámara. (Z columna derecha) Grabadora de vídeo o de DVD Puede copiar, en discos DVD, los archivos de vídeo grabados con esta videocámara.
Copia de archivos� (������������� continuación�) Copia de seguridad de todos los archivos Preparativos: • Conecte la videocámara a la grabadora de DVD. • Seleccione el modo !. 1 Seleccione [SELECC. ENTRE TODO]. CREAR DVD Copia de archivos de vídeo que nunca se han copiado Los archivos que nunca se han copiado en un disco DVD se seleccionan y copian automáticamente. 1 SELECC.
Lea, por favor, “Convenio de licencia del software de JVC” de las instrucciones del CD-ROM antes de instalar el software. Es posible copiar los datos de la videocámara y crear un DVD utilizando un PC. Preparativos: Inserte el CD-ROM suministrado en el PC. En Windows Vista aparece el cuadro de diálogo de reproducción automática. 1 ESPAÑOL Creación de un DVD mediante un PC Haga clic en [Easy Installation].
Copia de archivos (continuación) 2 R Copia de seguridad en un PC Preparativos: • Instale el software en el PC. • Asegúrese de que dispone de suficiente espacio libre en el disco duro del PC. • Cierre la pantalla LCD para apagar la videocámara. Conector de CC Adaptador de CA Seleccione [HACER COPIA DE SEGURIDAD]. MENÚ USB CREAR DVD CARGAR INSCR. EN LIBRARY COPIA DE SEGURIDAD GRABAR VÍDEO/IMÁGENES FIJAS AJUSTE SALIR El programa Everio MediaBrowser se inicia en el PC.
5 Haga doble clic en la fecha de grabación. Puede elaborar una lista personalizada de ciertos temas (por ejemplo, viajes, certámenes deportivos) e incluir los archivos relacionados con estos temas en la lista personalizada. ESPAÑOL S Creación de listas personalizadas para organizar los archivos Preparativos: Realice una copia de seguridad en el PC. 1 2 Haga clic en el icono y abra el calendario. Se muestran los archivos grabados en esa fecha.
Copia de archivos (continuación) T Copia de archivos en DVD 5 Haga clic en [Comienzo]. Preparativos: Utilice un disco DVD grabable. (Se recomienda utilizar un disco DVD-R.) 1 Seleccione la lista personalizada y haga clic en [Crear disco]. NOTA • Para obtener información detallada sobre • 2 Haga clic en [Selecciona los archivos individualmente] y haga clic en [Proximo]. Para añadir todos los archivos en discos DVD, haga clic en [Seleccionar todos los archivos visualizados] y vaya al paso 4.
X = número Soporte de grabación Contiene las carpetas de imágenes fi jas. [DCIM] ESPAÑOL Estructura de carpetas y extensiones [XXXJVCSO] [MGR_INFO] Contiene las carpetas de archivos de vídeo. Información de gestión* del soporte en conjunto [PRGXXX] [PRGXXX.PGI] [MOVXXX.MOD] [MOVXXX.MOI] Información de gestión* Archivo de vídeo Información de gestión* de los archivos de vídeo [SD_VIDEO] [PRGXXX] [EXTMOV] [MOV_XXX.MOD] [PRIVATE] El archivo de vídeo con información de gestión está dañado.
Copia de archivos (continuación) Copia de archivos en una grabadora de vídeo/DVD 1 2 Preparativos: • Cree una lista de reproducción. • Apague todas las unidades. Abra la pantalla LCD para encender la videocámara. Ajuste la grabadora de vídeo/DVD en el modo de entrada AUX. Asegúrese de que las imágenes de la videocámara se hayan introducido correctamente en la grabadora de vídeo/ DVD.
Utilización con un reproductor multimedia portátil Los vídeos grabados en el modo de exportación se pueden transferir fácilmente a iTunes®. Todos los archivos con el ajuste de exportación activado se transferirán al PC. Para obtener más información sobre como realizar la transferencia, consulte la guía de funcionamiento de MediaBrowser que aparece en el CD-ROM. Seleccione [SALIR]. L Para cancelar el ajuste de exportación Seleccione el archivo y elija EXPORT de nuevo.
Carga de archivos a sitios Web Activación del modo de carga Carga de archivos Tras la grabación se puede cargar el archivo rápidamente a sitios Web (YouTubeTM) creados para compartir vídeos. Si desea más información acerca de YouTube™, visiteel sitio web de YouTube™: http://www.youtube.com/ Para obtener más información sobre cómo cargar archivos, consulte la guía de funcionamiento de MediaBrowser que aparece en el CD-ROM. Preparativos: • Seleccione el modo !. • Seleccione el modo de grabación.
MENU SETTINGS Cambio de las configuraciones de menús Toque MENU. Seleccione el menú que desee. VÍDEO Seleccione [SALIR]. REGISTRAR EVENTO n CALIDAD DE VÍDEO B q 0 @ ZOOM DIS L Para volver a la pantalla anterior Seleccione @. L Para salir de la pantalla ESPAÑOL 1 2 @ IMAGEN BORROSA. TIENE QUE AJUSTE SALIR 3 Seleccione el ajuste que desee.
Solución de problemas� (������������� Continuación�) Problema Grabación La grabación no puede realizarse. Acción • La tarjeta de SD está llena. Elimine los archivos que no necesite o reemplace la tarjeta de SD (! o #). • Inserte una tarjeta SD de venta en comercios, y ajuste [SOPORTE La grabación se detiene. El vídeo o el sonido se interrumpe. GRAB. VÍDEO] y [SOPORTE GRAB. IMAGEN] en [Ranura A] o [Ranura B]. • La grabación se detiene automáticamente tras 12 horas de grabación continua.
Indicaciones de advertencia ¡AJUSTE FECHA/HORA! ERROR DE COMUNICACIÓN NO FORMATEADO ¡ERROR DE FORMATEO! ERROR ELIMIN. DATOS ¡ERROR EN TARJETA DE MEMORIA! Acción • Ajuste el reloj. Si sigue apareciendo el mensaje tras ajustar el reloj, significa que se ha agotado la pila del reloj. Consulte con su distribuidor JVC más próximo. ESPAÑOL Indicación • Asegúrese de utilizar baterías JVC. • Seleccione [ACEPTAR] y seleccione [SÍ] para realizar el formateo.
Especificaciones L Generalidades Fuente de alimentación eléctrica DC 11 V (con adaptador de CA) DC 7,2 V (con batería) Consumo eléctrico Aprox. 2,1 W* * Cuando la luz LED está apagada y la luz de fondo de la pantalla está ajustada en modo [ESTÁNDAR].
hr: hora/min.: minuto Soporte de grabación Tarjeta SD o SDHC 256 MB 512 MB 1 GB 2 GB 4 GB ULTRAFINA 3 min. 6 min. 14 min. 29 min. 1 hr. FINA 5 min. 10 min. 21 min. 43 min. NORMAL 6 min. 13 min. 29 min. 1 hr. 36 min. 1 hr. 20 min. 2 hr. 30 min. Calidad ECONÓMICA 18 min. 1 hr. 20 min. 1 hr. 50 min. 5 hr. 8 GB 16 GB 32 GB 1 hr. 50 min. 2 hr. 50 min. 3 hr. 45 min. 9 hr. 55 min. 3 hr. 45 min. 5 hr. 40 min. 7 hr. 30 min. 7 hr. 30 min. 11 hr. 20 min. 20 hr. 40 hr.
Precauciones ATENCIÓN: La batería que ha adquirido es reciclable. Por favor comunicarse al 1-800-8-BATTERY para información sobre como reciclar dicha batería. Adaptador de CA Si utiliza el adaptador de CA en países fuera de los EE.UU. El adaptador de CA suministrado tiene una función de selección automática de tensión en la escala de corriente alterna de 110 V a 240 V.
Para evitar que la unidad se caiga, • Ajuste bien la correa de mano. • Si utiliza la cámara con un trípode, fije bien la cámara en el trípode. Si se le cae la cámara, puede herirse usted y dañarse la cámara. Si un niño utiliza la unidad, un adulto deberá guiarle. Declaración de conformidad Número de modelo : GZ-MS120AU/BU/RU Nombre comercial : JVC Parte responsable : JVC AMERICAS CORP. Dirección : 1700 Valley Road Wayne, N. J.
Términos A B C E F G Adaptador de CA.......................................... 16, 42 Ajuste de la fecha/hora......................................... 5 Ajuste del idioma................................................ 17 Ajuste del reloj.................................................... 16 I L N Batería.......................................................... 16, 42 P Cable USB.................................................... 27, 30 Carga de archivos............................................