Instructions

31
You can play back the desired part repeatedly by
specifying a start point (A) and an end point (B).
7 When a disc is played back
1 Slide the remote control
mode selector to DVD.
2 Press ON SCREEN twice.
• The menu bar (A page 36) will be
displayed.
3 Press 2/3 (cursor) to select
.
4 Press ENTER.
5 Press 5// (cursor) to display
.
• Other repeat modes can be selected in this
step. For other repeat modes, refer to
“Playing back a DVD/CD repeatedly
(Repeat playback)” (A page 30).
6 Press ENTER at the start point
of the part to be repeated
(specifying point A).
• The icon on the menu bar will be .
7 Press ENTER at the end point of
the part to be repeated
(specifying point B).
• The icon on the menu bar will be .
will appear in the display window on the
DVD player and the part between points A
and B will be played back repeatedly.
• A-B repeat playback can be cancelled by
following the operations below.
• Press 7.
• Select and press ENTER twice.
(Select .)
NOTE
• You can use A-B repeat playback only within the
same title or track.
• You cannot use A-B repeat playback during program
playback, random playback or repeat playback.
• You cannot use the A-B repeat playback function for
some DVD VIDEOs.
You can save the settings for program playback,
random playback or repeat playback so that the
settings are activated even after the DVD player is
turned off and then on again.
Combining this function with the playback timer
(A page 43), you can make a variety of playback
settings.
1 Slide the remote control
mode selector to DVD.
2 Press CLOCK/TIMER.
• The current settings for program/random/
repeat playback will be stored.
Display on the DVD player
NOTE
• To cancel the setting save function, press CLOCK/
TIMER again.
• Opening the disc tray also cancels the setting save
function.
• Resume playback does not work when the settings
for program/random/repeat playback are saved. For
example, if the program playback settings are saved
and
F DVD is pressed to turn off the DVD player
during playback, pressing
F DVD to turn on the
DVD player again and pressing
3 (play) starts
playback of the first programmed track/chapter.
Conversely, if the program playback settings are not
saved and 3 (play) is pressed after the DVD player
is turned on, the resume playback function operates
and playback starts from the point where the disc
was stopped.
• For a JPEG/ASF/DivX/MPEG1/MPEG2 disc, you
can use the setting save function for repeat
playback only.
Playing back a specified
part repeatedly
(A-B repeat playback)
(PBC off)
OFF
A-
A-B
A-B
OFF
Saving the playback
settings for next time
Convenient functions of the DVD player (continued)
EXA10[J_C_UJ]-05.fm Page 31 Tuesday, September 6, 2005 6:07 PM