Instructions

34
Playing back DVDs/CDs
7 When a disc is played back or paused
1 Slide the remote control
mode selector to DVD.
2 Press VFP.
• The current setting will appear on the TV
screen.
• The “GAMMA” setting adjusts the
brightness of neutral tints while maintaining
the brightness of dark and bright portions.
• The “SHARPNESS” setting adjusts the
screen sharpness.
3 Press 2/3 (cursor) to select
VFP mode.
• Selecting “NORMAL” is suitable for normal
usage, and selecting “CINEMA” is suitable
for a dark room. When selecting “NORMAL”
or “CINEMA”, proceed to step 8.
• Selecting “USER1” or “USER2” enables
you to make detailed adjustment in step 4
and the later steps.
4 Press5// (cursor) to select an
item to be adjusted.
5 Press ENTER.
6 Press 5// (cursor) to change
the value.
7 Press ENTER.
• To adjust other items, go back to step 4.
8 Press VFP.
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• “VFP” stands for “Video Fine Processor”.
There are some DVD AUDIOs with a special
group, called “bonus group”, recorded.
NOTE
• You can use this function when “BONUS” lights up
in the display window on the DVD player.
7 When a disc is played back
1 Slide the remote control
mode selector to DVD.
2 Press GROUP/TITLE
repeatedly to select a bonus
group.
• “KEY_ _ _ _” appears on the TV screen,
and in the display window on the
DVD
player
.
3 Press the number buttons to
enter the pin code (4 digits).
• The method of obtaining a pin code differs
depending on the disc.
4 Press ENTER.
• When the correct pin code is entered,
“BONUS” disappears and the playback of
the bonus group starts.
• If an incorrect pin code is entered, try
entering the correct pin code again.
Adjusting the picture
quality (VFP)
GAMMA
TV screen
Example:
Playing back the bonus
group
For the locations of the remote
control buttons, refer to page 28.
EXA10[J_C_UJ]-05.fm Page 34 Tuesday, September 6, 2005 6:07 PM