Rc-qn1(J)-Cover(B).fm Page 1 Thursday, January 13, 2000 4:40 PM CD PORTABLE SYSTEM SISTEMA PORTATIL CON CD CHAINE PORTABLE A CD RC-BZ5LB/RD REMOTE CONTROL RM-SRCBZ5 INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Rc-qn1(J)-Warning.fm Page 1 Thursday, January 13, 2000 4:38 PM Warnings, Cautions and Others WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ADVERTENCIA: PARA EVITAR RIESGOS DE INCENDIOS O ELECTROCUCIONES, NO EXPONGA ESTE APARATO A LA LLUVIA O A LA HUMEDAD.
Rc-qn1(J)-e.fm Page 1 Thursday, January 13, 2000 4:32 PM English Thank you for purchasing the JVC CD Portable System. We hope it will be a valued addition to your home as well as to your outdoor life, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer.
English Rc-qn1(J)-e.fm Page 2 Thursday, January 13, 2000 4:32 PM ■ ■ Getting Started Accessories Check that you have all of the following items, which are supplied with the System. Power Cord (1) Remote Control (1) If any of these items are missing, contact your dealer immediately. How To Put Batteries How To Put Batteries In the Unit 1. Open the battery cover on the back of the Unit by pulling it toward you while pressing the tabs as shown by the arrows. 2.
Rc-qn1(J)-e.fm Page 3 Thursday, January 13, 2000 4:32 PM English Connecting the AC Power Cord Firmly insert the AC power cord supplied with the System into the AC inlet on the back of the Unit. The provided AC power cord for this unit has certain one-way direction connections to prevent electric shock. Refer to the illustration for correct connection. CAUTIONS: • ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM IN ORDER TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.
English Rc-qn1(J)-e.fm Page 4 Thursday, January 13, 2000 4:32 PM When power is supplied from the batteries: When the Unit is turned off with the POWER button on the Unit (the POWER button on the Remote Control is ineffective), the Standby indicator goes out and the display is blank. To switch off the Unit completely, remove the batteries from the Unit.
Example:Press the PRESET button until the preset number 12 “P- 12” appears. Manual Presetting (Using the Remote Control) ———————————— Number key(s) (hold for 2 seconds) ■ OR Preset Tuning using the Remote Control (Possible only after presetting stations) Select the station by entering its preset number on the number keys. • Example:For channel 5, press 5. For channel 15, press +10 then 5. • The band and the frequency are displayed. 1. Select a band by pressing the TUNER ■ BAND button. 2.
English Rc-qn1(J)-e.fm Page 6 Thursday, January 13, 2000 4:32 PM You can use Normal or Repeat Play. Repeat Play can be set to repeat all or just one of the tracks on the CD. One Touch CD Player (AC power only) —————————— ■ Just press the CD 6 button. • • The power is automatically turned on. If a CD is already inserted, “PLAY” is displayed and the CD will start playing from the first track. If no CD is inserted, “NO DISC” is displayed on the display and the CD Player remains in Stop mode.
Playback 1. Press the § STOP/EJECT button to open ■ the cassette holder. 2. Insert a cassette tape with the exposed ■ side facing upward as shown below. + Forward direction To cancel pause, press the 8 PAUSE button again. Play continues from the point where it was paused. To stop playing, press the § STOP/EJECT button. To remove the tape, stop the tape, and press the § STOP/ EJECT button again. To Fast-Forward and Rewind a Tape Press the 1 (fast-forward) button on the Unit to fast-forward the tape.
English Rc-qn1(J)-e.fm Page 8 Thursday, January 13, 2000 4:32 PM Recording an AM station (BEAT CUT) When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, you can use the BEAT CUT function. Switch the BEAT CUT switch on the back of the Unit from the NORM-1 to 2 or 3. Note: In regular use, the BEAT CUT switch should be set to the NORM-1 position.
Rc-qn1(J)-e.fm Page 9 Thursday, January 13, 2000 4:32 PM Handle your CDs carefully, and they will last a long time. Cassette Tapes Compact Discs • Only CDs bearing this mark can be used with this Unit. • Continued use of irregularly shaped CDs (heart-shape, octagonal, etc.) can damage the Unit. • • • • • • Remove the CD from its case by holding it at the edges while pressing the case's center hole lightly. Do not touch the shiny surface of the CD, or bend the CD.
English Rc-qn1(J)-e.fm Page 10 Thursday, January 13, 2000 4:32 PM ■ ■ Troubleshooting • • If you have a problem with your System, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Possible Cause Action No sound is heard. • • Unable to record. Cassette record protect tabs are removed.
Rc-qn1(J)-sp.fm Page 1 Thursday, January 13, 2000 4:35 PM Gracias por comprar el reproductor de CD portátil JVC. Esperamos que lo disfrute al máximo y durante muchos años, esté donde esté, tanto dentro como fuera de casa. Asegúrese de leer detenidamente este manual de instrucciones antes de utilizar el sistema estéreo. En él encontrará toda la información que precisa para configurar y utilizar el sistema. Si tiene alguna duda no tratada en este manual, póngase en contacto con su distribuidor.
Rc-qn1(J)-sp.fm Page 2 Thursday, January 13, 2000 4:35 PM ■ ■ Cómo empezar Accesorios Español Compruebe que tiene todos los elementos siguientes, suministrados con el sistema. Cable de alimentación (1) Mando a distancia (1) Si faltara alguno de estos artículos, contacte de inmediato con su proveedor. Cómo colocar las pilas Cómo colocar las pilas en el mando a distancia 1.
Rc-qn1(J)-sp.fm Page 3 Thursday, January 13, 2000 4:35 PM Conexión del cable de alimentación principal CA Inserte el cable de alimentación principal CA (suministrado) firmemente en la toma CA de la parte posterior del sistema. El cordón de CA suministrado con esta unidad tiene ciertas conexiones en un solo sentido para prevenir electrochoques. Refiérase a la ilustración para su conexión conecta.
Rc-qn1(J)-sp.fm Page 4 Thursday, January 13, 2000 4:35 PM ■ Para apagar el equipo completamente, desenchufe el cable de alimentación de la toma de corriente. Efectos sonoros (SOUND) El sistema cuenta con los efectos sonoros que se detallan a continuación. Con ellos podrá controlar las características de la música para ajustarlas a la acústica de la sala y a la calidad de la fuente de audio. Pruebe todos los efectos sonoros para saber de qué manera afectan a la música.
Rc-qn1(J)-sp.fm Page 5 Thursday, January 13, 2000 4:35 PM Presintonización manual (con el mando a distancia) ————————— Sintonice con el mando a distancia las presintonías (sólo cuando se hayan presintonizado emisoras). Seleccione la emisora introduciendo el número de presintonía en las teclas numéricas. • Ejemplo: Para el canal 5, presione el 5. Para el canal 15 presione +10 y luego el 5. • Se visualizan la banda y la frecuencia. Tecla(s) numérica(s) (pulsar durante 2 segundos) 1.
Rc-qn1(J)-sp.fm Page 6 Thursday, January 13, 2000 4:35 PM Puede utilizar la función Normal o Repetida. La Reproducción Repetida se puede ajustar para que repita todas las pistas o sólo una de las pistas del CD. Reproducción de CD mediante un sólo botón (Sólo corriente alterna (CA)) — ■ Sólo tiene que presionar el botón 6 del CD. Español • • El equipo se enciende automáticamente. Si ya hay un CD insertado, en la pantalla aparecerá el mensaje “PLAY” y comenzará la reproducción desde la primera pista.
Rc-qn1(J)-sp.fm Page 7 Thursday, January 13, 2000 4:35 PM 4. Presione el botón TAPE PLAY. ■ 1. Presione el botón § STOP/EJECT para ■ abrir el compartimento del casete. 2. Inserte la cinta con la cinta magnética ■ hacia arriba, como se muestra en la ilustración. + Hacia delante • Se reproduce la cinta y se para cuando llega al final. Para hacer una pausa, presione el botón 8 PAUSE del equipo. Para cancelar la pausa, presione el botón 8 PAUSE otra vez.
Rc-qn1(J)-sp.fm Page 8 Thursday, January 13, 2000 4:35 PM Español Cómo grabar una emisora AM (con reducción de interferencias BEAT CUT) Cuando se grabe una emisora de AM, se pueden producir pulsaciones no audibles mientras se escucha la emisora. Si ésto sucede, utilice la función BEAT CUT. Cambie el interruptor BEAT CUT (reducción de interferencias) que se encuentra en la parte trasera del equipo de la posición NORM-1 a la posición 2 ó 3.
Rc-qn1(J)-sp.fm Page 9 Thursday, January 13, 2000 4:35 PM ■ ■ Cuidado y mantenimiento Discos compactos • Sólo se pueden utilizar en este equipo los CD que lleven este distintivo. • El uso continuado de discos de perfil irregular (en forma de corazón, octogonales, etc.) puede dañar el equipo. • • • • • • Cintas de casete Extraiga los discos de la caja sosteniéndolos por el borde y haciendo un poco de presión en la sujeción central de la caja. No toque la superficie brillante del CD ni lo doble.
Rc-qn1(J)-sp.fm Page 10 Thursday, January 13, 2000 4:35 PM ■ ■ Solución de problemas • • Si tiene problemas con su sistema, compruebe en esta lista la posible solución antes de acudir al servicio técnico. Si no puede solucionar el problema o si el sistema se ha dañado físicamente, avise a un técnico cualificado, como por ejemplo su distribuidor oficial, para que lleve a cabo la reparación. Español Síntoma No se oye ningún sonido. Causa posible • • • No puede grabar. La recepción de radio es pobre.
Rc-qn1(J)-fr.fm Page 1 Thursday, January 13, 2000 4:34 PM Merci d’avoir fait l’acquisition de la chaîne portable avec lecteur CD de JVC. Nous espérons qu’elle représentera un atout supplémentaire pour votre foyer ainsi que lors de vos sorties et qu’elle vous enchantera des années durant. Veuillez lire attentivement le présent manuel d’utilisation avant de faire fonctionner votre nouvelle chaîne stéréo. Vous y trouverez toutes les informations nécessaires pour installer et utiliser la chaîne.
Rc-qn1(J)-fr.fm Page 2 Thursday, January 13, 2000 4:34 PM ■ ■ Pour commencer Accessoires Vérifiez si tous les éléments suivants, fournis avec la chaîne, sont inclus. Cordon d’alimentation (1) Télécommande (1) Si l’un de ces éléments fait défaut, veuillez contacter immédiatement votre revendeur. Français Mise en place des piles Comment installer les piles dans l’appareil 1.
Rc-qn1(J)-fr.fm Page 3 Thursday, January 13, 2000 4:34 PM Raccordement du cordon d’alimentation secteur Introduisez fermement le cordon d’alimentation secteur fourni dans la borne secteur située au dos de l’appareil. Le cordon d'alimentation secteur fourni avec cet appareil ne peut étre branché que dans un seul sens afin d'evier tout risque de choc électrique. Se référer á l'illustration pour le raccorder correctement.
Rc-qn1(J)-fr.fm Page 4 Thursday, January 13, 2000 4:34 PM Lors du fonctionnement sur piles: Lorsque vous éteignez l’appareil à l’aide de sa touche POWER (la touche POWER de la télécommande ne fonctionne pas), le témoin Standby s’éteint et l’affichage est vierge. Pour éteindre complètement l’appareil, retirez les piles du logement: après environ cinq minutes.
Rc-qn1(J)-fr.fm Page 5 Thursday, January 13, 2000 4:34 PM Présélection manuelle (à l’aide de la télécommande) —————————————— OU Recherche des présélections à l’aide de la télécommande (Possible uniquement après la présélection des émetteurs) Sélectionnez l’émetteur en entrant son numéro de présélection sur les touches numériques. • Exemple: Pour l’émetteur 5, appuyez sur 5. Pour l’émetteur 15, appuyez sur +10 puis sur 5. • Sa bande et sa fréquence s’affichent.
Rc-qn1(J)-fr.fm Page 6 Thursday, January 13, 2000 4:34 PM Vous pouvez utiliser les fonctions de lecture normale ou de lecture répétée. La lecture répétée permet de répéter toutes les plages ou juste une plage du disque compact. • Lecture par une seule touche (alimentation secteur uniquement) — ■ Appuyez sur la touche CD 6. Pendant la lecture, appuyez sur la touche 4 ou ¢ pour sélectionner la plage souhaitée. La lecture de la plage choisie commence.
Rc-qn1(J)-fr.fm Page 7 Thursday, January 13, 2000 4:34 PM Lecture 1. Appuyez sur la touche § STOP/EJECT ■ pour ouvrir le porte-cassette. 2. Insérez une cassette avec la partie de la ■ bande exposée tournée vers le haut, comme indiqué ci-dessous. + Direction avant 4. Appuyez sur la touche TAPE PLAY. ■ • La lecture de la cassette a lieu puis la cassette s'arrête lorsqu'elle arrive à la fin de la bande. Pour mettre en pause, appuyez sur la touche 8 PAUSE de l’appareil.
Rc-qn1(J)-fr.fm Page 8 Thursday, January 13, 2000 4:34 PM Pour arrêter l’enregistrement, appuyez une fois sur la touche § STOP/EJECT. Pour sortir la cassette, arrêtez-la et appuyez à nouveau sur la touche § STOP/EJECT pour ouvrir le porte-cassette. Enregistrement d’un émetteur AM (BEAT CUT) ———————————— Lors de l’enregistrement d’une émission AM, vous pourriez entendre des parasites qui ne sont pas audibles lorsque vous écoutez l’émission. Dans ce cas, vous pouvez utiliser la fonction BEAT CUT.
Rc-qn1(J)-fr.fm Page 9 Thursday, January 13, 2000 4:34 PM ■ ■ Entretien - Divers Prenez grand soin de vos CD afin d’assurer leur bon et long fonctionnement. Cassettes Si la bande n’est pas tendue, elle risque de s’étirer, de se couper ou de se coincer dans le mécanisme de la platine. Insérez alors un crayon dans un des axes et tournez dans la bonne direction pour la retendre. • L’utilisation continue de CD de formes irrégulières (en forme de coeurs, octogonaux, etc.
Rc-qn1(J)-fr.fm Page 10 Thursday, January 13, 2000 4:34 PM ■ ■ Dépistage des défaillances • • Si votre chaîne présente certaines défaillances, vérifiez la liste ci-dessous pour y trouver un remède possible avant d’appeler le service technique. Si vous ne parvenez pas à résoudre le problème avec ces indications, ou si la chaîne a été endommagée, demandez l’intervention technique d’une personne qualifiée, comme votre revendeur. Symptôme Pas de son.
Rc-qn1(J)-Back cover.