LT-Z70/56RX5 / LCT1911-001A / All Cover HD-Z70&56RX5_Eng.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 1 Wednesday, August 24, 2005 10:30 AM Introduction Thank you for buying this JVC projection television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. ENGLISH LAMP/PROGRAM POWER The most amazing picture imaginable is what you will see with JVC's HD-ILA Rear Projection Television.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 2 Wednesday, August 24, 2005 10:30 AM Warnings Please follow all the guidelines below. Never insert objects into the cabinet openings! It may cause a fatal electric shock. Take care when children are near. ENGLISH Never dismantle the rear panel! Never place anything on the TV! It may cause an electric shock. Never obstruct the ventilation holes! Placing liquids, naked flames, cloths, paper, etc. on the TV may cause a fire.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 3 Wednesday, August 24, 2005 10:30 AM Warnings Installation requirements To avoid overheating, ensure the unit has ample room. 200 mm ENGLISH 150 mm 200 mm 150 mm 50 mm LAMP/PROGRAM POWER In order to use the television for a long time This television uses a lamp to project the picture onto the screen.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 4 Wednesday, August 24, 2005 10:30 AM CONTENTS Introduction ..................................................................... 1 Warnings .......................................................................... 2 Setting up your TV .......................................................... 5 ENGLISH Installation.................................................................................
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 5 Wednesday, August 24, 2005 10:30 AM Setting up your TV Installation Connecting the aerial and video cassette recorder (VCR) Insert the AC plug on the power cord from the TV into AC outlet. Caution • Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit. ENGLISH Cautions for installation • Install the TV in a corner, against a wall or on the floor so as to keep cords out of the way.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 6 Wednesday, August 24, 2005 10:30 AM Setting up your TV Initial settings (Setup tour) When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings. 4 Press the 6 buttons to choose ENGLISH. Then press the a button The TELETEXT LANGUAGE menu appears.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 7 Wednesday, August 24, 2005 10:30 AM TV buttons and functions ENGLISH LAMP/PROGRAM POWER LAMP TV/VIDEO POWER IN (VIDEO-4) MENU/OK Refer to the pages in parentheses for details.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 8 Wednesday, August 24, 2005 10:30 AM Remote control buttons and functions 1 ~ ! ENGLISH 2 3 4 5 6 7 8 9 0 = @ # $ % ^ & * ( Turning the TV on or off from standby mode Press the # (standby/on) button to turn the TV on or off When the TV is turned on, the power lamp lights up blue. • The power can be turned on by pressing the 4 button, 6 p buttons or Number buttons.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 9 Wednesday, August 24, 2005 10:30 AM Remote control buttons and functions To return to a TV channel: Press the 4 button, the 6 p buttons or the number buttons. Adjusting the volume Press the 7 q buttons to adjust the volume. The volume level indicator appears and the volume changes as you press the 7 q buttons. Muting the sound Press the l (muting) button to turn off the sound.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 10 Wednesday, August 24, 2005 10:30 AM Remote control buttons and functions Choose the ZOOM mode 1 Press the c button to display the ZOOM menu ZOOM ENGLISH AUTO REGULAR PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUBTITLE FULL OK 2 Press the 6 buttons to choose a ZOOM mode. Then press the a button The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 11 Wednesday, August 24, 2005 10:30 AM Remote control buttons and functions Using the “Multi-picture” function 1 Set the VCR/TV/DVD switch to the TV position When using the “Multi-picture” function, set the VCR/TV/DVD switch to the TV position. 1 2 12 3 Press the 5 buttons to choose the number of screens and then press the a button 1 Choose to return to one screen. 2 Choose to change to 2-pictures multi.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 12 Wednesday, August 24, 2005 10:30 AM Remote control buttons and functions Favourite channel function You can register your favourite TV channels (PR 1 – PR 99) in the number buttons 1 to 4. After registering, the channel can be called by pressing the d (favourite) button and a number button 1 to 4.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 13 Wednesday, August 24, 2005 10:30 AM Teletext function Hold You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the C (Hold) button To cancel the Hold function: Press C (Hold) button again. ENGLISH Hold indication VCR/TV/ DVD Sub-page Some teletext pages include sub-pages that are automatically displayed.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 14 Wednesday, August 24, 2005 10:30 AM Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’s functions, you need to understand the basic menu operating techniques fully.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 15 Wednesday, August 24, 2005 10:30 AM PICTURE menu COLOUR PICTURE STANDARD You can adjust the picture colour. 2 : lighter 3 : deeper COOL RESET TINT OK • While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, TINT settings to their default settings.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 16 Wednesday, August 24, 2005 10:30 AM PICTURE menu FEATURES Choose FEATURES and press the a or 3 button to display the submenu. > FEATURES ENGLISH DIGITAL VNR Super DigiPure PULL DOWN COLOUR MANAGEMENT PICTURE MANAGEMENT SMART PICTURE COLOUR SYSTEM 4:3 AUTO ASPECT AUTO(LOW) AUTO AUTO ON ON ON OK DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original picture.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 17 Wednesday, August 24, 2005 10:30 AM PICTURE menu COLOUR SYSTEM 4:3 AUTO ASPECT The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. 1 Choose COLOUR SYSTEM. Then press the a or 3 button The sub-menu of the COLOUR SYSTEM function appears.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 18 Wednesday, August 24, 2005 10:30 AM SOUND menu CINEMA SURROUND SOUND STEREO/ BASS TREBLE BALANCE CINEMA SURROUND BBE OFF OFF ENGLISH OK • When the headphones are connected, only “STEREO / I • II” can be used. STEREO / I • II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II).
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 19 Wednesday, August 24, 2005 10:30 AM FEATURES menu 3 Press the a button The Sub-menu of CHANNEL GUARD appears. FEATURES SLEEP TIMER CHANNEL GUARD APPEARANCE BLUE BACK CHILD LOCK AUTO SHUTOFF FAVOURITE SETTING ILLUMINATION > CHANNEL GUARD TYPE A ON OFF OFF SOFT ID CH/CC GUARD OK OK SLEEP TIMER You can set the TV to automatically turn off after a set period of time. 1 Choose SLEEP TIMER.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 20 Wednesday, August 24, 2005 10:30 AM FEATURES menu APPEARANCE Press the 5 button and choose the format in which the channel number is displayed from the four types: TYPE A, TYPE B, TYPE C, and TYPE D. ENGLISH • The TV is set to TYPE D when shipped from factory. TYPE D sets all screens to semitransparent. The menu screens are not semitransparent when set to a type other than TYPE D.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 21 Wednesday, August 24, 2005 10:30 AM SET UP menu EDIT/MANUAL SET UP VIDEO VIDEO OFF OK AUTO PROGRAM You can register the TV channel automatically. This function is same as step 5 and 6 of the “Initial settings (Setup tour)” on page 6. 1 Choose AUTO PROGRAM, then press the a or 3 button The AUTO PROGRAM function starts. The TV channels you receive are automatically stored in the programme numbers list.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 22 Wednesday, August 24, 2005 10:30 AM SET UP menu MOVE 1 Press the 6 buttons to choose a TV channel 2 Press the 3 button to start the MOVE function > EDIT PR CH/CC ID ENGLISH CH 21 OK STORE 3 Press the 6 buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel To cancel the INSERT function: Press the b button. 4 Press the number buttons to enter the remaining CH/CC number The TV shifts to registration mode.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 23 Wednesday, August 24, 2005 10:30 AM SET UP menu LANGUAGE The LANGUAGE setting which was performed in the “Initial settings (Setup tour)” (page 6) can be changed. There are four types of teletext language groups. Set the teletext language group that corresponds to the language of the teletext programme that you want to watch.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 24 Wednesday, August 24, 2005 10:30 AM Additional preparation Connecting external equipment You can connect many different devices to the TV. Please read the user manual of each device before setting up. (Connecting cables are not supplied with this TV.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 25 Wednesday, August 24, 2005 10:30 AM Additional preparation • When you connect S-VIDEO cable to IN(VIDEO-1), IN(VIDEO2), or IN(VIDEO-4) terminal, S-VIDEO signal has priority over composite video signal. • When you connect component video cable to IN(VIDEO-1) or IN(VIDEO-3) terminal, you have to set the “VIDEO-1 SETTING/ VIDEO-3 SETTING” to “COMPONENT” (See page 23). IN(VIDEO-1) Watching videos.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 26 Wednesday, August 24, 2005 10:30 AM Troubleshooting Severe noise or snow ENGLISH • Is the TV connected correctly to the aerial ? • Change the direction of the aerial. • Is the aerial or its cable damaged ? \ Consult your retailer. LAMP/PROGRAM POWER Patterns, stripes or noise I can't turn it on! • Is the aerial receiving interference from highvoltage power lines or wireless transmitters ? \ Consult your retailer.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 27 Wednesday, August 24, 2005 10:30 AM Troubleshooting Problem Actions Page — Black or white dots appears on the screen • Although the HD-ILA element is manufactured with highprecision technology, please understand that some pixels may be lost or permanently displayed. — Poor picture quality • Unnatural colour >>> Adjust COLOUR and BRIGHT. Check your COLOUR SYSTEM. • Noise >>> Set to the following functions.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 28 Wednesday, August 24, 2005 10:30 AM Technical Information Problem Functions ENGLISH Actions Page Some functions do not work • It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation. — Some inputs cannot be selected in the subpicture • VIDEO-4, VIDEO-5 and PC mode cannot be selected in the subpicture. — The followings are not malfunctions.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 29 Wednesday, August 24, 2005 10:30 AM CH/CC numbers When you want to use the INSERT function on page 22, find the CH/CC number corresponding to the Channel number of the TV channel from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 30 Wednesday, August 24, 2005 10:30 AM Appendix Changing the Lamp WARNING! It is very important that you NEVER TOUCH THE GLASS SURFACE OF THE NEW LAMP. Touching the glass surface will deposit oils from your hand onto the lamp surface. When the lamp heats up to its operating temperature, the oil will cause a difference in temperature on the lamp surface that will likely cause the lamp to break.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 31 Wednesday, August 24, 2005 10:30 AM Appendix How to Replace the Lamp Please read these instructions fully before attempting to replace the lamp. If you feel unsure about replacing the lamp yourself, call a service technician. Please observe all safety warnings. 4 Remove the lamp unit. Using a Philips head type screwdriver (cross-head type), loosen the two screws fastening the lamp unit.
LT-Z70/56RX5 / LCT1911-001A / English HD-Z70&56RX5_Eng.book Page 32 Wednesday, August 24, 2005 10:30 AM Specifications Model HD-Z70RX5 HD-Z56RX5 Type HD-ILA Device Projection Broadcasting systems B, G, I, D, K, K1, M Colour systems Channels and frequencies PAL, SECAM, NTSC 3.58/4.43 MHz ENGLISH VHF low channel (VL) = 46.25 to 168.25 MHz VHF high channel (VH) = 175.25 to 463.25 MHz UHF channel (U) = 471.25 to 863.
LT-Z70/56RX5 / LCT1911-001A / All Cover HD-Z70&56RX5_Eng.