ENGLISH WIDE LCD PANEL TV INSTRUCTIONS Contents PREPARATION Safety precautions ............................... 2 Remote control buttons and functions ... 3 Set up and connections ....................... 4 Initial settings ....................................... 6 Registering / Editing channels ............. 6 FUNCTIONS Picture setting ...................................... 7 Sound setting ...................................... 9 Useful functions ................................. 10 Viewing Teletext ......
Thank you for buying this JVC LCD panel television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Follow this manual regarding setup! - Connect only to a 110-240 V, 50/60Hz AC outlet. • Make enough room for inserting and removing the power plug! • Place the TV as close to the outlet as possible! - The main power supply for this TV is controlled by inserting or removing the power plug.
Remote control buttons and functions • Insert the batteries Use two “AAA/R03” dry cell batteries. Insert the batteries from the · end, making sure the · and ª polarities are correct. WARNING: Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like. “AAA/R03” Batteries If this symbol is shown, it is only valid in the European Union. RETURN PLUS function Return to the frequently viewed channel.
Set up and connections LT-32EX19 Connect an aerial and VCR / DVD Player TV/VIDEO MENU/OK CHANNEL Power lamp ON : Lit (Blue) OFF : Unlit Power lamp lights while the TV is on. • “Power Lamp” (P. 11) Remote control sensor VOLUME L V VIDEO-2 Volume / Adjust Power On / Off To Headphone (P. 5) OR Care when setting VCR (DVD Player) • After all the connections have been made, insert the plug into an AC outlet.
Set up and connections (continued) VIDEO-1 Watching videos You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.) Output LT-32EX19 Headphones HDMI-1 HDMI-2 HDMI-3 DIGITAL VIDEO/AUDIO To “HDMI-1” Input • Composite signal / Component signal (P. 16) • Sound L / R • Use Component signal “Video - 1 Setting” (P. 12) HDMITM Connector.
Initial Settings Registering / Editing channels You can edit the channel list or register new channel manually. 1 Turn on the TV OK JVC logo appears 2 > • Show only when powering on for the first time. • The power on the unit can also be used. ID Move Select a language > Language 1. Select ®ÅËAÈÌ×ÅA Castellano Melayu Français 0YCCÅÃÄ ไทย Tieáng Vieät 3 2. Set ID Select the Teletext language group > 1.
Picture setting 2. Select item and setting or adjust 1. Select Picture MENU OK 2. Enter • To enter an items menu 1. Select 2. Adjust 0ICTURE 0ICTURE -ODE "ACKLIGHT #ONTRAST "RIGHTNESS 3HARPNESS #OLOUR 4INT 7HITE "ALANCE &EATURES 1. Display “Picture” menu "RIGHT OK 1. Select OK 3. Finish 2. Enter #OOL You can select a preset picture setting according to your favour. Bright : Hightens contrast and sharpness. Picture Mode Game Mode : Adjust sharpness of the picture when play the game.
Picture setting (continued) Finer Picture adjustment &EATUREA #LEAR 3$ $IGITAL 6.2 $IGI0URE 0ULL $OWN #OLOUR -ANAGEMENT 0ICTURE -ANAGEMENT 3MART 0ICTURE $YNAMIC "ACKLIGHT -0%' .OISE 2EDUCTION #OLOUR 3YSTEM :OOM /FF /FF /FF /FF /FF /FF /FF /FF /FF : For clearly picture (Off / Mode-1 / Mode-2) When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot operate. Clear SD Features : Reduce the amount of noise in original picture.
Sound setting 1. Display “Sound” menu. 2. Select item and setting or adjust. Stereo/I■II Sound Meister Treble Bass Surround Balance Voice Enhancer Al Volume Sound OK 2. Enter Stereo/I II ■ Sound Meister D < I II Mono Off 3. Finish Select the broadcast sound stereo, mono or bilingual language (u: Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono) Ambience (Off / Dynamic / Pure / Living) Compensates high frequencies to widen the frequency band.
Useful functions 1. Display “Features” menu. MENU Features 1. Select On Timer Sleep Timer Channel Guard Blue Back Child Lock Auto Shutoff Favourite Setting Power Lamp Eco Mode OK Features 2. Enter 1. Select PR channel that you want to watch. TV to turn on automatically from standby mode at a set channel and time. PR On Timer 02 >> 00 : 00 Off 2. Enter 3. Finish Off Off OK 1 2 3 4 5 6 7 8 9 0 OK 3. Set 2. Select item for reset time setting. 1.
Useful functions (continued) Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (On / Off) Child Lock Disables the side control buttons of the TV. (On / Off) Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (On / Off) Delete the favourite channel that you registered. > Favourite Setting Favourite Setting 1 2 3 (Blue) 1.
Viewing Teletext Watching Video or DVDs Select the input Source. You can watch the Teletext broadcast channel with Text Functions. 2. Select a Teletext page by press number button (0-9) 1. Select !6 3ELECT TV/VIDEO TV mode <--> TEXT mode 1. !6 6IDEO 6IDEO ($-) ($-) ($-) 0# OK 2. Set • Operate the connected device and play video. CHANNEL • Move up or down a page by 1. Select “Set Up” 1. Select MENU Bookmark your favourite page.
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. Severe noise or snow Page Check the aerial cable and TV connections . P. 4 Check the direction of the aerial. P. 4 Check the aerial or its cable damaged or not. -- Patterns, stripes or noise Interference caused by devices such as an amplifier, personal computer, or a hair drier, Move it away from TV.
Technical information Language group for Teletext Group PC Signals that can be displayed • Languages Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech, Slovak, English, German Group-4 Arabic, Czech, Slovak, Hungaria
CH / CC List To use the Insert function (P. 6), find the “CH/CC” number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
Specification Main unit Model Broadcasting systems Terminals / Connectors LT-32EX19 LT-32BX19 Colour systems PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz Channels and frequencies VHF low channel (VL) = 46.25 to 140.25 MHz VHF high channel (VL) = 147.25 to 423.25 MHz UHF channel (U) = 431.25 to 863.25 MHz Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41).