JVC COMPACT COMPONENT FS" 5--Consists ofCA-FSG5 andSP-FSG5 G SYSTEM \ \ m io o oi iiooSo o DIGITAL AUDIO INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Warnings, Cautions and Others Mises en garde, precautions et indications CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. diverses CAUTION-- (b/I (standby/on) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The VII button in any position does not disconnect the mains line.
For the main unit: Note to CATV Declaration of Conformity Model Number: Trade Name: Responsible Party: Address: FS-G5 JVC JVC Americas Corp. 1700 Valley Road, Wayne New Jersey 07470 Telephone Number: 973-317-5000 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT FOR LASER PRODUCTS 1 CLASS 1 LASER PRODUCT 2 CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3 CAUTION:Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4 REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT. IMPORTANT POUR PRODUITS LASER 1 PRODUIT LASER CLASSE 1 2 ATTENTION: N'ouvrez pas le couvercle superieur.
Introduction ........................................................ Precautions .......................................................................... How to Read This Manual .................................................. Getting Started ................................................... 2 2 2 3 Step 1: Unpack .................................................................... 3 Step 2: Prepare 3 tire Remote Control ................................... Step 3: Hook Up .............
• If you are not going to operate the System for an extended period of time, unpklg the AC power cord fi'omthe wall outlet. e ecautiOn Installation If auything goes wrong, unplug the AC power cord and consult your dealer. • Install ill a place which is level, dry and neither too hot nor too cold--between 5°C and 35°C (41 °F and 95°F). • Install the System prevent internal in a location heat buildup with adequate ventilation This Ma ai to inside the System.
step pnp Q After unpacking, following check to be sure that you have all the items. The number quantity of each piece • FM autenua (1) in parentheses indicates the supplied. • AM loop antenua (1) • Remote control (1) • Batteries (2) If any item is missing, Steg2:erel]a Insert the batteries polarity consult your dealer immediately. the RemoteiGo !re! into the remote control by matching the (+ and -) correctly.
!_p_ N_ku_ii_i!lliiiliii iiiii!!_i '_i!li!i;i iiiiiii!_ _iiiiiiii _i!!i!!i!i_!! iil!lilil '¸_!iii!iiiiii i_i!!iiii' iiii!i!!!t_ ¸_i!iiiiiiiiii_ _i_i_ii_ ;lii!iiiii iillliiii_ _iiiii!_ i!lliiiliii iiiii!!iiii!;! i!!!!i!!!_ ilil!i!!!iiii_ ;lii!iiii_ ¸¸!!iliiiii!i!i ¸i̧illlilil '¸_iii_ If you need more detailed information, see page 6. Illustrations of the input/output terminals below are typical examples.
FM antenna (supplied) '"' • Extend it so that you can obtain the best reception. AM loop antenna (supplied) Turn it until the best reception is obtained.
To assembleand connectthe AM loopantenna To connect To assemble Make sure to conuect the wire correctly: AM EXT, the black end to GND. the AM loop antenna the AM loop antenna Tile white end to @ Hold Insert (3) Release_ • If the AM loop antenua wire or speaker with vinyl, remove the vinyl to expose antenna the vinyl. by twisting cords are covered tile tip of tile • Make sure the autenua conductors do not touch ally other terminals, connecting cords and power cord.
The indications Before on the display operating the System, teach you a lot of things while be familiar with you are operating when and how the indicator [] j D sc tray the System. illuminates on the display. nd caters • 1-5: Disc tray number • _ : Tray indicator -Lights when the disc is detected. -Blinking while playing back a disc. Goes off when there is no disc in the tray. • ): Shows the current disc. MP3 indicator • Lights when an MP3 disc is detected.
[_ Turn on the power. Tile STANDBY • Without lamp on tile main unit turns oft" pressing STANDBY/ON V/I, tile System turns oil by pressing one of the source buttons ill the next step. Numeric buttons_ [_ Select the source. Playback m,m,_,-/_,-m,.t ready selecting automatically starts if tile selected • If you press AUX or USB, start playback the external Disc selection buttons-- [] Adjust [] Operate later. FM MODE/-MP3 o source is source on to start. component. the volume.
US[_iltg toiIh_Radi_}_:: _ :::::: To preset the stations _>>) Toselecttheband(FlVlor AM) You call preset 1 Tune FM _ 2 AM q 30 FM and 15 AM stations. in to a station Activate the preset you want number to preset. entry mode. ] SET "3 F" To tune in to a station • Finish While FM or AM is selected... tile following display 3 Select a preset number @@@ ®®® @®® Frequency starts changing When a station on the display.
To tune in to a preset station _>) 1 Select a band To select a disc to be played back (FM OF AM). CD4 FM _ 2 Select a preset number AM q Iltw,.. ,,..-_ for the station you store. litton.,, • You carl also use tbe PRESET UP or PRESET DOWN. .Q Q Q CD5 To release, press again. ® To select a track/group* Irrmcr_ae;eS tile track/group Playing Back aD sc { :{{, '_' uumbers.
tromth PG,, For IVlP3playback According to the MP3 playback I=,._/_1_t selection mode, I-
5 The USB drivers are installed • If the USB drivers install the USB drivers PC' s monitor. 6 Check 1 if the drivers 2 following automatically, tire instructions are correctly Open the Control [Control automatically. are not installed oil tire By using all stereo mini plug cord (not supplied), installed.
Adlusli_ [he :vold_e, You carl adjust the vohune level 31 (VOL-MAX). iiiiiiil iiiiiiil iiiiiiil _t_t'lll_ _'RIITI 1! :;:;;;::: : level from level 0 (VOL-MIN) to I *IxlRII_tlTRIII OiOO VOLUME CLOCK/ ..... TIMER To drop PRESET DOWN the volume FADEMUTING in a moment _))) To restore the volume, press again, or adjust the volmne level. DIMMER FADE A.
Cha_oingthe DisplayBri htneS_ DIMMEB If there You carl dim the display need to set the clock again. d_ z !i,{_ _i!iia.̧ _g _.{' kd _'_¸ % ,_' &,> %.¸#¸¸¸ window. DIMMER-I-_DIMMER-2-'I DIM OFF *----------J _(_ "- _, (Canceled) is a power failure The clock loses the setting and is reset to "AM 12:00." {_:r{i]ngDII|he:Powe ,; ::;::, &,,,: _tGNatjcally ] ,',, You :::::;: To turn off the Systemafter playbackis over-DIMMER-1 Dims the display DIMMER-2 Erases illumination.
Programming ibe elayin_Orde iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiii Numeric-iiiiiiii iiiiiiil buttons iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiii CU I_/11 -iiiiiiii iiiiiii! iiiiiiiiDisoseleoti0n, iiiiiiil buttons iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiiil iiiiiii! You can arrange before the playing order of the tracks (up to 32
To checkthe programmedcontents While the PRGM before playback... indicator is shown on the display Playing_] Rand_m_nd_mPIJ_ and You call play back all tile tracks on the selected random. { In the l)rogrammed order. • You call repeat the current 1 Select a disc by pressing 2 RANDOM. Press disc by pressing disc at REPEAT. CD 1 - CD 5.
You can repeat playback. You call lock tile disc trays so that no one call eject tile loaded discs. For CD: • This is possible While c:_1"_ Canceled \ _ For MP3 _ (Track For MP3 -_---_ALL _ the disc trays are closed... -] i JQJ-i/ILL_LFk_ mode): '\\_ _ -- i_> c:_CD L__Canceled _ _ _ ALLI (at the same time) • Only CD I A call work for this fanction. (No indication) (Group To cancel mode): I-* GR._ the prohibition, _'- _ALL_--J Repeats the current c_CD Repeats disc.
iiiiiiiiRemote control iiiiiii! iiiiiiii iiiiiiii iiiiiiii iiiiiiii iiiiiiii iiiiiiii iiiiiiii iiiiiiii Using Daily Timer, you can wake up with nmsic, • You can store three Daily Timer settings; activate only one of Daily Timers • To exit from the timer setting, etc. however, you can at the same time. press CLOCK/TIMER as required. • To correct a misentry during the process, You can return to the previous press CANCEL. step.
2 Make the timer setting @ then the minute Set the hour To turn off the Timer after its setting is done as you want. for on-time. Since Daily Timer is activated you may need to cancel PRESETUP [J_ Select the playback "TUNER sourceI"TUNER AM," "CD," or "AUX [J_ PRESET DOWN " U ¢ selecting "P When Select a preset PRESET to cancel. Daily1 TimerH Daily2 Timer }..>[ _aily3 Timerh Canceled_ ::;:l::i:i_il _41 f_'* off the selected Timer. nmnber The nmnber indicator is turned oft'.
Daily Operations--Sound& OtherAdjustments (see pages Daily Operations--Playback(see pages 8 to 12) Listening to the Radio: • If you store a new station into an occupied preset number, the previously stored station in that number will be erased. • When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.
Timer Operations: If you are having a problem with your System, check this list ff)r a possible solution before calling for service, Daily Timer does not work. c=)The System has been turned oil when tile on-time comes. Timer starts working only when the System is turned off. General: Adjustments or settings are suddenly canceled before you finish. =:>There is a time linfit. Repeat tile procedme again. Operations are disabled.
S_e_i_icat i_ns i ;;;;;: Amplifiersection Output ::::;;: Refer to the pages to see how to use the buttons and controls. Power: 90 W per channel, rain. RMS, driven into 6 f) at 1 kHz with no more than 10% total harmonic distortion. Speakers Audio Parts hnpedance: Input 6 f_- AUX: USB: Remote control 16 _ 400 mV/50 k£) USB Ver. IA Tuner section FM tuning AM tuning range: 87.5 MHz - 108.
TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOWTO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEEDTO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES? ® iS HERE TO HELP! TOLL FREE: 1(800)252-5722 http://www.jvc.com Remember to retain your Bill of Sale for Warranty Service.
JVC ** LIMITEDWARRANTY ** AUDIOq * ,k JVC COMPANY OF AMERICA (JVC) warrants this product and all parts thereof, except as set forth below ONLY "* TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from Yr ,* the date of original purchase for the period shown below.
"11 oi 0 0 "0 0 --i 0 0 "0 0 z rn z .H JVC "_ .