User Manual

12
■ INPUT : Select an input source for main screen (VIDEO1, VIDEO2, S-VIDEO, RGB PC, HDMI)
■ LANGUAGE : Set to different language mode (ENGLISH, ITALIAN, FRENCH, SPANISH, GERMAN)
■ SOUND MUTE : Turn on/off the sound
* While “SOUND MUTE” is "ON", displays each changing the input source
* After turn off(stand-by mode), “SOUND MUTE” turns to “OFF”.
■ KEY LOCK : Locking the button on the front panel. (Prevent operation)
* Press ▲ &
◀ buttons simultaneously for 5 seconds and turning “KEY LOCK” to “OFF”.
* After turn off(no AC power supply ), turning “KEY LOCK” to “OFF”.
■ NOISE REDUCTION : Set a noise reduction mode
■ OSD TIME : Set a time duration of OSD menu (5s – 30s : Default setting is 15s)
■ DEFAULT : Factory default setting.
■ NO SYNC ACTION : Set the monitor to turn into Stand-by mode when no sync status continues for about 15 minutes
* NO SYNC ACTION item is for the VIDEO1 / VIDEO2 / S-VIDEO / HDMI input only
*Use "POWER SAVING" mode in RGB PC input
*When turn on, displays “No sync action worked” in a few seconds by this setting.
■ NO OPERATION : Set the monitor to turn into Stand-by mode when no operation status continues for about 4 hours.
*In case of continue to use over 4 hour, change to “OFF”. (Default setting is “ON”.)
*When turn on, a few seconds displays “No operation action worked” in this setting.
■ HDMI AUDIO : Set the output of HDMI AUDIO
DIGITAL – Output the digital audio signal on HDMI.
ANALOG – Output the input signal of AUDIO(PC) jack.
AUTO – Automatically detects the HDMI digital audio. When no detect, output the input signal of AUDIO(PC) jack.
* When AUDIO(PC) jack
use in RGB PC, set to "DIGITAL".
SETUP
CONTROLS AND FUNCTIONS (cont.)
1. Press the MENU button to access menu.
2. Use the ▲/▼ button to highlight a selection.
3. Press the ▶ button to choose an item.
4. Use the ▲/▼ button to highlight a selection.
5. Use the ◀ / ▶button to adjust the setting on
a selected item.