COLOUR TELEVISION Contents HV-29ML25 Knowing your TV’s feature ............................ 2 Remote control buttons and basic functions . 3 TV buttons and functions .............................. 5 Setting up your TV ......................................... 6 Basic setting for picture ................................. 8 Advanced setting for picture .......................... 9 Original Feature for picture ......................... 10 Basic setting for sound ................................
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug.
Remote control buttons and basic functions 8 2 0 4 1 6 3 7 9 5 RM-C1390 No.Press To 1 2 3 4 5 6 Turn on or off the TV from standby mode. Display menu and confirm selected function. Select and adjust menu function. Select the desired channel number. Adjust the volume level. Select TV or VIDEO terminal input.
Remote control buttons and basic functions (continued) How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2. Display the top. Press 2/3 buttons 3 to choose a menu title. Then press MENU/OK button 2. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Press the DISPLAY/BACK button* 8. Display the 2nd menu. Display the 3rd menu. Return to the previous menu.
TV buttons and functions The illustrations shown below is for HV-29ML25 and HV-29VL25 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated.
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. VHF/UHF outdoor aerial Rear of the TV AUDIO R L/MONO VIDEO S OVER VIDEO-1 VIDEO-2 PR/CR R AUDIO PB /CB Y/VIDEO VIDEO-3/ COMPONENT L/MONO OUTPUT R AUDIO L VIDEO 75 -ohm coaxail cable (not supplied) If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable.
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or any keys, then operate the TV by following the steps as below: êìëëäàâ OK OK OK • Press 5/∞ button to select your desired language. • Press 5/∞ button to select your desired Teletext language groups. For details, see page 10. • TV will start searching for the channels.
Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. AUTO PAL SECAM NTSC4.43 NTSC3.58 To operate this function with a menu: ❇ MENU INSTALL COLOUR SYSTEM Asia, Middle East Europe Oceania Africa Country or Region Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. Indonesia, Malaysia, Singapore, Thailand, India, etc. China, Vietnam, etc. Hong Kong, etc.
Advance setting for picture BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. ❇ MENU INSTALL BLUE BACK If you wish to continue viewing the poor picture, cancel the BLUE BACK function. ZOOM You can change the screen size according to the picture aspect ratio. Choose the optimum one from three ZOOM modes.
Original features for picture TELETEXT (Except HV-29VL15 only) You can watch the Teletext broadcast channel with TEXT function. 1 Press the TEXT button to select the desired mode as follows: TV mode TEXT twin mode TEXT mode 2 Press the CHANNEL -/+ buttons, number buttons or colour buttons to select other Teletext pages. 3 Press TEXT or TV/VIDEO button to return to TV mode. You can also operate the teletext using the following buttons: (Hold) Hold a teletext page.
Basic setting for sound SOUND SYSTEM ADJUSTING THE SOUND You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. B/G I D/K M The function is not available in video mode. For the sound system in each country or region, see the table below: Area Asia, Middle East Europe Oceania Africa Country or Region Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc.
Advanced setting for sound AI VOLUME You can adjust the volume of all the channels and video inputs to the same level automatically. Select the AI VOLUME in SOUND menu, then choose ON or OFF. SOUND AI VOLUME ❇ MENU CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF HIGH Cancel the function. Listen to sound with more wider audience effect. LOW Listen to sound with less wider audience effect.
DVD FUNCTION AUTO SIGNAL DETECT When the DVD input signal is detected. The input mode will be changed to VIDEO-3 automatically. For The DVD player, press the “POWER ON” button of the machine so that the signal can be detected. For the VTR, press the “POWER ON” button of the machine, and then press the “PLAY” button, so that the signal can be detected and display DVD menu. Select the AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON).
Customized setting DIGITAL VNR CHANNEL GUARD You can reduce the picture noise. Select the DIGITAL VNR in the PICTURE menu, then choose a setting of DIGITAL VNR function. ❇ MENU PICTURE DIGITAL VNR OFF MIN AUTO MAX DIGITAL VNR is turned off. Effect of DIGITAL VNR becomes minimum level. Effect of DIGITAL VNR is automatically controlled. Effect of DIGITAL VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original picture is sharp. When you select to VIDEO-3 mode.
Customized setting (continued) To view a locked TV channel: 1 Choose a programme number in which a TV channel locked with the number buttons or PR LIST. The screen changes to blue and the (CHANNEL GUARD) appears. • You cannot choose a locked TV channel with the 5/∞ buttons. 2 Press the DISPLAY button to display “ID NO.” (ID number input screen). 3 Press the number buttons to enter the ID number. The lock is temporarily released so you can view the TV channel.
Customized setting (continued) APPEARANCE You can change format of Menu display when selecting Type of APPEARANCE in the INSTALL menu, then choose the desired setting. ❇ MENU INSTALL APPEARANCE TYPE A : Solid Form TYPE B : Light Form TYPE C : Light background Form/Solid bar VIDEO-3 SETTING You can set the VIDEO-3 SETTING according to the video signal output from the external devices connected to the VIDEO-3 terminal. Select the VIDEO-3 SETTING in INSTALL menu, then choose a setting.
TV channel presetting To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. INSTALL ❇ MENU 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically. 3 The EDIT menu appears. To edit the channel list Proceed to the Step 3 of “To edit the channel list (PR list)” on this page.
TV channel presetting (continued) To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “CH/CC number list” on this page. 1 Display the INSTALL menu. INSTALL ❇ MENU 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.
Additional preparation Connecting the external devices Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure. In addition, the device settings may be changed depending on the connection method to secure proper operation. • Turn off all the devices including the TV.
Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself. Important: • This Troubleshooting guide only covers problems whose causes are not easy to determine.
Troubleshooting (continued) POOR SOUND OTHER CONCERNS • Have you adjusted BASS or TREBLE properly? If not, follow the description “Adjusting the sound” on page 11 to try to adjust them properly. • When the TV channel reception is poor, it can be hard to hear the stereo or bilingual sound. In this case, follow the description “STEREO / I•II” on page 11 to hear the sound more easily by changing it to a mono sound.
Specifications Broadcasting systems Colour systems Channels and frequencies Sound-multiplex systems Teletext systems Languages displayed by Power requirements Audio output VIDEO-1 terminal VIDEO-2 terminal VIDEO-3/COMPONENT VIDEO-4 terminal OUTPUT terminal Headphone jack Accessories Speakers B, G, I, D, K, K1, M PAL, SECAM, NTSC3.58/4.43MHz VHF low channel (VL) = 43.25 MHz ~ 140.25 MHz VHF high channel (VH) = 147.25 MHz ~ 423.25 MHz UHF channel (U) = 431.25 MHz ~ 863.
MEMO 23 GGT0087-001A-H_E P18-23 23 6/29/05, 10:29
© 2005 Victor Company of Japan, Limited GGT0087-001A-H_E COVER 24 0705-NIC-JMT 6/29/05, 10:27
