ENGLISH WIDE LCD PANEL TV INSTRUCTIONS Contents PREPARATION Safety precautions ............................... 2 Remote control buttons and functions ... 3 Set up and connections ....................... 4 Initial settings ....................................... 6 Registering / Editing channels ............. 7 Channel Summary ............................... 7 Operating the menus ........................... 8 FUNCTIONS Picture setting ...................................... 9 Sound setting ..................
Thank you for buying this JVC LCD panel television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Follow this manual regarding setup! - Connect only to a 110-240 V, 50/60Hz AC outlet. • Make enough room for inserting and removing the power plug! • Place the TV as close to the outlet as possible! - The main power supply for this TV is controlled by inserting or removing the power plug.
Remote control buttons and functions • Insert the batteries Use two “AAA/R03” dry cell batteries. Insert the batteries from the · end, making sure the · and ª polarities are correct. WARNING: Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like. Turn the TV on from standby Colour button Turn on “Clear SD” “AAA/R03” Batteries Change the aspect ratio (P. 10) Turn the volume off/on Change channel/page RETURN PLUS function Return to the frequently viewed channel.
Set up and connections TV/VIDEO MENU/OK CHANNEL Power lamp ON : Lit (Blue) OFF : Unlit Power lamp lights while the TV is on. • “Power Lamp” (P. 13) Remote control sensor VOLUME Connect an aerial and VCR / DVD Player Switch between TV / VIDEO devices Display on-screen menu / set R Change channel / Page / Hyper Scan Function (P. 3) L V AERIAL VIDEO-2 Volume / Adjust Power On / Off To Headphone (P.
Set up and connections (continued) You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.) VIDEO-1 Watching videos Output Headphone HDMI-1 HDMI-2 DIGITAL VIDEO/AUDIO To “HDMI-1” Input · Composite signal / Component signal (P. 19) · Sound L / R To “HDMI-2” · Use Component signal “Video - 1 Setting” (P.
Initial Settings 1. 2. Turn on the TV > > OK 2. Set 2. Set • To select the new Country Area after Initial Setting has completed. • The power on the unit can also be used. MENU 1 If you select Country Area to “Area-1” 4. Select the teletext language group. > Teletext Language Select Group - 1 Group - 2 Group - 3 Group - 4 Group - 5 Group - 6 OK 4. Select Air or Cable. > Auto Program OK Air Cable 5. 2. Set > Check what was registered. > PR 01 02 03 04 05 06 07 08 09 10 6 6.
Channel Summary Registering / Editing channels This function is available when select Country Area to “Area-1” only. You can edit the channel list or register new channel manually. > Edit PR 01 02 03 04 05 06 07 08 09 10 ID Move > Move a channel position ID ID CH/CC CH 02 CH 03 CH 07 CH 76 CH 12 CH 09 CH 05 CH 02 CH 15 CH 28 ____ ____ ____ ____ ____ ____ ____ ____ ____ > (Red) 2.
Operating the menus You can select the Country Area between Area-1 and Area-2. See in item 3 of “Initial setting” (P. 6) See the menus location in the below table.
Picture setting MENU 1. Select Picture OK 2. Enter Picture Mode 1. Select 2. Adjust > OK > Cool 1. Select OK 3. Finish 2. Enter : Softens contrast and sharpness. You can change the backlight brightness. Darker Brighter You can change the contrast of the picture. Lower Higher Bright You can change the brightness of the picture. Darker Brighter Detail You can change the sharpness of the picture. Sharper Softer Color You can change the color of the picture.
Picture setting (continued) Finer Picture adjustment > Features Clear SD Digital VNR DigiPure Pull Down Color Management Picture Management Color System Zoom > > > off off off off off off > Clear SD : For clearly picture (Off / Mode-1 / Mode-2) When Clear SD set to Mode-1 or Mode-2, then Digital VNR and DigiPure and Picture Management cannot operate. Digital VNR Features : Reduce the amount of noise in original picture.
Sound setting 2. Select item and setting or adjust. • Set Country Area to “Area-1” • Set Country Area to “Area-2” 1. Select MENU Sound Sound Stereo / I II Bass Treble Balance Cinema Surround ■ OK > 1. Display “Sound” menu. I II Mono > Off 2. Enter Stereo / I II ■ 1. Select 2. Adjust Sound MTS Stereo On Air SAP Bass Treble Balance Cinema Surround Mono OK Off 3.
Useful functions 2. Select item and setting or adjust. 1. Display “Features” menu. Features 1. Select MENU On Timer Sleep Timer Channel Guard Blue Back Child Lock Auto Shutoff Favorite Setting Power Lamp Eco Mode OK Features 2. Enter Note : Press Sleep Timer TV to turn off automatically to standby mode after a set time. Channel Guard Stop children from watching specific channels. 12 02 >> 00 : 00 Off Off Off 2. Enter 3. Finish Off Off OK 2. Set (Blue) OK OK 1.
Useful functions (continued) Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (On / Off) Child Lock Disables the side control buttons of the TV. (On / Off) Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (On / Off) Delete the favorite channel that you registered. > Favorite Setting Favorite Setting 1 2 3 (Blue) 1.
Viewing Teletext Viewing Closed Caption This function is available when select Country Area to “Area-1” only. You can watch the Teletext broadcast channel with Text Functions. 1. TV mode <--> TEXT mode This function is available when select Country Area to “Area-2” only. Select the input Source. 1. Select “Set Up” 2. Select a teletext page by press number button (0-9) 1. Select MENU CHANNEL • Move up or down a page by OK Set Up 2. Enter Bookmark your favorite page.
Watching Video or DVDs Select the input Source. 1. Select AV Select TV/VIDEO 0 1 2 3 4 5 01 Video - 1 Video - 2 HDMI 1 HDMI 2 PC OK Note: TV/VIDEO button select the video source by move down or use button 0-5 for selection. 2. Set • Operate the connected device and play video. 1. Select “Set Up” 1. Select MENU OK Set Up 2. Enter 2. Select item 1. Select item 2.
Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. Severe noise or snow Check the aerial cable and TV connections . Check the direction of the aerial. Check the aerial or its cable damaged or not. Patterns, stripes or noise Interference caused by devices such as an amplifier, personal computer, or a hair drier, Move it away from TV.
Technical information Language group for teletext Group PC Signals that can be displayed • Languages Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech, Slovak, English, German Group-4 Arabic, Czech, Slovak, Hungaria
CH / CC List This information is used for Area-1 setting only. To use the Insert function (P. 7), find the “CH/CC” number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
Specification Main unit Model Terminals / Connectors LT-32EX18 LT-42EX18 Broadcasting systems For Area-1 setting : B / G / I / D / K / M For Area-2 setting : M / N Color systems For Area-1 setting : PAL / SECAM / NTSC 3.58 / NTSC 4.43 MHz For Area-2 setting : NTSC / PAL-M / PAL-N Channels and frequencies Area-1 VHF low channel ( VL) =46.25 to 140.25 MHz VHF high channel ( VH) = 147.25 to 423.25 MHz UHF channel ( U ) = 431.25 to 863.25 MHz Area-2 VHF low channel ( VL) =55.25 to 127.
© 2008 Victor Company of Japan, Limited 0208WKT-NF-MT