Digital Video Camera Instructions

88 EN
INDEX Indications
LCD Monitor/Viewfinder Indications During Video Recording Only
1 Appears when in the Squeeze or Cinema mode.
(Z pg. 40)
2 Displays the selected Fade/Wipe effect.
(Z pg. 48, 49)
3 Rotates while the tape is running. (Z pg. 18)
4 Displays the recording mode (SP or LP).
(Z pg. 13)
5 Displays the tape remaining time. (Z pg. 18)
6 •“REC” appears during recording.
•“PAUSE” appears during Record-Standby mode.
(Z pg. 18)
7 Appears when the wind cut mode is engaged to
cut down on noise created by wind. (Z pg. 40)
8 Appears when the Insert Editing (w) or Insert
Editing Pause (6w) mode is engaged. (Z pg. 68)
9 Displays the sound mode for approx. 5 seconds
after turning on the camcorder. (Z pg. 39)
0 Displays the Time Code. (Z pg. 20, 41)
1 Displays the Image Size mode of the stored
image. There are 2 modes available:
XGA and VGA (in order of quality) (Z pg. 15)
2 Appears and blinks during shooting. (Z pg. 26)
3 Displays the Picture Quality mode of the stored
image. There are 2 modes available:
FINE and STD (standard) (in order of quality)
(Z pg. 15)
4 •Appears during shooting.
•Blinks when a memory card is not loaded.
(Z pg. 26)
5 Displays the number of images that have
already been shot. (Z pg. 26)
6 Displays the total number of shots that can
be stored, including those already taken.
(Z pg. 26)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
(GR-DVX78 only)
SO
2
U
0
N
:
D
55
12 BIT
PLP
50
R
min
EC
6w
1
2 4 56
87
3
90
FINE
10/100
1
2
3
4 5 6
VGA