Connection Guide

20
Setting Up You Camera's DDNS Account
(1) Using Internet Explorer, go into your camera’s Settings.
URL to access Settings: http://(camera’s IP address):8000
Ex. Enter http://192.168.1.100:8000 into the address bar.
The camera’s IP address varies depending on your network environment.
Use the following method if you do not know your camera’s IP address:
(i) Open JVC CAM Control on your computer.
(ii) Check the camera’s IP address displayed on the right.
• JVC CAM Control must be installed on your computer in advance.
The computer and camera should be connected to the same Wi-Fi router.
• If you cannot nd your camera’s IP address (if it is not displayed) even
when using JVC CAM Control, refer to the Settings screen on your router.
Note
2