Video Printer Instructions

32
ERROR MESSSAGES
CLOSE DOOR
PAPER JAM
POWER OFF/REMOVE PAPER
LOAD INK SHEET
REMOVE PAPER
HIGH TEMPERATURE
WAIT A WHILE
MEMORY FULL
STOP PLAYBACK MACHINE
NO SIGNAL
NOW PRINTING
NO IMAGE IN MEMORY
v When the lid is not securely closed.
m Press PUSH to close the lid (Z pg. 10).
v When a print sheet or the ink sheet is caught inside
the printer.
m Open the lid, remove the ink sheet cartridge, then
remove the problem sheet (Z pg. 10).
v There is no ink sheet cartridge installed, or the one
installed is used up.
m Install an ink sheet cartridge (Z pg. 10).
v When you turn on the power and there is a print
sheet inside the printer.
m Open the lid and remove the print sheet (Z pg. 10).
v When the printer’s temperature gets too high and
printing becomes impossible.
m Turn off the power, wait a few minutes and then turn
it on again.
Confirm that the error message has disappeared
before trying to use the printer.
v When you press MEMORY after having stored the
selected number of snapshots, or when you have
stored 8 Edit-In and 8 Edit-Out points.
m Start printing, or access the Mode Select Menu
screen (Z pg. 27).
v When you have stored the selected number of
snapshots.
m Start printing, or access the Mode Select Menu
screen (Z pg. 28).
v When you press MEMORY without having
connected an image source.
m Make sure the image source is properly connected,
then engage its Play mode [or Record mode if using
a camcorder].
v When printing is being performed.
m Disappears when printing is finished.
v When you try to print without having stored a
scene.
m Remove the print sheet, then store a scene using any
of the described methods.
Message
v Appears in this situation
m How to clear indication