MICRO COMPONENT SYSTEM UX-P30 —Consists of CA-UXP30 and SP-UXP30 CD-R/RW PLAYBACK M I C R O C O M P O N E N T S Y S T E M U X - P 3 0 SOUND AHB PRO STANDBY/ON VOLUME DISPLAY SLEEP PROG RANDOM REPEAT SOUND MODE AUTO PRESET FM MODE CD 3/8 TAPE 23 FM/AM AUX 4 7 ¢ + FM/AM CLOCK TAPE CD – STANDBY AUX TIMER CD CANCEL MULTI KEY REV.MODE SET REC AHB PRO PHONES VOLUME RM-SUXP3U REMOTE CONTROL SP-UXP30 CA-UXP30 SP-UXP30 INSTRUCTIONS GVT0115-005A [A] COVER_UX-P30[A]f.
Warnings, Cautions and Others CAUTION— (standby/on) button! Disconnect the mains plug to shut the power off completely. The (standby/on) button in any position does not disconnect the mains line. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION • Do not block the ventilation openings or holes.
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. About This Manual This manual is organized as follows: • The manual mainly explains operations using the buttons on the remote control.
Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started ............................................................ 6 Supplied Accessories .................................................. 6 Putting the Batteries into the Remote Control ........... 6 Connecting Antennas .................................................
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel Front Panel p 1 CD-R/RW PLAYBACK M I C R O C O M P O N E N T S Y S T E M U X - P 3 0 SOUND q AHB PRO w e 2 VOLUME 3 4 5 – STANDBY CD 3/8 CLOCK 6 7 TAPE 23 FM/AM 4 7 + AUX r TIMER t ¢ y REV.MODE u 8 REC i PHONES 9 3 EN01-08_UX-P30[A]f.pm6 3 03.6.
Continued Display Window 2 1 3 [DAILY REC SLEEP] REC CLOCK PRGM RANDOM 4 ALL 5 BASS SOUND MONO ST 6 7 8 9 See pages in the parentheses for details.
Remote Control See pages in the parentheses for details.
Getting Started Continued Supplied Accessories Connecting Antennas Make sure that you have all the following items. The number in the parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) FM antenna If anything is missing, consult your dealer immediately.
Connecting Speakers AM antenna ] ] 1 3 2 ANTENNA Vinyl-covered wire (not supplied) 1 Red RIGHT LEFT MAIN SPEAKERS AM EXT AM LOOP Speaker cord SPEAKER IMPEDANCE MIN 4 Speaker cord Black FM 75 COAXIAL Right speaker 2 AM loop antenna (supplied) Left speaker 1 Press and hold the clamp of the speaker terminal on the rear of the unit. 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 2 Turn the AM loop antenna until you have the best reception.
Connecting Other Equipment You can connect audio equipment—used only as a playback device. • DO NOT connect any equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. To connect audio equipment Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.
Common Operations Turning On the Power 2 When you press the play button—CD 3/8, TAPE 2 3 or the source selecting button—FM/AM and AUX, the unit automatically turns on and starts playback if the source is ready. To turn on the unit, press STANDBY/ON unit). The STANDBY lamp on the unit goes out. STANDBY/ON (or Press ¢ or 4 to adjust the hour, then press CLOCK. 7 4 ¢ The minute digits start flashing on the display.
Adjusting the Volume Selecting the Sound Modes You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOLUME 0” and “VOLUME 40.” You can select one of the 4 preset sound modes. This function only affects the playback sound, but does not affect your recording. – When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.
Listening to FM and AM Broadcasts Tuning in a Station 1 2 Presetting Stations The unit automatically turns on and tunes in the previously tuned station—either FM or AM. • Each time you press the button, the band alternates between FM and AM. You can preset 30 FM and 15 AM stations—using either automatic presetting or manual presetting. In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment.
To preset stations manually—Manual Presetting Tuning in a Preset Station • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again. On the remote control ONLY: On the remote control ONLY: 1 1 2 Tune in the station you want to preset. • See “Tuning in a Station” on page 11. SET Press SET. 2 3 Press MULTI KEY > or MULTI KEY < to select a preset number. 4 Press SET again. Press FM/AM.
Playing Back Discs (CD/CD-R/CD-RW) This unit has been designed to playback the following discs—CD, CD-R, and CD-RW. Continued use of irregular shape discs (heart-shape, octagonal, etc.) can damage the unit. General Notes In general, you will have the best performance by keeping your discs and the mechanism clean. • Store discs in their cases, and keep them in cabinets or on shelves. • Keep the unit’s disc tray closed when not in use.
Continued Basic Disc Operations 3 While playing a disc, you can do the following operations. Press MULTI KEY > or MULTI KEY < to select the track number, then press SET. MULTI KEY SET To stop play for a moment Press CD 3/8. While pausing, the elapsed playing time flashes on the display. To resume playing, press CD 3/8 again. CD PRGM To go to another track Press MULTI KEY > / MULTI KEY < or ¢ / 4 repeatedly before or during playback.
Playing at Random—Random Play Prohibiting Disc Ejection—Tray Lock The tracks will play in no particular order when you use this mode. You can lock the disc tray and prohibit to eject the disc. • This is possible only while the unit is turned on. On the remote control ONLY: To use Random play mode, press RANDOM before or during playing. The RANDOM indicator lights up on the display. RANDOM On the unit ONLY: To prohibit disc ejection, press (standby/on) while holding 7.
Playing Back Tapes To stop playing, press 7. You can play back type I tapes. Playing Back a Tape 1 To fast-wind to the left or to the right, press ¢ or 4 while the tape is not running. The tape direction indicator (3 or 2) starts flashing quickly on the display. Press ) on the unit. To remove the cassette, press ) on the unit. O A U T E E R S R E V To play both sides—Reverse Mode You can set the deck to play just one side of a tape, both sides once, or both sides continuously.
Recording Recording on a Tape IMPORTANT: • It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. • The recording level is automatically set correctly, so it is not affected by the VOLUME, AHB (Active Hyper Bass) PRO, and SOUND MODE settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. • If recordings you have made have excessive noise or static, the unit may be too close to a TV.
Disc Direct Recording One Track Recording Everything on the disc goes onto the tape in the same order as it is on the disc, or according to the order you have made for Program play. This recording method is convenient when you record tracks while playing a disc. You can only record your favorite songs on the tape. On the unit ONLY: On the unit ONLY: 1 1 Put a recordable cassette in with the exposed part of the tape down.
Using the Timers There are three timers available—Daily Timer, Recording Timer, and Sleep Timer. Before using the timers, you need to set the clock built in the unit (see page 9). When you press TIMER on the unit for more than 3 seconds, the display alternates between “ADJUST” and “CLOCK” for about 5 seconds. Using Daily Timer and Recording Timer 3 4 You can set the timer whether the unit is on or off.
6 7 TIMER Press TIMER to complete the timer setting. Press (standby/on) to turn off the unit (on standby) if you have set the timer with the unit turned on. Using Sleep Timer With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on. STANDBY • When the timer turns on the unit, the timer ( ) indicator and the selected timer mode indicator (DAILY or REC) start flashing.
Maintenance To get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling discs Cleaning the unit • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc. • Put the disc back in its case after use to prevent warping. • Be careful not to scratch the surface of the disc when placing it back in its case.
Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Cause No sound is heard. Action • Connections are incorrect or loose. • Headphones are connected. • The AM loop antenna is too close to the unit. • The FM antenna is not properly extended and positioned.
UX-P30 MICRO COMPONENT SYSTEM VICTOR COMPANY OF JAPAN, LIMITED EN 0603MWMMDWJEM © 2003 VICTOR COMPANY OF JAPAN, LIMITED COVER_UX-P30[A]f.pm6 2 03.6.