User Manual

TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Generator
For setting the operation of the time code.
0
Free Run(GPS)L:
Time code
information can be synchronized with
the date/time information acquired from the
GPS.
0
Free Run(Ext):
External time code input will be synchronized
with this and the time code will be recorded.
0
Free Run:
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
0
Rec Run:
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
0
Regen:
The time code operates in the run mode during
recording. When the SD card is replaced, the
last time code recorded on the card is read and
recorded on a new card so that the time code
continues in running order.
[Setting Values: Free Run(GPS), L, Free
Run(Ext), Free Run, RRec Run, Regen]
Memo :
0
When [Rec Mode] is configured to “Interval
Rec” or “Frame Rec”, only “Rec Run” and
“Regen
” are selectable.
0
When [System] is configured to “High-Speed”,
only “Rec Run” and “Regen” are selectable.
0
When [Frame Rate] is set to
“24p”, “Free
Run(GPS)” cannot be selected.
TC Preset
For setting the time code (hour, minute, second,
frame).
Display :
Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
(A P77 [Setting Time Code Generator] )
UB Mode
For setting the recording mode of the user’s bit.
0
Date:
Records the date.
0
Time:
Records the time.
0
Preset:
Records according to the preset setting.
(A P80 [Setting the User’s Bit] )
[Setting Values: Date, Time, R
Preset]
Memo :
0
If [UB Mode] is set to “Time”, the user’s bit
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
9
Preset
For setting the user’s bit. (Digit by digit)
Display
:
AB CD EF 01
(A P80 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to “Date” or “Time
”, this
item appears as “---” and preset is disabled.
0
When [TC
Generator
] is set to “Regen”, this item
appears as “<Regen>” and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame mode.
Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
0
This item can be set only when [System]
B
[Record Set] B [Record Format] B [WFrame
Rate] is set to “60p”, “30p”, or “60i”.
However, when “Free Run(GPS)” is selected for
[TC Generator], this item is fixed at “Drop” and
cannot be selected. L
0
When [Frame Rate] is “24p
”, “Non Drop
”
becomes fixed and cannot be selected.
0
When [Frame Rate
] is “50p”, “25p”, or “50i”, this
item appears as “---” and cannot be selected.
(A P
151 [WFrame Rate/ G
Frame Rate] )
124
TC/UB Menu
Menu Display and Detailed Settings