User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Network Menu
For specifying network-related settings.
The display of the software keyboard for input
varies according to the item you are setting.
Connection Setup...
For configuring the network connection settings.
A [
Wizard] screen will appear according to the
mode of connection. Follow the instructions to
perform the setting.
The preconfigured settings can be loaded, saved
or deleted.
(A P136 [Connection Setup Item] )
Memo :
0
Users cannot access this menu in the following
cases.
0
During manual FTP transfer
0
During live streaming
0
Return over IP in Progress
Live Streaming...
For configuring settings for distributing live video
images and audio.
(A P137 [Live Streaming Item] )
Memo :
0
Users cannot access this menu in the following
cases.
0
When [Record Format] B
[System] is set to a
setting other than “HD” or “SD”
0
During FTP transfer
0
When [Record
Format
] B [Frame Rate] is set
to “24p”
Return over IP...
For configuring settings related to Return over IP.
This function
allows video and audio to be received
via the network.
(A P139 [Return over IP Item] )
Memo :
0
Users cannot access this menu in the following
cases.
0
When [Record Format] B
[System] is set to a
setting other than “HD” or “SD”
0
When [Record
Format
] B [Frame Rate] is set
to “24p”
0
When [Overlay Settings] B [Overlay
Function
]
is set to “Enable”A L
0
When [Record Set
]
B [Time Stamp] is set to
“On”
Web...
For setting the functions that make use of the web
browser.
(A P141 [Web Item] )
Metadata Server...
For registering the FTP server for importing the
metadata and the path of the file to be imported.
Up to 4 settings can be registered.
(A P
142 [Metadata Server Item] )
Upload Settings...
For configuring the method for uploading to the
FTP server as well as the server and directory for
uploading the
clip recorded in the media to the FTP
server.
(A P142 [Upload Settings Item] )
Import Metadata
0
For importing metadata from the FTP server.
0
Metadata loaded by the setup files (“User File”/
“All File
”) will be deleted.
(A
P180 [Importing Metadata] )
Memo :
0
This option is not selectable if the network
connection is not established.
0
This option is not selectable while using the
network.
Network Menu
135
Menu Display and Detailed Settings